diff options
Diffstat (limited to 'generator/proto/google/protobuf/descriptor.proto')
| -rw-r--r-- | generator/proto/google/protobuf/descriptor.proto | 620 |
1 files changed, 620 insertions, 0 deletions
diff --git a/generator/proto/google/protobuf/descriptor.proto b/generator/proto/google/protobuf/descriptor.proto new file mode 100644 index 00000000..a785f79f --- /dev/null +++ b/generator/proto/google/protobuf/descriptor.proto @@ -0,0 +1,620 @@ +// Protocol Buffers - Google's data interchange format +// Copyright 2008 Google Inc. All rights reserved. +// http://code.google.com/p/protobuf/ +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following disclaimer +// in the documentation and/or other materials provided with the +// distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +// Author: kenton@google.com (Kenton Varda) +// Based on original Protocol Buffers design by +// Sanjay Ghemawat, Jeff Dean, and others. +// +// The messages in this file describe the definitions found in .proto files. +// A valid .proto file can be translated directly to a FileDescriptorProto +// without any other information (e.g. without reading its imports). + + + +package google.protobuf; +option java_package = "com.google.protobuf"; +option java_outer_classname = "DescriptorProtos"; + +// descriptor.proto must be optimized for speed because reflection-based +// algorithms don't work during bootstrapping. +option optimize_for = SPEED; + +// The protocol compiler can output a FileDescriptorSet containing the .proto +// files it parses. +message FileDescriptorSet { + repeated FileDescriptorProto file = 1; +} + +// Describes a complete .proto file. +message FileDescriptorProto { + optional string name = 1; // file name, relative to root of source tree + optional string package = 2; // e.g. "foo", "foo.bar", etc. + + // Names of files imported by this file. + repeated string dependency = 3; + // Indexes of the public imported files in the dependency list above. + repeated int32 public_dependency = 10; + // Indexes of the weak imported files in the dependency list. + // For Google-internal migration only. Do not use. + repeated int32 weak_dependency = 11; + + // All top-level definitions in this file. + repeated DescriptorProto message_type = 4; + repeated EnumDescriptorProto enum_type = 5; + repeated ServiceDescriptorProto service = 6; + repeated FieldDescriptorProto extension = 7; + + optional FileOptions options = 8; + + // This field contains optional information about the original source code. + // You may safely remove this entire field whithout harming runtime + // functionality of the descriptors -- the information is needed only by + // development tools. + optional SourceCodeInfo source_code_info = 9; +} + +// Describes a message type. +message DescriptorProto { + optional string name = 1; + + repeated FieldDescriptorProto field = 2; + repeated FieldDescriptorProto extension = 6; + + repeated DescriptorProto nested_type = 3; + repeated EnumDescriptorProto enum_type = 4; + + message ExtensionRange { + optional int32 start = 1; + optional int32 end = 2; + } + repeated ExtensionRange extension_range = 5; + + optional MessageOptions options = 7; +} + +// Describes a field within a message. +message FieldDescriptorProto { + enum Type { + // 0 is reserved for errors. + // Order is weird for historical reasons. + TYPE_DOUBLE = 1; + TYPE_FLOAT = 2; + // Not ZigZag encoded. Negative numbers take 10 bytes. Use TYPE_SINT64 if + // negative values are likely. + TYPE_INT64 = 3; + TYPE_UINT64 = 4; + // Not ZigZag encoded. Negative numbers take 10 bytes. Use TYPE_SINT32 if + // negative values are likely. + TYPE_INT32 = 5; + TYPE_FIXED64 = 6; + TYPE_FIXED32 = 7; + TYPE_BOOL = 8; + TYPE_STRING = 9; + TYPE_GROUP = 10; // Tag-delimited aggregate. + TYPE_MESSAGE = 11; // Length-delimited aggregate. + + // New in version 2. + TYPE_BYTES = 12; + TYPE_UINT32 = 13; + TYPE_ENUM = 14; + TYPE_SFIXED32 = 15; + TYPE_SFIXED64 = 16; + TYPE_SINT32 = 17; // Uses ZigZag encoding. + TYPE_SINT64 = 18; // Uses ZigZag encoding. + }; + + enum Label { + // 0 is reserved for errors + LABEL_OPTIONAL = 1; + LABEL_REQUIRED = 2; + LABEL_REPEATED = 3; + // TODO(sanjay): Should we add LABEL_MAP? + }; + + optional string name = 1; + optional int32 number = 3; + optional Label label = 4; + + // If type_name is set, this need not be set. If both this and type_name + // are set, this must be either TYPE_ENUM or TYPE_MESSAGE. + optional Type type = 5; + + // For message and enum types, this is the name of the type. If the name + // starts with a '.', it is fully-qualified. Otherwise, C++-like scoping + // rules are used to find the type (i.e. first the nested types within this + // message are searched, then within the parent, on up to the root + // namespace). + optional string type_name = 6; + + // For extensions, this is the name of the type being