Rename header file to hpp.

Change-Id: I399e0c0f39b18e63e254825b6322faf77896a264
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

1 files changed, 0 insertions, 173 deletions

diff --git a/src/obd2.h b/src/obd2.h
deleted file mode 100644
index cd362c79..00000000
--- a/src/obd2.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Copyright (C) 2015, 2016 "IoT.bzh"
- * Author "Romain Forlot" <romain.forlot@iot.bzh>
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *	 http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/*
- *	A representation of an OBD-II PID.
- *
- * pid - The 1 byte PID.
- * name - A human readable name to use for this PID when published.
- * frequency - The frequency to request this PID if supported by the vehicle
- *		when automatic, recurring OBD-II requests are enabled.
- */
-
-enum UNIT {
-	POURCENT,
-	DEGREES_CELSIUS,
-	KPA,
-	RPM,
-	GRAMS_SEC,
-	SECONDS,
-	KM,
-	KM_H,
-	PA,
-	NM
-};
-
-const char *UNIT_NAMES[10] = {
-	"POURCENT",
-	"DEGREES_CELSIUS",
-	"KPA",
-	"RPM",
-	"GRAMS_SEC",
-	"SECONDS",
-	"KM",
-	"KM_H",
-	"PA",
-	"NM"
-};
-
-/*
- *	A representation of an OBD-II PID.
- *
- * pid - The 1 byte PID.
- * name - A human readable name to use for this PID when published.
- * min - minimum value for this pid
- * max - maximum value for this pid
- * unit - unit used
- * frequency - The frequency to request this PID if supported by the vehicle
- *		when automatic, recurring OBD-II requests are enabled.
- *	supported - is it supported by the vehicle. Initialized after scan
- * event - application framework event handler.
- */
-typedef struct _Obd2Pid {
-	uint8_t pid;
-	const char* name;
-	const int min;
-	const int max;
-	enum UNIT unit;
-	int frequency;
-	bool supported;
-	struct afb_event event;
-} Obd2Pid;
-
-/*
-	{ pid: 0x4, name: "engine.load", frequency: 5 },
-	{ pid: 0x5, name: "engine.coolant.temperature", frequency: 1 },
-	{ pid: 0xa, name: "fuel.pressure", frequency: 1 },
-	{ pid: 0xb, name: "intake.manifold.pressure", frequency: 1 },
-	{ pid: 0xc, name: "engine.speed", frequency: 5 },
-	{ pid: 0xd, name: "vehicle.speed", frequency: 5 },
-	{ pid: 0xf, name: "intake.air.temperature", frequency: 1 },
-	{ pid: 0x10, name: "mass.airflow", frequency: 5 },
-	{ pid: 0x11, name: "throttle.position", frequency: 5 },
-	{ pid: 0x1f, name: "running.time", frequency: 1 },
-	{ pid: 0x27, name: "fuel.level", frequency: 1 },
-	{ pid: 0x33, name: "barometric.pressure", frequency: 1 },
-	{ pid: 0x4c, name: "commanded.throttle.position", frequency: 1 },
-	{ pid: 0x52, name: "ethanol.fuel.percentage", frequency: 1 },
-	{ pid: 0x5a, name: "accelerator.pedal.position", frequency: 5 },
-	{ pid: 0x5c, name: "engine.oil.temperature", frequency: 1 },
-	{ pid: 0x63, name: "engine.torque", frequency: 1 },
-};
- */
-
-/* Public: Check if a request is an OBD-II PID request.
- *
- * Returns true if the request is a mode 1	request and it has a 1 byte PID.
- */
-bool isObd2Request(DiagnosticRequest* request);
-
-/* Public: Decode the payload of an OBD-II PID.
- *
- * This function matches the type signature for a DiagnosticResponseDecoder, so
- * it can be used as the decoder for a DiagnosticRequest. It returns the decoded
- * value of the PID, using the standard formulas (see
- * http://en.wikipedia.org/wiki/OBD-II_PIDs#Mode_01).
- */
-float handleObd2Pid(const DiagnosticResponse* response, float parsedPayload);
-
-/*
