diff options
Diffstat (limited to 'CAN-binder/low-can-binding/can/can-decoder.cpp')
| -rw-r--r-- | CAN-binder/low-can-binding/can/can-decoder.cpp | 244 |
1 files changed, 0 insertions, 244 deletions
diff --git a/CAN-binder/low-can-binding/can/can-decoder.cpp b/CAN-binder/low-can-binding/can/can-decoder.cpp deleted file mode 100644 index 61bfe753..00000000 --- a/CAN-binder/low-can-binding/can/can-decoder.cpp +++ /dev/null @@ -1,244 +0,0 @@ -/* - * Copyright (C) 2015, 2016 "IoT.bzh" - * Author "Romain Forlot" <romain.forlot@iot.bzh> - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#include "can-decoder.hpp" - -#include "canutil/read.h" -#include "../utils/openxc-utils.hpp" -#include "can-message-definition.hpp" -#include "../binding/low-can-hat.hpp" - -/// @brief Parse the signal's bitfield from the given data and return the raw -/// value. -/// -/// @param[in] signal - The signal to parse from the data. -/// @param[in] message - can_message_t to parse -/// -/// @return Returns the raw value of the signal parsed as a bitfield from the given byte -/// array. -/// -float decoder_t::parseSignalBitfield(can_signal_t& signal, const can_message_t& message) -{ - return bitfield_parse_float(message.get_data(), CAN_MESSAGE_SIZE, - signal.get_bit_position(), signal.get_bit_size(), signal.get_factor(), - signal.get_offset()); -} - -/// @brief Wrap a raw CAN signal value in a DynamicField without modification. -/// -/// This is an implementation of the SignalDecoder type signature, and can be -/// used directly in the can_signal_t.decoder field. -/// -/// @param[in] signal - The details of the signal that contains the state mapping. -/// @param[in] signals - The list of all signals -/// @param[in] value - The numerical value that will be wrapped in a DynamicField. -/// @param[out] send - An output argument that will be set to false if the value should -/// not be sent for any reason. -/// -/// @return Returns a DynamicField with the original, unmodified raw CAN signal value as -/// its numeric value. The 'send' argument will not be modified as this decoder -/// always succeeds. -/// -openxc_DynamicField decoder_t::noopDecoder(can_signal_t& signal, - const std::vector<std::shared_ptr<can_signal_t> >& signals, float value, bool* send) -{ - openxc_DynamicField decoded_value = build_DynamicField(value); - - return decoded_value; -} -/// @brief Coerces a numerical value to a boolean. -/// -/// This is an implementation of the SignalDecoder type signature, and can be -/// used directly in the can_signal_t.decoder field. -/// -/// @param[in] signal - The details of the signal that contains the state mapping. -/// @param[in] signals - The list of all signals -/// @param[in] value - The numerical value that will be converted to a boolean. -/// @param[out] send - An output argument that will be set to false if the value should -/// not be sent for any reason. -/// -/// @return Returns a DynamicField with a boolean value of false if the raw signal value -/// is 0.0, otherwise true. The 'send' argument will not be modified as this -/// decoder always succeeds. -/// -openxc_DynamicField decoder_t::booleanDecoder(can_signal_t& signal, - const std::vector<std::shared_ptr<can_signal_t> >& signals, float value, bool* send) -{ - openxc_DynamicField decoded_value = build_DynamicField(value == 0.0 ? false : true); - - return decoded_value; -} -/// @brief Update the metadata for a signal and the newly received value. -/// -/// This is an implementation of the SignalDecoder type signature, and can be -/// used directly in the can_signal_t.decoder field. -/// -/// This function always flips 'send' to false. -/// -/// @param[in] signal - The details of the signal that contains the state mapping. -/// @param[in] signals - The list of all signals. -/// @param[in] value - The numerical value that will be converted to a boolean. -/// @param[out] send - This output argument will always be set to false, so the caller will -/// know not to publish this value to the pipeline. -/// -/// @return Return value is undefined. -/// -openxc_DynamicField decoder_t::ignoreDecoder(can_signal_t& signal, - const std::vector<std::shared_ptr<can_signal_t> >& signals, float value, bool* send) -{ - if(send) - *send = false; - - openxc_DynamicField decoded_value; - - return decoded_value; -} - -/// @brief Find and return the corresponding string state for a CAN signal's -/// raw integer value. -/// -/// This is an implementation of the SignalDecoder type signature, and can be -/// used directly in the can_signal_t.decoder field. -/// -/// @param[in] signal - The details of the signal that contains the state mapping. -/// @param[in] signals - The list of all signals. -/// @param[in] value - The numerical value that should map to a state. -/// @param[out] send - An output argument that will be set to false if the value should -/// not be sent for any reason. -/// -/// @return Returns a DynamicField with a string value if a matching state is found in -/// the signal. If an equivalent