diff options
Diffstat (limited to 'low-can-binding/can/can-signals.hpp')
| -rw-r--r-- | low-can-binding/can/can-signals.hpp | 158 |
1 files changed, 0 insertions, 158 deletions
diff --git a/low-can-binding/can/can-signals.hpp b/low-can-binding/can/can-signals.hpp deleted file mode 100644 index 34ebeebd..00000000 --- a/low-can-binding/can/can-signals.hpp +++ /dev/null @@ -1,158 +0,0 @@ -/// -/// Copyright (C) 2015, 2016 "IoT.bzh" -/// Author "Romain Forlot" <romain.forlot@iot.bzh> -/// -/// Licensed under the Apache License, Version 2.0 (the "License"); -/// you may not use this file except in compliance with the License. -/// You may obtain a copy of the License at -/// -/// http://www.apache.org/licenses/LICENSE-2.0 -/// -/// Unless required by applicable law or agreed to in writing, software -/// distributed under the License is distributed on an "AS IS" BASIS, -/// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -/// See the License for the specific language governing permissions and -/// limitations under the License. -/// - -#pragma once - -#include <map> -#include <mutex> -#include <queue> -#include <vector> -#include <string> - -#include "openxc.pb.h" -#include "../utils/timer.hpp" -#include "can-bus.hpp" -#include "can-message.hpp" -#include "can-message-definition.hpp" -#include "../diagnostic/diagnostic-message.hpp" - -extern "C" -{ - #include <afb/afb-binding.h> - #include <afb/afb-event-itf.h> -} - -#define MESSAGE_SET_ID 0 - -class can_signal_t; - -/// -/// @brief The type signature for a CAN signal decoder. -/// -/// A SignalDecoder transforms a raw floating point CAN signal into a number, -/// string or boolean. -/// -/// @param[in] signal - The CAN signal that we are decoding. -/// @param[in] signals - The list of all signals. -/// @param[in] signalCount - The length of the signals array. -/// @param[in] value - The CAN signal parsed from the message as a raw floating point -/// value. -/// @param[out] send - An output parameter. If the decoding failed or the CAN signal should -/// not send for some other reason, this should be flipped to false. -/// -/// @return a decoded value in an openxc_DynamicField struct. -/// -typedef openxc_DynamicField (*SignalDecoder)(can_signal_t& signal, - const std::vector<can_signal_t>& signals, float value, bool* send); - -/// -/// @brief: The type signature for a CAN signal encoder. -/// -/// A SignalEncoder transforms a number, string or boolean into a raw floating -/// point value that fits in the CAN signal. -/// -/// @param[in] signal - The CAN signal to encode. -/// @param[in] value - The dynamic field to encode. -/// @param[out] send - An output parameter. If the encoding failed or the CAN signal should -/// not be encoded for some other reason, this will be flipped to false. -/// -typedef uint64_t (*SignalEncoder)(can_signal_t* signal, - openxc_DynamicField* value, bool* send); - -class can_signal_t -{ -private: - std::uint8_t message_set_id_; - std::uint8_t message_id_; - std::string generic_name_; /*!< generic_name_ - The name of the signal to be output.*/ - static std::string prefix_; /*!< prefix_ - generic_name_ will be prefixed with it. It has to reflect the used protocol. - * which make easier to sort message when the come in.*/ - uint8_t bit_position_; /*!< bitPosition_ - The starting bit of the signal in its CAN message (assuming - * non-inverted bit numbering, i.e. the most significant bit of - * each byte is 0) */ - uint8_t bit_size_; /*!< bitSize_ - The width of the bit field in the CAN message. */ - float factor_; /*!< factor_ - The final value will be multiplied by this factor. Use 1 if you - * don't need a factor. */ - float offset_; /*!< offset_ - The final value will be added to this offset. Use 0 if you - * don't need an offset. */ - float min_value_; /*!< min_value_ - The minimum value for the processed signal.*/ - float max_value_; /*!< max_value_ - The maximum value for the processed signal. */ - frequency_clock_t frequency_; /*!< frequency_ - A frequency_clock_t struct to control the maximum frequency to - * process and send this signal. To process every value, set the - * clock's frequency to 0. */ - bool send_same_; /*!< send_same_ - If true, will re-send even if the value hasn't changed.*/ - bool force_send_changed_; /*!< force_send_changed_ - If true, regardless of the frequency, it will send the - * value if it has changed. */ - std::map<uint8_t, std::string> states_; /*!< states_ - A map of CAN signal state describing the mapping - * between numerical and string values for valid states. */ - bool writable_; /*!< writable - True if the signal is allowed to be written from the USB host - * back to CAN. Defaults to false.*/ - SignalDecoder decoder_; /*!< decoder_ - An optional function to decode a signal from the bus to a human - * readable value. If NULL, the default numerical decoder is used. */ - SignalEncoder encoder_; /*!< encoder_ - An optional function to encode a signal value to be written to - * CAN into a byte array. If NULL, the default numerical encoder - * is used. */ - bool received_; /*!< received_ - True if this signal has ever been received.*/ - float last_value_; /*!< lastValue_ - The last received value of the signal. If 'received' is false, - * this value is undefined. */ - -public: - can_signal_t( - std::uint8_t message_set_id, - std::uint8_t message_id, - std::string generic_name, - uint8_t bit_position, - uint8_t bit_size, - float factor, - float offset, - float min_value, - float max_value, - frequency_clock_t frequency, - bool send_same, - bool force_send_changed, - std::map<uint8_t, std::string> states, - bool writable, - SignalDecoder decoder, - SignalEncoder encoder, - bool received); - - const can_message_definition_t& get_message() const; - const std::string& get_generic_name() const; - const std::string get_name() const; - const std::string& get_prefix() const; - uint8_t get_bit_position() const; - uint8_t get_bit_size() const; - float get_factor() const; - float get_offset() const; - float get_min_value() const; - float get_max_value() const; - frequency_clock_t& get_frequency(); - bool get_send_same() const; - bool get_force_send_changed() const; - const std::map<uint8_t, std::string>& get_states() const; - const std::string get_states(uint8_t value); - size_t get_state_count() const; - bool get_writable() const; - SignalDecoder& get_decoder(); - SignalEncoder& get_encoder(); - bool get_received() const; - float get_last_value() const; - - void set_prefix(std::string val); - void set_received(bool r); - void set_last_value(float val); -};
\ No newline at end of file |