extended. It is + // resolved in the same manner as type_name. + optional string extendee = 2; + + // For numeric types, contains the original text representation of the value. + // For booleans, "true" or "false". + // For strings, contains the default text contents (not escaped in any way). + // For bytes, contains the C escaped value. All bytes >= 128 are escaped. + // TODO(kenton): Base-64 encode? + optional string default_value = 7; + + optional FieldOptions options = 8; +} + +// Describes an enum type. +message EnumDescriptorProto { + optional string name = 1; + + repeated EnumValueDescriptorProto value = 2; + + optional EnumOptions options = 3; +} + +// Describes a value within an enum. +message EnumValueDescriptorProto { + optional string name = 1; + optional int32 number = 2; + + optional EnumValueOptions options = 3; +} + +// Describes a service. +message ServiceDescriptorProto { + optional string name = 1; + repeated MethodDescriptorProto method = 2; + + optional ServiceOptions options = 3; +} + +// Describes a method of a service. +message MethodDescriptorProto { + optional string name = 1; + + // Input and output type names. These are resolved in the same way as + // FieldDescriptorProto.type_name, but must refer to a message type. + optional string input_type = 2; + optional string output_type = 3; + + optional MethodOptions options = 4; +} + + +// =================================================================== +// Options + +// Each of the definitions above may have "options" attached. These are +// just annotations which may cause code to be generated slightly differently +// or may contain hints for code that manipulates protocol messages. +// +// Clients may define custom options as extensions of the *Options messages. +// These extensions may not yet be known at parsing time, so the parser cannot +// store the values in them. Instead it stores them in a field in the *Options +// message called uninterpreted_option. This field must have the same name +// across all *Options messages. We then use this field to populate the +// extensions when we build a descriptor, at which point all protos have been +// parsed and so all extensions are known. +// +// Extension numbers for custom options may be chosen as follows: +// * For options which will only be used within a single application or +// organization, or for experimental options, use field numbers 50000 +// through 99999. It is up to you to ensure that you do not use the +// same number for multiple options. +// * For options which will be published and used publicly by multiple +// independent entities, e-mail protobuf-global-extension-registry@google.com +// to reserve extension numbers. Simply provide your project name (e.g. +// Object-C plugin) and your porject website (if available) -- there's no need +// to explain how you intend to use them. Usually you only need one extension +// number. You can declare multiple options with only one extension number by +// putting them in a sub-message. See the Custom Options section of the docs +// for examples: +// http://code.google.com/apis/protocolbuffers/docs/proto.html#options +// If this turns out to be popular, a web service will be set up +// to automatically assign option numbers. + + +message FileOptions { + + // Sets the Java package where classes generated from this .proto will be + // placed. By default, the proto package is used, but this is often + // inappropriate because proto packages do not normally start with backwards + // domain names. + optional string java_package = 1; + + + // If set, all the classes from the .proto file are wrapped in a single + // outer class with the given name. This applies to both Proto1 + // (equivalent to the old "--one_java_file" option) and Proto2 (where + // a .proto always translates to a single class, but you may want to + // explicitly choose the class name). + optional string java_outer_classname = 8; + + // If set true, then the Java code generator will generate a separate .java + // file for each top-level message, enum, and service defined in the .proto + // file. Thus, these types will *not* be nested inside the outer class + // named by java_outer_classname. However, the outer class will still be + // generated to contain the file's getDescriptor() method as well as any + // top-level extensions defined in the file. + optional bool java_multiple_files = 10 [default=false]; + + // If set true, then the Java code generator will generate equals() and + // hashCode() methods for all messages defined in the .proto file. This is + // purely a speed optimization, as the AbstractMessage base class includes + // reflection-based implementations of these methods. + optional bool java_generate_equals_and_hash = 20 [default=false]; + + // Generated classes can be optimized for speed or code size. + enum OptimizeMode { + SPEED = 