isn't found, send is sent to false and the -/// return value is undefined. -/// -openxc_DynamicField decoder_t::stateDecoder(can_signal_t& signal, - const std::vector<std::shared_ptr<can_signal_t> >& signals, float value, bool* send) -{ - const std::string signal_state = signal.get_states((uint8_t)value); - openxc_DynamicField decoded_value = build_DynamicField(signal_state); - if(signal_state.size() <= 0) - { - *send = false; - ERROR("No state found with index: %d", (int)value); - } - return decoded_value; -} - - -/// @brief Parse a signal from a CAN message, apply any required transforations -/// to get a human readable value and public the result to the pipeline. -/// -/// If the can_signal_t has a non-NULL 'decoder' field, the raw CAN signal value -/// will be passed to the decoder before publishing. -/// -/// @param[in] signal - The details of the signal to decode and forward. -/// @param[in] message - The received CAN message that should contain this signal. -/// @param[in] signals - an array of all active signals. -/// @param[out] send - An output parameter that will be flipped to false if the value could -/// not be decoded. -/// -/// The decoder returns an openxc_DynamicField, which may contain a number, -/// string or boolean. -/// -openxc_DynamicField decoder_t::translateSignal(can_signal_t& signal, const can_message_t& message, - const std::vector<std::shared_ptr<can_signal_t> >& signals, bool* send) -{ - float value = decoder_t::parseSignalBitfield(signal, message); - DEBUG("Decoded message from parseSignalBitfield: %f", value); - - // Must call the decoders every time, regardless of if we are going to - // decide to send the signal or not. - openxc_DynamicField decoded_value = decoder_t::decodeSignal(signal, - value, signals, send); - - signal.set_received(true); - - // Don't send if they is no changes - if ((signal.get_last_value() == value && !signal.get_send_same()) || !*send ) - { - *send = false; - } - signal.set_last_value(value); - signal.set_timestamp(message.get_timestamp()); - signal.get_message()->set_last_value(message); - return decoded_value; -} - -/// @brief Parse a signal from a CAN message and apply any required -/// transforations to get a human readable value. -/// -/// If the can_signal_t has a non-NULL 'decoder' field, the raw CAN signal value -/// will be passed to the decoder before returning. -/// -/// @param[in] signal - The details of the signal to decode and forward. -/// @param[in] value - The numerical value that will be converted to a boolean. -/// @param[in] signals - an array of all active signals. -/// @param[out] send - An output parameter that will be flipped to false if the value could -/// not be decoded. -/// -/// @return The decoder returns an openxc_DynamicField, which may contain a number, -/// string or boolean. If 'send' is false, the return value is undefined. -/// -openxc_DynamicField decoder_t::decodeSignal( can_signal_t& signal, - float value, const std::vector<std::shared_ptr<can_signal_t> >& signals, bool* send) -{ - SignalDecoder decoder = signal.get_decoder() == nullptr ? - noopDecoder : signal.get_decoder(); - openxc_DynamicField decoded_value = decoder(signal, signals, - value, send); - return decoded_value; -} - -/// @brief Decode a transformed, human readable value from an raw CAN signal -/// already parsed from a CAN message. -/// -/// This is the same as decodeSignal but you must parse the bitfield value of the signal from the CAN -/// message yourself. This is useful if you need that raw value for something -/// else. -/// -/// @param[in] signal - The details of the signal to decode and forward. -/// @param[in] message - Raw CAN message to decode -/// @param[in] signals - an array of all active signals. -/// @param[out] send - An output parameter that will be flipped to false if the value could -/// not be decoded. -/// -openxc_DynamicField decoder_t::decodeSignal( can_signal_t& signal, - const can_message_t& message, const std::vector<std::shared_ptr<can_signal_t> >& signals, bool* send) -{ - float value = parseSignalBitfield(signal, message); - return decodeSignal(signal, value, signals, send); -} - - -/// -/// @brief Decode the payload of an OBD-II PID. -/// -/// This function matches the type signature for a DiagnosticResponseDecoder, so -/// it can be used as the decoder for a DiagnosticRequest. It returns the decoded -/// value of the PID, using the standard formulas (see -/// http://en.wikipedia.org/wiki/OBD-II_PIDs#Mode_01). -/// -/// @param[in] response - the received DiagnosticResponse (the data is in response.payload, -/// a byte array). This is most often used when the byte order is -/// signiticant, i.e. with many OBD-II PID formulas. -/// @param[in] parsed_payload - the entire payload of the response parsed as an int. -/// -/// @return Float decoded value. -/// -float decoder_t::decode_obd2_response(const DiagnosticResponse* response, float parsed_payload) -{ - return diagnostic_decode_obd2_pid(response); -}
\ No newline at end of file |