diff options
Diffstat (limited to 'src/can/can-signals.hpp')
| -rw-r--r-- | src/can/can-signals.hpp | 128 |
1 files changed, 35 insertions, 93 deletions
diff --git a/src/can/can-signals.hpp b/src/can/can-signals.hpp index d4b22ccc..3bfc2b89 100644 --- a/src/can/can-signals.hpp +++ b/src/can/can-signals.hpp @@ -53,7 +53,7 @@ extern "C" * * @return a decoded value in an openxc_DynamicField struct. */ -typedef openxc_DynamicField (*SignalDecoder)(struct CanSignal& signal, +typedef openxc_DynamicField (*SignalDecoder)(can_signal_t& signal, const std::vector<CanSignal>& signals, float value, bool* send); /** @@ -67,106 +67,48 @@ typedef openxc_DynamicField (*SignalDecoder)(struct CanSignal& signal, * @params send - An output parameter. If the encoding failed or the CAN signal should * not be encoded for some other reason, this will be flipped to false. */ -typedef uint64_t (*SignalEncoder)(struct CanSignal* signal, +typedef uint64_t (*SignalEncoder)(can_signal_t* signal, openxc_DynamicField* value, bool* send); -/** - * @struct CanSignalState - * - * @brief A state encoded (SED) signal's mapping from numerical values to - * OpenXC state names. - */ -struct CanSignalState { - const int value; /*!< value - The integer value of the state on the CAN bus.*/ - const char* name; /*!< name - The corresponding string name for the state in OpenXC. */ -}; -typedef struct CanSignalState CanSignalState; - -/** - * @struct CanSignal - * - * @brief A CAN signal to decode from the bus and output over USB. - */ -struct CanSignal { - struct CanMessageDefinition* message; /*!< message - The message this signal is a part of. */ - const char* generic_name; /*!< generic_name - The name of the signal to be output over USB.*/ - uint8_t bitPosition; /*!< bitPosition - The starting bit of the signal in its CAN message (assuming - * non-inverted bit numbering, i.e. the most significant bit of - * each byte is 0) */ - uint8_t bitSize; /*!< bitSize - The width of the bit field in the CAN message. */ - float factor; /*!< factor - The final value will be multiplied by this factor. Use 1 if you - * don't need a factor. */ - float offset; /*!< offset - The final value will be added to this offset. Use 0 if you - * don't need an offset. */ - float minValue; /*!< minValue - The minimum value for the processed signal.*/ - float maxValue; /*!< maxValue - The maximum value for the processed signal. */ - FrequencyClock frequencyClock; /*!< frequencyClock - A FrequencyClock struct to control the maximum frequency to - * process and send this signal. To process every value, set the - * clock's frequency to 0. */ - bool sendSame; /*!< sendSame - If true, will re-send even if the value hasn't changed.*/ - bool forceSendChanged; /*!< forceSendChanged - If true, regardless of the frequency, it will send the - * value if it has changed. */ - const CanSignalState* states; /*!< states - An array of CanSignalState describing the mapping - * between numerical and string values for valid states. */ - uint8_t stateCount; /*!< stateCount - The length of the states array. */ - bool writable; /*!< writable - True if the signal is allowed to be written from the USB host - * back to CAN. Defaults to false.*/ - SignalDecoder decoder; /*!< decoder - An optional function to decode a signal from the bus to a human - * readable value. If NULL, the default numerical decoder is used. */ - SignalEncoder encoder; /*!< encoder - An optional function to encode a signal value to be written to - * CAN into a byte array. If NULL, the default numerical encoder - * is used. */ - bool received; /*!< received - True if this signal has ever been received.*/ - float lastValue; /*!< lastValue - The last received value of the signal. If 'received' is false, - * this value is undefined. */ -}; -typedef struct CanSignal CanSignal; class can_signal_t { - private: - struct can_message_definition_t* message_; /*!< message_ - The message this signal is a part of. */ - const std::string generic_name_; /*!< generic_name_ - The name of the signal to be output over USB.*/ - uint8_t bitPosition_; /*!< bitPosition_ - The starting bit of the signal in its CAN message (assuming - * non-inverted bit numbering, i.e. the most significant bit of - * each byte is 0) */ - uint8_t bitSize_; /*!< bitSize_ - The width of the bit field in the CAN message. */ - float factor_; /*!