summaryrefslogtreecommitdiffstats
path: root/docs/3-Usage.md
diff options
context:
space:
mode:
authorRomain Forlot <romain.forlot@iot.bzh>2017-05-23 22:53:28 +0200
committerRomain Forlot <romain.forlot@iot.bzh>2017-05-23 22:53:28 +0200
commitce53e9102f8fc9d28ed706b977c30a5258e7d0c3 (patch)
treea810db1453ff6dd8a9028d1b338e939e6cc44771 /docs/3-Usage.md
parentc3c61544e91bf456ffbda96df4f5fff45d1bc12f (diff)
Update the doc
Change-Id: I5b403be18a82072bb68b0b01d2ad576de4fb5014 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Diffstat (limited to 'docs/3-Usage.md')
-rw-r--r--docs/3-Usage.md54
1 files changed, 23 insertions, 31 deletions
diff --git a/docs/3-Usage.md b/docs/3-Usage.md
index 73600a72..5bea1d9d 100644
--- a/docs/3-Usage.md
+++ b/docs/3-Usage.md
@@ -30,7 +30,7 @@ loop1
253:4 0 10G 0 dm /var/lib/docker/devicemapper/mnt/e9f80849a2681e18549d3a4238cbf031e44052e36cd88a0abf041804b799b61c
sdb 8:16 0 238.5G 0 disk
├─sdb2 8:18 0 238G 0 part
-│ └─Shamash-agl 253:1 0 238G 0 lvm /home/claneys/Workspace/agl-docker
+│ └─agl 253:1 0 238G 0 lvm /home/claneys/Workspace/agl-docker
└─sdb1 8:17 0 500M 0 part /boot
sr0 11:0 1 1024M 0 rom
loop0 7:0 0 100G 0 loop
@@ -41,8 +41,8 @@ sdc
└─sdc1 8:33 1 2G 0 part /run/media/claneys/97f418a5-612f-44e9-b968-a19505695151
sda 8:0 0 931.5G 0 disk
├─sda2 8:2 0 500G 0 part
-│ ├─Shamash-home 253:2 0 150G 0 lvm /home
-│ └─Shamash-root 253:0 0 50G 0 lvm /
+│ ├─home 253:2 0 150G 0 lvm /home
+│ └─root 253:0 0 50G 0 lvm /
└─sda1 8:1 0 16G 0 part [SWAP]
```
@@ -131,47 +131,39 @@ The instructions will be the same:
## Configure the binding
-Configure the binding specifying in the JSON configuration file the CAN device\(s\) that it will to connect to. Edit file _/var/lib/afm/applications/low-can-binding/0.1/can\_buses.json_ and change the CAN device name to the one you will use :
+The binding reads system configuration file _/etc/dev-mapping.conf_ at start to map logical name from signals described in JSON file to linux devices name initialized by the system.
+Edit file _/etc/dev-mappping.conf_ and add mapping in section `CANbus-mapping` :
Using virtual CAN device as described in the previous chapter:
-```json
-{
- "canbus": "vcan0"
-}
+```ini
+[CANbus-mapping]
+hs="vcan0"
+ls="vcan1"
```
Using real CAN device, this example assume CAN bus traffic will be on can0.
-```json
-{
- "canbus": "can0"
-}
+```ini
+[CANbus-mapping]
+hs="can0"
+ls="can1"
```
On a Porter board there is an embedded CAN device so `can0` already exists.
So you might want to use your USB CAN adapter plugged to the OBD2 connector, in this case use `can1`:
-```json
-{
- "canbus": "can1"
-}
-```
-
-If you have several specify CAN bus devices use an array:
-
-```json
-{
- "canbus": [ "can0", "can1" ]
-}
+```ini
+[CANbus-mapping]
+hs="can1"
```
-> **CAUTION VERY IMPORTANT:** Make sure the CAN bus\(es\) you specify in your configuration file match those specified in your generated source file with the [can-config-generator](http://github.com/iotbzh/can-config-generator).
+> **CAUTION VERY IMPORTANT:** Make sure the CAN bus\(es\) you specify in your configuration file match those specified in your generated source file with the `CAN-config-generator`.
## Run it, test it, use it !
You can run the binding using **afm-util** tool, here is the classic way to go :
```bash
-# afm-util run low-can-binding@0.1
+# afm-util run low-can-binding@1.0
1
```
@@ -182,14 +174,14 @@ But you can't control nor interact with it because you don't know security token
So, to test it, it is better to launch the binding manually. In the following example, we will use port **1234** and left empty security token for testing purpose:
```bash
-# afb-daemon --ldpaths=/usr/lib/afb:/var/lib/afm/applications/low-can-binding/0.1/libs/ --rootdir=/var/lib/afm/applications/low-can-binding/0.1/ --port=1234 --token=
+# afb-daemon --ldpaths=/usr/lib/afb:/var/lib/afm/applications/low-can-binding/1.0/libs/ --rootdir=/var/lib/afm/applications/low-can-binding/1.0/ --port=1234 --token=1
NOTICE: binding [/usr/lib/afb/afb-dbus-binding.so] calling registering function afbBindingV1Register
NOTICE: binding /usr/lib/afb/afb-dbus-binding.so loaded with API prefix dbus
NOTICE: binding [/usr/lib/afb/authLogin.so] calling registering function afbBindingV1Register
NOTICE: binding /usr/lib/afb/authLogin.so loaded with API prefix auth
-NOTICE: binding [/var/lib/afm/applications/low-can-binding/0.1/libs//low-can-binding.so] calling registering function afbBindingV1Register
-NOTICE: binding /var/lib/afm/applications/low-can-binding/0.1/libs//low-can-binding.so loaded with API prefix low-can
-NOTICE: Waiting port=1234 rootdir=/var/lib/afm/applications/low-can-binding/0.1/
+NOTICE: binding [/var/lib/afm/applications/low-can-binding/1.0/libs//low-can-binding.so] calling registering function afbBindingV1Register
+NOTICE: binding /var/lib/afm/applications/low-can-binding/1.0/libs//low-can-binding.so loaded with API prefix low-can
+NOTICE: Waiting port=1234 rootdir=/var/lib/afm/applications/low-can-binding/1.0/
NOTICE: Browser URL= http:/*localhost:1234
NOTICE: vcan0 device opened and reading {binding low-can}
NOTICE: Initialized 1/1 can bus device(s) {binding low-can}
@@ -198,7 +190,7 @@ NOTICE: Initialized 1/1 can bus device(s) {binding low-can}
On another terminal, connect to the binding using previously installed _**AFB Websocket CLI**_ tool:
```bash
-# afb-client-demo ws://localhost:1234/api?token=
+# afb-client-demo ws://localhost:1234/api?token=1
```
You will be on an interactive session where you can communicate directly with the binding API.