Fix : wrong attribute type

Change-Id: I8a87c295d4d76a5551fbb67b04b9fee69644eb00
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

1 files changed, 20 insertions, 28 deletions

diff --git a/src/configuration.hpp b/src/configuration.hpp
index 4a41f24a..92655a6c 100644
--- a/src/configuration.hpp
+++ b/src/configuration.hpp
@@ -106,36 +106,28 @@ class configuration_t
 			active_message_set_ = id;
 		}
 
+		/// TODO: implement this function as method into can_bus class
+		/// @brief Pre initialize actions made before CAN bus initialization
+		/// @param[in] bus A CanBus struct defining the bus's metadata
+		/// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs.
+		/// @param[in] buses An array of all CAN buses.
+		/// @param[in] busCount The length of the buses array.
 		void pre_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount);
+		/// TODO: implement this function as method into can_bus class
+		/// @brief Post-initialize actions made after CAN bus initialization
+		/// @param[in] bus A CanBus struct defining the bus's metadata
+		/// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs.
+		/// @param[in] buses An array of all CAN buses.
+		/// @param[in] busCount The length of the buses array.
 		void post_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount);
+		/// TODO: implement this function as method into can_bus class
+		/// @brief Check if the device is connected to an active CAN bus, i.e. it's received a message in the recent past.
+		/// @return true if a message was received on the CAN bus within CAN_ACTIVE_TIMEOUT_S seconds.
 		void logBusStatistics(can_bus_dev_t* buses, const int busCount);
+		/// TODO: implement this function as method into can_bus class
+		/// @brief Log transfer statistics about all active CAN buses to the debug log.
+		/// @param[in] buses An array of active CAN buses.
+		/// @param[in] busCount The length of the buses array.
 		bool isBusActive(can_bus_dev_t* bus);
-};
-
-/// TODO: implement this function as method into can_bus class
-/// @brief Pre initialize actions made before CAN bus initialization
-/// @param[in] bus A CanBus struct defining the bus's metadata
-/// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs.
-/// @param[in] buses An array of all CAN buses.
-/// @param[in] busCount The length of the buses array.
-void pre_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount);
-
-/// TODO: implement this function as method into can_bus class
-/// @brief Post-initialize actions made after CAN bus initialization
-/// @param[in] bus A CanBus struct defining the bus's metadata
-/// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs.
-/// @param[in] buses An array of all CAN buses.
-/// @param[in] busCount The length of the buses array.
-void post_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount);
-
-/// TODO: implement this function as method into can_bus class
-/// @brief Check if the device is connected to an active CAN bus, i.e. it's received a message in the recent past.
-/// @return true if a message was received on the CAN bus within CAN_ACTIVE_TIMEOUT_S seconds.
-bool isBusActive(can_bus_dev_t* bus);
-
-/// TODO: implement this function as method into can_bus class
-/// @brief Log transfer statistics about all active CAN buses to the debug log.
-/// @param[in] buses An array of active CAN buses.
-/// @param[in] busCount The length of the buses array.
-void logBusStatistics(can_bus_dev_t* buses, const int busCount);
 
+};