1; // Generate complete code for parsing, serialization, + // etc. + CODE_SIZE = 2; // Use ReflectionOps to implement these methods. + LITE_RUNTIME = 3; // Generate code using MessageLite and the lite runtime. + } + optional OptimizeMode optimize_for = 9 [default=SPEED]; + + // Sets the Go package where structs generated from this .proto will be + // placed. There is no default. + optional string go_package = 11; + + + + // Should generic services be generated in each language? "Generic" services + // are not specific to any particular RPC system. They are generated by the + // main code generators in each language (without additional plugins). + // Generic services were the only kind of service generation supported by + // early versions of proto2. + // + // Generic services are now considered deprecated in favor of using plugins + // that generate code specific to your particular RPC system. Therefore, + // these default to false. Old code which depends on generic services should + // explicitly set them to true. + optional bool cc_generic_services = 16 [default=false]; + optional bool java_generic_services = 17 [default=false]; + optional bool py_generic_services = 18 [default=false]; + + // The parser stores options it doesn't recognize here. See above. + repeated UninterpretedOption uninterpreted_option = 999; + + // Clients can define custom options in extensions of this message. See above. + extensions 1000 to max; +} + +message MessageOptions { + // Set true to use the old proto1 MessageSet wire format for extensions. + // This is provided for backwards-compatibility with the MessageSet wire + // format. You should not use this for any other reason: It's less + // efficient, has fewer features, and is more complicated. + // + // The message must be defined exactly as follows: + // message Foo { + // option message_set_wire_format = true; + // extensions 4 to max; + // } + // Note that the message cannot have any defined fields; MessageSets only + // have extensions. + // + // All extensions of your type must be singular messages; e.g. they cannot + // be int32s, enums, or repeated messages. + // + // Because this is an option, the above two restrictions are not enforced by + // the protocol compiler. + optional bool message_set_wire_format = 1 [default=false]; + + // Disables the generation of the standard "descriptor()" accessor, which can + // conflict with a field of the same name. This is meant to make migration + // from proto1 easier; new code should avoid fields named "descriptor". + optional bool no_standard_descriptor_accessor = 2 [default=false]; + + // The parser stores options it doesn't recognize here. See above. + repeated UninterpretedOption uninterpreted_option = 999; + + // Clients can define custom options in extensions of this message. See above. + extensions 1000 to max; +} + +message FieldOptions { + // The ctype option instructs the C++ code generator to use a different + // representation of the field than it normally would. See the specific + // options below. This option is not yet implemented in the open source + // release -- sorry, we'll try to include it in a future version! + optional CType ctype = 1 [default = STRING]; + enum CType { + // Default mode. + STRING = 0; + + CORD = 1; + + STRING_PIECE = 2; + } + // The packed option can be enabled for repeated primitive fields to enable + // a more efficient representation on the wire. Rather than repeatedly + // writing the tag and type for each element, the entire array is encoded as + // a single length-delimited blob. + optional bool packed = 2; + + + + // Should this field be parsed lazily? Lazy applies only to message-type + // fields. It means that when the outer message is initially parsed, the + // inner message's contents will not be parsed but instead stored in encoded + // form. The inner message will actually be parsed when it is first accessed. + // + // This is only a hint. Implementations are free to choose whether to use + // eager or lazy parsing regardless of the value of this option. However, + // setting this option true suggests that the protocol author believes that + // using lazy parsing on this field is worth the additional bookkeeping + // overhead typically needed to implement it. + // + // This option does not affect the public interface of any generated code; + // all method signatures remain the same. Furthermore, thread-safety of the + // interface is not affected by this option; const methods remain safe to + // call from multiple threads concurrently, while non-const methods continue + // to require exclusive access. + // + // + // Note that implementations may choose not to check required fields within + // a lazy sub-message. That is, calling IsInitialized() on the outher message + // may return true even if the inner message has missing required fields. + // This is necessary