diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/2-Installation.md | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/docs/2-Installation.md b/docs/2-Installation.md index d4071a43..410bc4b6 100644 --- a/docs/2-Installation.md +++ b/docs/2-Installation.md @@ -6,7 +6,7 @@ It will produce a _configuration-generated.cpp_ file to paste in the source, _src/_, directory. -* Make sure you already set up the AGL SDK using the following [guide](http://docs.iot.bzh/docs/getting_started/en/dev/reference/setup-sdk-environment.html). +* Make sure you already set up the AGL SDK using the following [SDK Quick Setup Guide](http://docs.iot.bzh/docs/getting_started/en/dev/reference/setup-sdk-environment.html). Alternatively, please refer to official guides available on [AGL Developer Site](http://docs.automotivelinux.org/docs/devguides/en/dev/#guides). To get the correct SDK version installed, you **must** prepare your environment with the **chinook-next** version. To do so, run the following command in your docker image in the step 4 in place of `... [ prepare build environment ] ...`: @@ -19,6 +19,8 @@ $ /xdt/build/agl-init-build-env * An [USB CAN adapter](http://shop.8devices.com/usb2can) connected to connector through the [right cable](http://www.mouser.fr/ProductDetail/EasySync/OBD-M-DB9-F-ES/)). +<!-- pagebreak --> + # Getting started ## Use of CAN config generator @@ -198,7 +200,7 @@ It's because installation remove the binding before installing it. If it is the first time that you make the installation then you'll have this message in place of _**true**_. -### Installation manually +### Manual Installation To install it manually, you need to copy the _low-can-binding.wgt_ file on your target, then from it execute the following commands : |