- * Object to handle obd2 session with pre-scan of supported pid
- * then request them regularly
- */
-class obd2_handler_c {
-	private:
-
-		public:
-		/*
-		* Pre-defined OBD-II PIDs to query for if supported by the vehicle.
-		*/
-		const Obd2Pid OBD2_PIDS[] = {
-			{ pid: 0x04, name: "obd2.engine.load", min:0, max: 100, unit: POURCENT, frequency: 5, supported: false },
-			{ pid: 0x05, name: "obd2.engine.coolant.temperature", min: -40, max: 215, unit: DEGREES_CELSIUS, frequency: 1, supported: false },
-			{ pid: 0x0a, name: "obd2.fuel.pressure", min: 0, max: 765, unit: KPA, frequency: 1, supported: false },
-			{ pid: 0x0b, name: "obd2.intake.manifold.pressure", min: 0, max: 255, unit: KPA, frequency: 1, supported: false },
-			{ pid: 0x0c, name: "obd2.engine.speed", min: 0, max: 16383, unit: RPM, frequency: 5, supported: false },
-			{ pid: 0x0d, name: "obd2.vehicle.speed", min: 0, max: 255, unit: KM_H, frequency: 5, supported: false },
-			{ pid: 0x0f, name: "obd2.intake.air.temperature", min: -40, max:215, unit: DEGREES_CELSIUS, frequency: 1, supported: false },
-			{ pid: 0x10, name: "obd2.mass.airflow", min: 0, max: 655, unit: GRAMS_SEC, frequency: 5, supported: false },
-			{ pid: 0x11, name: "obd2.throttle.position", min: 0, max: 100, unit: POURCENT, frequency: 5, supported: false },
-			{ pid: 0x1f, name: "obd2.running.time", min: 0, max: 65535, unit: SECONDS, frequency: 1, supported: false },
-			{ pid: 0x2d, name: "obd2.EGR.error", min: -100, max: 99, unit: POURCENT, frequency: 0, supported: false },
-			{ pid: 0x2f, name: "obd2.fuel.level", min: 0, max: 100, unit: POURCENT, frequency: 1, supported: false },
-			{ pid: 0x33, name: "obd2.barometric.pressure", min: 0, max: 255, unit: KPA, frequency: 1, supported: false },
-			{ pid: 0x4c, name: "obd2.commanded.throttle.position", min: 0, max: 100, unit: POURCENT, frequency: 1, supported: false },
-			{ pid: 0x52, name: "obd2.ethanol.fuel.percentage", min: 0, max: 100, unit: POURCENT, frequency: 1, supported: false },
-			{ pid: 0x5a, name: "obd2.accelerator.pedal.position", min: 0, max: 100, unit: POURCENT, frequency: 5, supported: false },
-			{ pid: 0x5b, name: "obd2.hybrid.battery-pack.remaining.life", min: 0, max: 100, unit: POURCENT, frequency: 5, supported: false },
-			{ pid: 0x5c, name: "obd2.engine.oil.temperature",min: -40, max: 210, unit: DEGREES_CELSIUS, frequency: 1, supported: false },
-			{ pid: 0x63, name: "obd2.engine.torque", min: 0, max: 65535, unit: NM, frequency: 1, supported: false },
-		};
-
-			
-			/* Public: Check if a request is an OBD-II PID request.
- 			 *
- 			 * Returns true if the request is a mode 1  request and it has a 1 byte PID.
- 			 */
-			void find_obd2_pid(const char *name, std::Vector<Obd2Pid> *pids);
-
-			/* Public: Check if a request is an OBD-II PID request.
- 			 *
- 			 * Returns true if the request is a mode 1  request and it has a 1 byte PID.
- 			 */
-			bool is_obd2_request(DiagnosticRequest *request);
-
-			/*
-			 * Public: Check if requested signal name is an obd2 pid
-			 * 
-			 * Returns true if name began with ob2.* else false.
-			 */
-			bool is_obd2_signal(const char *name);
-
-			/*
-			 * Public: pass response to UDS-C library function 
-			 * diagnostic_decode_obd2_pid()
-			 *
-			 * Return: float number representing the requested value.
-			 */
-			bool decode_obd2_response(DiagnosticResponse* responce);
-}
\ No newline at end of file