because otherwise the inner message would have to be + // parsed in order to perform the check, defeating the purpose of lazy + // parsing. An implementation which chooses not to check required fields + // must be consistent about it. That is, for any particular sub-message, the + // implementation must either *always* check its required fields, or *never* + // check its required fields, regardless of whether or not the message has + // been parsed. + optional bool lazy = 5 [default=false]; + + // Is this field deprecated? + // Depending on the target platform, this can emit Deprecated annotations + // for accessors, or it will be completely ignored; in the very least, this + // is a formalization for deprecating fields. + optional bool deprecated = 3 [default=false]; + + // EXPERIMENTAL. DO NOT USE. + // For "map" fields, the name of the field in the enclosed type that + // is the key for this map. For example, suppose we have: + // message Item { + // required string name = 1; + // required string value = 2; + // } + // message Config { + // repeated Item items = 1 [experimental_map_key="name"]; + // } + // In this situation, the map key for Item will be set to "name". + // TODO: Fully-implement this, then remove the "experimental_" prefix. + optional string experimental_map_key = 9; + + // For Google-internal migration only. Do not use. + optional bool weak = 10 [default=false]; + + // The parser stores options it doesn't recognize here. See above. + repeated UninterpretedOption uninterpreted_option = 999; + + // Clients can define custom options in extensions of this message. See above. + extensions 1000 to max; +} + +message EnumOptions { + + // Set this option to false to disallow mapping different tag names to a same + // value. + optional bool allow_alias = 2 [default=true]; + + // The parser stores options it doesn't recognize here. See above. + repeated UninterpretedOption uninterpreted_option = 999; + + // Clients can define custom options in extensions of this message. See above. + extensions 1000 to max; +} + +message EnumValueOptions { + // The parser stores options it doesn't recognize here. See above. + repeated UninterpretedOption uninterpreted_option = 999; + + // Clients can define custom options in extensions of this message. See above. + extensions 1000 to max; +} + +message ServiceOptions { + + // Note: Field numbers 1 through 32 are reserved for Google's internal RPC + // framework. We apologize for hoarding these numbers to ourselves, but + // we were already using them long before we decided to release Protocol + // Buffers. + + // The parser stores options it doesn't recognize here. See above. + repeated UninterpretedOption uninterpreted_option = 999; + + // Clients can define custom options in extensions of this message. See above. + extensions 1000 to max; +} + +message MethodOptions { + + // Note: Field numbers 1 through 32 are reserved for Google's internal RPC + // framework. We apologize for hoarding these numbers to ourselves, but + // we were already using them long before we decided to release Protocol + // Buffers. + + // The parser stores options it doesn't recognize here. See above. + repeated UninterpretedOption uninterpreted_option = 999; + + // Clients can define custom options in extensions of this message. See above. + extensions 1000 to max; +} + + +// A message representing a option the parser does not recognize. This only +// appears in options protos created by the compiler::Parser class. +// DescriptorPool resolves these when building Descriptor objects. Therefore, +// options protos in descriptor objects (e.g. returned by Descriptor::options(), +// or produced by Descriptor::CopyTo()) will never have UninterpretedOptions +// in them. +message UninterpretedOption { + // The name of the uninterpreted option. Each string represents a segment in + // a dot-separated name. is_extension is true iff a segment represents an + // extension (denoted with parentheses in options specs in .proto files). + // E.g.,{ ["foo", false], ["bar.baz", true], ["qux", false] } represents + // "foo.(bar.baz).qux". + message NamePart { + required string name_part = 1; + required bool is_extension = 2; + } + repeated NamePart name = 2; + + // The value of the uninterpreted option, in whatever type the tokenizer + // identified it as during parsing. Exactly one of these should be set. + optional string identifier_value = 3; + optional uint64 positive_int_value = 4; + optional int64 negative_int_value = 5; + optional double double_value = 6; + optional bytes string_value = 7; + optional string aggregate_value = 8; +} + +// =================================================================== +// Optional source code info + +// Encapsulates information about the original source file from which a +// FileDescriptorProto was generated. +message SourceCodeInfo { + // A Location