Separation Generator to a dedicated repo

Change-Id: Id94831651c3266861435272a6e36c7884bef2c45
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

4 files changed, 131 insertions, 0 deletions

diff --git a/libs/nanopb/examples/simple/Makefile b/libs/nanopb/examples/simple/Makefile
new file mode 100644
index 00000000..970a8650
--- /dev/null
+++ b/libs/nanopb/examples/simple/Makefile
@@ -0,0 +1,22 @@
+# Include the nanopb provided Makefile rules
+include ../../extra/nanopb.mk
+
+# Compiler flags to enable all warnings & debug info
+CFLAGS = -Wall -Werror -g -O0
+CFLAGS += -I$(NANOPB_DIR)
+
+# C source code files that are required
+CSRC  = simple.c                   # The main program
+CSRC += simple.pb.c                # The compiled protocol definition
+CSRC += $(NANOPB_DIR)/pb_encode.c  # The nanopb encoder
+CSRC += $(NANOPB_DIR)/pb_decode.c  # The nanopb decoder
+CSRC += $(NANOPB_DIR)/pb_common.c  # The nanopb common parts
+
+# Build rule for the main program
+simple: $(CSRC)
+	$(CC) $(CFLAGS) -osimple $(CSRC)
+
+# Build rule for the protocol
+simple.pb.c: simple.proto
+	$(PROTOC) $(PROTOC_OPTS) --nanopb_out=. simple.proto
+
diff --git a/libs/nanopb/examples/simple/README.txt b/libs/nanopb/examples/simple/README.txt
new file mode 100644
index 00000000..ee77bfc7
--- /dev/null
+++ b/libs/nanopb/examples/simple/README.txt
@@ -0,0 +1,29 @@
+Nanopb example "simple"
+=======================
+
+This example demonstrates the very basic use of nanopb. It encodes and
+decodes a simple message.
+
+The code uses four different API functions:
+
+  * pb_ostream_from_buffer() to declare the output buffer that is to be used
+  * pb_encode() to encode a message
+  * pb_istream_from_buffer() to declare the input buffer that is to be used
+  * pb_decode() to decode a message
+
+Example usage
+-------------
+
+On Linux, simply type "make" to build the example. After that, you can
+run it with the command: ./simple
+
+On other platforms, you first have to compile the protocol definition using
+the following command::
+
+  ../../generator-bin/protoc --nanopb_out=. simple.proto
+
+After that, add the following four files to your project and compile:
+
+  simple.c  simple.pb.c  pb_encode.c  pb_decode.c
+
+
diff --git a/libs/nanopb/examples/simple/simple.c b/libs/nanopb/examples/simple/simple.c
new file mode 100644
index 00000000..1f6b1373
--- /dev/null
+++ b/libs/nanopb/examples/simple/simple.c
@@ -0,0 +1,71 @@
+#include <stdio.h>
+#include <pb_encode.h>
+#include <pb_decode.h>
+#include "simple.pb.h"
+
+int main()
+{
+    /* This is the buffer where we will store our message. */
+    uint8_t buffer[128];
+    size_t message_length;
+    bool status;
+    
+    /* Encode our message */
+    {
+        /* Allocate space on the stack to store the message data.
+         *
+         * Nanopb generates simple struct definitions for all the messages.
+         * - check out the contents of simple.pb.h!
+         * It is a good idea to always initialize your structures
+         * so that you do not have garbage data from RAM in there.
+         */
+        SimpleMessage message = SimpleMessage_init_zero;
+        
+        /* Create a stream that will write to our buffer. */
+        pb_ostream_t stream = pb_ostream_from_buffer(buffer, sizeof(buffer));
+        
+        /* Fill in the lucky number */
+        message.lucky_number = 13;
+        
+        /* Now we are ready to encode the message! */
+        status = pb_encode(&stream, SimpleMessage_fields, &message);
+        message_length = stream.bytes_written;
+        
+        /* Then just check for any errors.. */
+        if (!status)
+        {
+            printf("Encoding failed: %s\n", PB_GET_ERROR(&stream));
+            return 1;
+        }
+    }
+    
+    /* Now we could transmit the message over network, store it in a file or
+     * wrap it to a pigeon's leg.
+     */
+
+    /* But because we are lazy, we will just decode it immediately. */
+    
+    {
+        /* Allocate space for the decoded message. */
+        SimpleMessage message = SimpleMessage_init_zero;
+        
+        /* Create a stream that reads from the buffer. */
+        pb_istream_t stream = pb_istream_from_buffer(buffer, message_length);
+        
+        /* Now we are ready to decode the message. */
+        status = pb_decode(&stream, SimpleMessage_fields, &message);
+        
+        /* Check for errors... */
+        if (!status)
+        {
+            printf("Decoding failed: %s\n", PB_GET_ERROR(&stream));
+            return 1;
+        }
+        
+        /* Print the data contained in the message. */
+        printf("Your lucky number was %d!\n", message.lucky_number);
+    }
+    
+    return 0;
+}
+
diff --git a/libs/nanopb/examples/simple/simple.proto b/libs/nanopb/examples/simple/simple.proto
new file mode 100644
index 00000000..5c73a3b2
--- /dev/null
+++ b/libs/nanopb/examples/simple/simple.proto
@@ -0,0 +1,9 @@
+// A very simple protocol definition, consisting of only
+// one message.
+
+syntax = "proto2";
+
+message SimpleMessage {
+    required int32 lucky_number = 1;
+}
+