< factor_ - The final value will be multiplied by this factor. Use 1 if you - * don't need a factor. */ - float offset_; /*!< offset_ - The final value will be added to this offset. Use 0 if you - * don't need an offset. */ - float min_value_; /*!< min_value_ - The minimum value for the processed signal.*/ - float max_value_; /*!< max_value_ - The maximum value for the processed signal. */ - FrequencyClock frequency_; /*!< frequency_ - A FrequencyClock struct to control the maximum frequency to +private: + can_message_definition_t message_; /*!< message_ - The message this signal is a part of. */ + std::string generic_name_; /*!< generic_name_ - The name of the signal to be output over USB.*/ + uint8_t bitPosition_; /*!< bitPosition_ - The starting bit of the signal in its CAN message (assuming + * non-inverted bit numbering, i.e. the most significant bit of + * each byte is 0) */ + uint8_t bitSize_; /*!< bitSize_ - The width of the bit field in the CAN message. */ + float factor_; /*!< factor_ - The final value will be multiplied by this factor. Use 1 if you + * don't need a factor. */ + float offset_; /*!< offset_ - The final value will be added to this offset. Use 0 if you + * don't need an offset. */ + float min_value_; /*!< min_value_ - The minimum value for the processed signal.*/ + float max_value_; /*!< max_value_ - The maximum value for the processed signal. */ + FrequencyClock frequency_; /*!< frequency_ - A FrequencyClock struct to control the maximum frequency to * process and send this signal. To process every value, set the * clock's frequency to 0. */ - bool send_same_; /*!< send_same_ - If true, will re-send even if the value hasn't changed.*/ - bool force_send_changed_; /*!< force_send_changed_ - If true, regardless of the frequency, it will send the - * value if it has changed. */ - const std::map<const int, const std::string> states_; /*!< states_ - A map of CAN signal state describing the mapping - * between numerical and string values for valid states. */ - uint8_t state_count_; /*!< state_count_ - The length of the states array. */ - bool writable_; /*!< writable - True if the signal is allowed to be written from the USB host - * back to CAN. Defaults to false.*/ - SignalDecoder decoder_; /*!< decoder_ - An optional function to decode a signal from the bus to a human - * readable value. If NULL, the default numerical decoder is used. */ - SignalEncoder encoder_; /*!< encoder_ - An optional function to encode a signal value to be written to - * CAN into a byte array. If NULL, the default numerical encoder - * is used. */ - bool received_; /*!< received_ - True if this signal has ever been received.*/ - float lastValue_; /*!< lastValue_ - The last received value of the signal. If 'received' is false, - * this value is undefined. */ - - public: - can_message_definition_t* get_message() - { - return message_; - } + bool send_same_; /*!< send_same_ - If true, will re-send even if the value hasn't changed.*/ + bool force_send_changed_; /*!< force_send_changed_ - If true, regardless of the frequency, it will send the + * value if it has changed. */ + std::map<int, std::string> states_; /*!< states_ - A map of CAN signal state describing the mapping + * between numerical and string values for valid states. */ + uint8_t state_count_; /*!< state_count_ - The length of the states array. */ + bool writable_; /*!< writable - True if the signal is allowed to be written from the USB host + * back to CAN. Defaults to false.*/ + SignalDecoder decoder_; /*!< decoder_ - An optional function to decode a signal from the bus to a human + * readable value. If NULL, the default numerical decoder is used. */ + SignalEncoder encoder_; /*!< encoder_ - An optional function to encode a signal value to be written to + * CAN into a byte array. If NULL, the default numerical encoder + * is used. */ + bool received_; /*!< received_ - True if this signal has ever been received.*/ + float lastValue_; /*!< lastValue_ - The last received value of the signal. If 'received' is false, + * this value is undefined. */ - const std::string& get_generic_name() - { - return generic_name_; - } +public: + can_message_definition_t& get_message() const; + std::string& get_generic_name() const; }; void find_can_signals(const openxc_DynamicField &key, std::vector<CanSignal*>& found_signals); |