Handle project new architecture using new CMakeFile

Change-Id: I672a9b49d9d5a3953ba6dccaafbbd738839f64a6
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

# Conflicts:
#	low-can-binding/libs/bitfield-c
#	low-can-binding/libs/isotp-c
#	low-can-binding/libs/openxc-message-format

1 files changed, 158 insertions, 0 deletions

diff --git a/low-can-binding/can/can-signals.hpp b/low-can-binding/can/can-signals.hpp
new file mode 100644
index 00000000..34ebeebd
--- /dev/null
+++ b/low-can-binding/can/can-signals.hpp
@@ -0,0 +1,158 @@
+///
+/// Copyright (C) 2015, 2016 "IoT.bzh"
+/// Author "Romain Forlot" <romain.forlot@iot.bzh>
+///
+/// Licensed under the Apache License, Version 2.0 (the "License");
+/// you may not use this file except in compliance with the License.
+/// You may obtain a copy of the License at
+///
+///	 http://www.apache.org/licenses/LICENSE-2.0
+///
+/// Unless required by applicable law or agreed to in writing, software
+/// distributed under the License is distributed on an "AS IS" BASIS,
+/// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+/// See the License for the specific language governing permissions and
+/// limitations under the License.
+///
+
+#pragma once
+
+#include <map>
+#include <mutex>
+#include <queue>
+#include <vector>
+#include <string>
+
+#include "openxc.pb.h"
+#include "../utils/timer.hpp"
+#include "can-bus.hpp"
+#include "can-message.hpp"
+#include "can-message-definition.hpp"
+#include "../diagnostic/diagnostic-message.hpp"
+
+extern "C"
+{
+	#include <afb/afb-binding.h>
+	#include <afb/afb-event-itf.h>
+}
+
+#define MESSAGE_SET_ID 0
+
+class can_signal_t;
+
+///
+/// @brief The type signature for a CAN signal decoder.
+///
+/// A SignalDecoder transforms a raw floating point CAN signal into a number,
+/// string or boolean.
+///
+/// @param[in] signal - The CAN signal that we are decoding.
+/// @param[in] signals - The list of all signals.
+/// @param[in] signalCount - The length of the signals array.
+/// @param[in] value - The CAN signal parsed from the message as a raw floating point
+///	value.
+/// @param[out] send - An output parameter. If the decoding failed or the CAN signal should
+///	not send for some other reason, this should be flipped to false.
+///
+/// @return a decoded value in an openxc_DynamicField struct.
+///
+typedef openxc_DynamicField (*SignalDecoder)(can_signal_t& signal,
+		const std::vector<can_signal_t>& signals, float value, bool* send);
+
+///
+/// @brief: The type signature for a CAN signal encoder.
+///
+/// A SignalEncoder transforms a number, string or boolean into a raw floating
+/// point value that fits in the CAN signal.
+///
+/// @param[in] signal - The CAN signal to encode. 
+/// @param[in] value - The dynamic field to encode.
+/// @param[out] send - An output parameter. If the encoding failed or the CAN signal should
+/// not be encoded for some other reason, this will be flipped to false.
+///
+typedef uint64_t (*SignalEncoder)(can_signal_t* signal,
+		openxc_DynamicField* value, bool* send);
+
+class can_signal_t
+{
+private:
+	std::uint8_t message_set_id_;
+	std::uint8_t message_id_;
+	std::string generic_name_; /*!< generic_name_ - The name of the signal to be output.*/
+	static std::string prefix_; /*!< prefix_ - generic_name_ will be prefixed with it. It has to reflect the used protocol.
+						  * which make easier to sort message when the come in.*/
+	uint8_t bit_position_; /*!< bitPosition_ - The starting bit of the signal in its CAN message (assuming
+										*	non-inverted bit numbering, i.e. the most significant bit of
+										*	each byte is 0) */
+	uint8_t bit_size_; /*!< bitSize_ - The width of the bit field in the CAN message. */
+	float factor_; /*!< factor_ - The final value will be multiplied by this factor. Use 1 if you
+							*	don't need a factor. */
+	float offset_; /*!< offset_ - The final value will be added to this offset. Use 0 if you
+							*	don't need an offset. */
+	float min_value_; /*!< min_value_ - The minimum value for the processed signal.*/
+	float max_value_; /*!< max_value_ - The maximum value for the processed signal. */
+	frequency_clock_t frequency_; /*!< frequency_ - A frequency_clock_t struct to control the maximum frequency to
+								*	process and send this signal. To process every value, set the
+								*	clock's frequency to 0. */
+	bool send_same_; /*!< send_same_ - If true, will re-send even if the value hasn't changed.*/
+	bool force_send_changed_; /*!< force_send_changed_ - If true, regardless of the frequency, it will send the
+							   * value if it has changed. */
+	std::map<uint8_t, std::string> states_; /*!< states_ - A map of CAN signal state describing the mapping
+										 * between numerical and string values for valid states. */
+	bool writable_; /*!< writable - True if the signal is allowed to be written from the USB host
+					 *	back to CAN. Defaults to false.*/
+	SignalDecoder decoder_; /*!< decoder_ - An optional function to decode a signal from the bus to a human
+							 * readable value. If NULL, the default numerical decoder is used. */
+	SignalEncoder encoder_; /*!< encoder_ - An optional function to encode a signal value to be written to
+							 * CAN into a byte array. If NULL, the default numerical encoder
+							 * is used. */
+	bool received_; /*!< received_ - True if this signal has ever been received.*/
+	float last_value_; /*!< lastValue_ - The last received value of the signal. If 'received' is false,
+						*	this value is undefined. */
+
+public:
+	can_signal_t(
+		std::uint8_t message_set_id,
+		std::uint8_t message_id,
+		std::string generic_name,
+		uint8_t bit_position,
+		uint8_t bit_size,
+		float factor,
+		float offset,
+		float min_value,
+		float max_value,
+		frequency_clock_t frequency,
+		bool send_same,
+		bool force_send_changed,
+		std::map<uint8_t, std::string> states,
+		bool writable,
+		SignalDecoder decoder,
+		SignalEncoder encoder,
+		bool received);
+
+	const can_message_definition_t& get_message() const;
+	const std::string& get_generic_name() const;
+	const std::string get_name() const;
+	const std::string& get_prefix() const;
+	uint8_t get_bit_position() const;
+	uint8_t get_bit_size() const;
+	float get_factor() const;
+	float get_offset() const;
+	float get_min_value() const;
+	float get_max_value() const;
+	frequency_clock_t& get_frequency();
+	bool get_send_same() const;
+	bool get_force_send_changed() const;
+	const std::map<uint8_t, std::string>& get_states() const;
+	const std::string get_states(uint8_t value);
+	size_t get_state_count() const;
+	bool get_writable() const;
+	SignalDecoder& get_decoder();
+	SignalEncoder& get_encoder();
+	bool get_received() const;
+	float get_last_value() const;
+
+	void set_prefix(std::string val);
+	void set_received(bool r);
+	void set_last_value(float val);
+};
\ No newline at end of file