Change directory architecture to use 2 separated projects.

Each projects, binder and generator, has to be compiled separatly.
CAN-binder will host high and low level binding
CAN-config-generator only the generator used for low level binding.
build.sh script just launch both build in their respective dir.

Change-Id: Ic77932660fcca507b23a631d4e4e790f608880ae
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

1 files changed, 0 insertions, 158 deletions

diff --git a/low-can-binding/can/can-signals.hpp b/low-can-binding/can/can-signals.hpp
deleted file mode 100644
index 34ebeebd..00000000
--- a/low-can-binding/can/can-signals.hpp
+++ /dev/null
@@ -1,158 +0,0 @@
-///
-/// Copyright (C) 2015, 2016 "IoT.bzh"
-/// Author "Romain Forlot" <romain.forlot@iot.bzh>
-///
-/// Licensed under the Apache License, Version 2.0 (the "License");
-/// you may not use this file except in compliance with the License.
-/// You may obtain a copy of the License at
-///
-///	 http://www.apache.org/licenses/LICENSE-2.0
-///
-/// Unless required by applicable law or agreed to in writing, software
-/// distributed under the License is distributed on an "AS IS" BASIS,
-/// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-/// See the License for the specific language governing permissions and
-/// limitations under the License.
-///
-
-#pragma once
-
-#include <map>
-#include <mutex>
-#include <queue>
-#include <vector>
-#include <string>
-
-#include "openxc.pb.h"
-#include "../utils/timer.hpp"
-#include "can-bus.hpp"
-#include "can-message.hpp"
-#include "can-message-definition.hpp"
-#include "../diagnostic/diagnostic-message.hpp"
-
-extern "C"
-{
-	#include <afb/afb-binding.h>
-	#include <afb/afb-event-itf.h>
-}
-
-#define MESSAGE_SET_ID 0
-
-class can_signal_t;
-
-///
-/// @brief The type signature for a CAN signal decoder.
-///
-/// A SignalDecoder transforms a raw floating point CAN signal into a number,
-/// string or boolean.
-///
-/// @param[in] signal - The CAN signal that we are decoding.
-/// @param[in] signals - The list of all signals.
-/// @param[in] signalCount - The length of the signals array.
-/// @param[in] value - The CAN signal parsed from the message as a raw floating point
-///	value.
-/// @param[out] send - An output parameter. If the decoding failed or the CAN signal should
-///	not send for some other reason, this should be flipped to false.
-///
-/// @return a decoded value in an openxc_DynamicField struct.
-///
-typedef openxc_DynamicField (*SignalDecoder)(can_signal_t& signal,
-		const std::vector<can_signal_t>& signals, float value, bool* send);
-
-///
-/// @brief: The type signature for a CAN signal encoder.
-///
-/// A SignalEncoder transforms a number, string or boolean into a raw floating
-/// point value that fits in the CAN signal.
-///
-/// @param[in] signal - The CAN signal to encode. 
-/// @param[in] value - The dynamic field to encode.
-/// @param[out] send - An output parameter. If the encoding failed or the CAN signal should
-/// not be encoded for some other reason, this will be flipped to false.
-///
-typedef uint64_t (*SignalEncoder)(can_signal_t* signal,
-		openxc_DynamicField* value, bool* send);
-
-class can_signal_t
-{
-private:
-	std::uint8_t message_set_id_;
-	std::uint8_t message_id_;
-	std::string generic_name_; /*!< generic_name_ - The name of the signal to be output.*/
-	static std::string prefix_; /*!< prefix_ - generic_name_ will be prefixed with it. It has to reflect the used protocol.
-						  * which make easier to sort message when the come in.*/
-	uint8_t bit_position_; /*!< bitPosition_ - The starting bit of the signal in its CAN message (assuming
-										*	non-inverted bit numbering, i.e. the most significant bit of
-										*	each byte is 0) */
-	uint8_t bit_size_; /*!< bitSize_ - The width of the bit field in the CAN message. */
-	float factor_; /*!< factor_ - The final value will be multiplied by this factor. Use 1 if you
-							*	don't need a factor. */
-	float offset_; /*!< offset_ - The final value will be added to this offset. Use 0 if you
-							*	don't need an offset. */
-	float min_value_; /*!< min_value_ - The minimum value for the processed signal.*/
-	float max_value_; /*!< max_value_ - The maximum value for the processed signal. */
-	frequency_clock_t frequency_; /*!< frequency_ - A frequency_clock_t struct to control the maximum frequency to
-								*	process and send this signal. To process every value, set the
-								*	clock's frequency to 0. */
-	bool send_same_; /*!< send_same_ - If true, will re-send even if the value hasn't changed.*/
-	bool force_send_changed_; /*!< force_send_changed_ - If true, regardless of the frequency, it will send the
-							   * value if it has changed. */
-	std::map<uint8_t, std::string> states_; /*!< states_ - A map of CAN signal state describing the mapping
-										 * between numerical and string values for valid states. */
-	bool writable_; /*!< writable - True if the signal is allowed to be written from the USB host
-					 *	back to CAN. Defaults to false.*/
-	SignalDecoder decoder_; /*!< decoder_ - An optional function to decode a signal from the bus to a human
-							 * readable value. If NULL, the default numerical decoder is used. */
-	SignalEncoder encoder_; /*!< encoder_ - An optional function to encode a signal value to be written to
-							 * CAN into a byte array. If NULL, the default numerical encoder
-							 * is used. */
-	bool received_; /*!< received_ - True if this signal has ever been received.*/
-	float last_value_; /*!< lastValue_ - The last received value of the signal. If 'received' is false,
-						*	this value is undefined. */
-
-public:
-	can_signal_t(
-		std::uint8_t message_set_id,
-		std::uint8_t message_id,
-		std::string generic_name,
-		uint8_t bit_position,
-		uint8_t bit_size,
-		float factor,
-		float offset,
-		float min_value,
-		float max_value,
-		frequency_clock_t frequency,
-		bool send_same,
-		bool force_send_changed,
-		std::map<uint8_t, std::string> states,
-		bool writable,
-		SignalDecoder decoder,
-		SignalEncoder encoder,
-		bool received);
-
-	const can_message_definition_t& get_message() const;
-	const std::string& get_generic_name() const;
-	const std::string get_name() const;
-	const std::string& get_prefix() const;
-	uint8_t get_bit_position() const;
-	uint8_t get_bit_size() const;
-	float get_factor() const;
-	float get_offset() const;
-	float get_min_value() const;
-	float get_max_value() const;
-	frequency_clock_t& get_frequency();
-	bool get_send_same() const;
-	bool get_force_send_changed() const;
-	const std::map<uint8_t, std::string>& get_states() const;
-	const std::string get_states(uint8_t value);
-	size_t get_state_count() const;
-	bool get_writable() const;
-	SignalDecoder& get_decoder();
-	SignalEncoder& get_encoder();
-	bool get_received() const;
-	float get_last_value() const;
-
-	void set_prefix(std::string val);
-	void set_received(bool r);
-	void set_last_value(float val);
-};
\ No newline at end of file