identifies a piece of source code in a .proto file which + // corresponds to a particular definition. This information is intended + // to be useful to IDEs, code indexers, documentation generators, and similar + // tools. + // + // For example, say we have a file like: + // message Foo { + // optional string foo = 1; + // } + // Let's look at just the field definition: + // optional string foo = 1; + // ^ ^^ ^^ ^ ^^^ + // a bc de f ghi + // We have the following locations: + // span path represents + // [a,i) [ 4, 0, 2, 0 ] The whole field definition. + // [a,b) [ 4, 0, 2, 0, 4 ] The label (optional). + // [c,d) [ 4, 0, 2, 0, 5 ] The type (string). + // [e,f) [ 4, 0, 2, 0, 1 ] The name (foo). + // [g,h) [ 4, 0, 2, 0, 3 ] The number (1). + // + // Notes: + // - A location may refer to a repeated field itself (i.e. not to any + // particular index within it). This is used whenever a set of elements are + // logically enclosed in a single code segment. For example, an entire + // extend block (possibly containing multiple extension definitions) will + // have an outer location whose path refers to the "extensions" repeated + // field without an index. + // - Multiple locations may have the same path. This happens when a single + // logical declaration is spread out across multiple places. The most + // obvious example is the "extend" block again -- there may be multiple + // extend blocks in the same scope, each of which will have the same path. + // - A location's span is not always a subset of its parent's span. For + // example, the "extendee" of an extension declaration appears at the + // beginning of the "extend" block and is shared by all extensions within + // the block. + // - Just because a location's span is a subset of some other location's span + // does not mean that it is a descendent. For example, a "group" defines + // both a type and a field in a single declaration. Thus, the locations + // corresponding to the type and field and their components will overlap. + // - Code which tries to interpret locations should probably be designed to + // ignore those that it doesn't understand, as more types of locations could + // be recorded in the future. + repeated Location location = 1; + message Location { + // Identifies which part of the FileDescriptorProto was defined at this + // location. + // + // Each element is a field number or an index. They form a path from + // the root FileDescriptorProto to the place where the definition. For + // example, this path: + // [ 4, 3, 2, 7, 1 ] + // refers to: + // file.message_type(3) // 4, 3 + // .field(7) // 2, 7 + // .name() // 1 + // This is because FileDescriptorProto.message_type has field number 4: + // repeated DescriptorProto message_type = 4; + // and DescriptorProto.field has field number 2: + // repeated FieldDescriptorProto field = 2; + // and FieldDescriptorProto.name has field number 1: + // optional string name = 1; + // + // Thus, the above path gives the location of a field name. If we removed + // the last element: + // [ 4, 3, 2, 7 ] + // this path refers to the whole field declaration (from the beginning + // of the label to the terminating semicolon). + repeated int32 path = 1 [packed=true]; + + // Always has exactly three or four elements: start line, start column, + // end line (optional, otherwise assumed same as start line), end column. + // These are packed into a single field for efficiency. Note that line + // and column numbers are zero-based -- typically you will want to add + // 1 to each before displaying to a user. + repeated int32 span = 2 [packed=true]; + + // If this SourceCodeInfo represents a complete declaration, these are any + // comments appearing before and after the declaration which appear to be + // attached to the declaration. + // + // A series of line comments appearing on consecutive lines, with no other + // tokens appearing on those lines, will be treated as a single comment. + // + // Only the comment content is provided; comment markers (e.g. //) are + // stripped out. For block comments, leading whitespace and an asterisk + // will be stripped from the beginning of each line other than the first. + // Newlines are included in the output. + // + // Examples: + // + // optional int32 foo = 1; // Comment attached to foo. + // // Comment attached to bar. + // optional int32 bar = 2; + // + // optional string baz = 3; + // // Comment attached to baz. + // // Another line attached to baz. + // + // // Comment attached to qux. + // // + // // Another line attached to qux. + // optional double qux = 4; + // + // optional string corge = 5; + // /* Block comment attached + // * to corge. Leading asterisks + // * will be removed. */ + // /* Block comment attached to + // * grault. */ + // optional int32 grault = 6; + optional string leading_comments = 3; + optional string trailing_comments = 4; + } +} |