diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/3-Installation-J1939.md | 103 | ||||
| -rw-r--r-- | docs/4-Usage.md (renamed from docs/3-Usage.md) | 17 | ||||
| -rw-r--r-- | docs/api-services-book.yml | 6 |
3 files changed, 124 insertions, 2 deletions
diff --git a/docs/3-Installation-J1939.md b/docs/3-Installation-J1939.md new file mode 100644 index 00000000..8ab15f33 --- /dev/null +++ b/docs/3-Installation-J1939.md @@ -0,0 +1,103 @@ +# Installation j1939 for AGL + +#### Minimum kernel version : 4.19 + +## Compilation of kernel j1939 + +##### Clone linux-can-next repository on kernel.org + +```bash +git clone https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git/ +``` + +##### Checkout on j1939 branch + +```bash +git checkout j1939 +``` + +##### Add the compilation of the j1939 + +```bash +make menuconfig + - Networking Support + - Can bus subsystem support + - <M> SAE J1939 + - [*] debug SAE J1939 +``` + +##### Compile + +```bash +make +``` + +##### Install + +```bash +make modules_install +make install +``` + +##### Update grub + +###### CentOS/RHEL/Oracle/Scientific and Fedora Linux + +```bash +grub2-mkconfig -o /boot/grub2/grub.cfg +grubby --set-default /boot/vmlinuz-... +reboot +``` + +###### Debian/Ubuntu Linux + +```bash +update-grub +reboot +``` + +##### Check if the installation is correct + +```bash +modprobe can-j1939 +``` + +If no errors are generated you have successfully install a kernel with j1939 module. + +You can have a problem with header file, to check that go in the file /usr/include/linux/can.h + +```bash +vi /usr/include/linux/can.h +``` + +If in the struct sockaddr_can you don't see j1939, the header are not upgrade. + +So you need to do this manually, go to you're linux-can-next repository and do the following command: + +```bash +cp include/uapi/linux/can.h /usr/include/linux/can.h +cp include/uapi/linux/can/j1939.h /usr/include/linux/can/ +``` + + + +### Activate J1939 CMAKE + +To activate J1939 at the compilation. + +Edit the file conf.d/cmake/cmake/config.cmake + +And change the line : + +```cmake +option(WITH_FEATURE_J1939 "Activate J1939" OFF) +``` + +With : + +```cmake +option(WITH_FEATURE_J1939 "Activate J1939" ON) +``` + + + diff --git a/docs/3-Usage.md b/docs/4-Usage.md index daeca878..61ca0689 100644 --- a/docs/3-Usage.md +++ b/docs/4-Usage.md @@ -127,6 +127,15 @@ ls="can1" hs="can1" ``` +* You can use this configuration for j1939: + +```ini +[CANbus-mapping] +hs="can0" +ls="can1" +j1939="can2" +``` + > **CAUTION VERY IMPORTANT:** Make sure the CAN bus\(es\) you specify in your > configuration file match those specified in your generated source file with > the `CAN-config-generator`. @@ -243,6 +252,14 @@ low-can subscribe { "event" : "diagnostic*speed*" } --> will subscribe to all di low-can subscribe { "event" : "diagnostic*speed" } --> will subscribe to all diagnostic messages ending with speed in their name. Search will be on prefixed messages here. ``` +You can also subscribe to an event with the ID or the PGN of the message definition : + + +```json +low-can subscribe { "id" : 1568} +low-can subscribe { "pgn" : 61442} +``` + You can stop receiving event from it by unsubscribe the signal the same way you did for subscribe ```json diff --git a/docs/api-services-book.yml b/docs/api-services-book.yml index c72b92e6..11588856 100644 --- a/docs/api-services-book.yml +++ b/docs/api-services-book.yml @@ -12,5 +12,7 @@ books: name: Architecture presentation - url: 2-Installation.md name: Installation Guide - - url: 3-Usage.md - name: Usage Guide
\ No newline at end of file + - url: 3-Installation-J1939 + name: Installation Guide for J1939 + - url: 4-Usage.md + name: Usage Guide |