summaryrefslogtreecommitdiffstats
path: root/src/obd2-signals.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'src/obd2-signals.cpp')
-rw-r--r--src/obd2-signals.cpp181
1 files changed, 0 insertions, 181 deletions
diff --git a/src/obd2-signals.cpp b/src/obd2-signals.cpp
deleted file mode 100644
index 1a562d06..00000000
--- a/src/obd2-signals.cpp
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Copyright (C) 2015, 2016 "IoT.bzh"
- * Author "Romain Forlot" <romain.forlot@iot.bzh>
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "obd2-signals.hpp"
-
-#include "signals.hpp"
-
-const char *UNIT_NAMES[10] = {
- "POURCENT",
- "DEGREES_CELSIUS",
- "KPA",
- "RPM",
- "GRAMS_SEC",
- "SECONDS",
- "KM",
- "KM_H",
- "PA",
- "NM"
-};
-
-/*
-* Pre-defined OBD-II PIDs to query for if supported by the vehicle.
-*/
- std::vector<Obd2Pid> OBD2_PIDS = {
- { 0x04, "obd2.engine.load", 0, 100, POURCENT, 5, false},
- { 0x05, "obd2.engine.coolant.temperature", -40, 215, DEGREES_CELSIUS, 1, false},
- { 0x0a, "obd2.fuel.pressure", 0, 765, KPA, 1, false},
- { 0x0b, "obd2.intake.manifold.pressure", 0, 255, KPA, 1, false},
- { 0x0c, "obd2.engine.speed", 0, 16383, RPM, 5, false},
- { 0x0d, "obd2.vehicle.speed", 0, 255, KM_H, 5, false},
- { 0x0f, "obd2.intake.air.temperature", -40, 215, DEGREES_CELSIUS, 1, false},
- { 0x10, "obd2.mass.airflow", 0, 655, GRAMS_SEC, 5, false},
- { 0x11, "obd2.throttle.position", 0, 100, POURCENT, 5, false},
- { 0x1f, "obd2.running.time", 0, 65535, SECONDS, 1, false},
- { 0x2d, "obd2.EGR.error", -100, 99, POURCENT, 0, false},
- { 0x2f, "obd2.fuel.level", 0, 100, POURCENT, 1, false},
- { 0x33, "obd2.barometric.pressure", 0, 255, KPA, 1, false},
- { 0x4c, "obd2.commanded.throttle.position", 0, 100, POURCENT, 1, false},
- { 0x52, "obd2.ethanol.fuel.percentage", 0, 100, POURCENT, 1, false},
- { 0x5a, "obd2.accelerator.pedal.position", 0, 100, POURCENT, 5, false},
- { 0x5b, "obd2.hybrid.battery-pack.remaining.life", 0, 100, POURCENT, 5, false},
- { 0x5c, "obd2.engine.oil.temperature",-40, 210, DEGREES_CELSIUS, 1, false},
- { 0x63, "obd2.engine.torque", 0, 65535, NM, 1, false}
-};
-
-/**
- * @fn std::vector<std::string> find_signals(const openxc_DynamicField &key)
- * @brief return signals name found searching through CAN_signals and OBD2 pid
- *
- * @param[in] const openxc_DynamicField : can contain numeric or string value in order to search against
- * can signals or obd2 signals name.
- *
- * @return std::vector<std::string> Vector of signals name found.
- */
-void find_signals(const openxc_DynamicField &key, std::vector<Obd2Pid*>& found_signals)
-{
- switch(key.type)
- {
- case openxc_DynamicField_Type::openxc_DynamicField_Type_STRING:
- lookup_signals_by_name(key.string_value, get_obd2_signals(), found_signals);
- break;
- case openxc_DynamicField_Type::openxc_DynamicField_Type_NUM:
- lookup_signals_by_id(key.numeric_value, get_obd2_signals(), found_signals);
- break;
- default:
- ERROR(binder_interface, "find_signals: wrong openxc_DynamicField specified. Use openxc_DynamicField_Type_NUM or openxc_DynamicField_Type_STRING type only.");
- break;
- }
- DEBUG(binder_interface, "Found %d signal(s)", (int)found_signals.size());
-}
-
-std::vector<Obd2Pid>& get_obd2_signals()
-{
- return OBD2_PIDS;
-}
-
-uint32_t get_signal_id(const Obd2Pid& sig)
-{
- return (uint32_t)sig.pid;
-}
-
-void shims_logger(const char* m, const struct afb_binding_interface *interface)
-{
- DEBUG(interface, "%s", m);
-}
-
-void shims_timer()
-{
-}
-
-bool is_obd2_response(can_message_t can_message)
-{
- if(can_message.get_id() >= 0x7E8 && can_message.get_id() <= 0x7EF)
- {
- openxc_VehicleMessage message = {0};
- message.has_type = true;
- message.type = openxc_VehicleMessage_Type_DIAGNOSTIC;
- message.has_diagnostic_response = true;
- message.diagnostic_response = {0};
- message.diagnostic_response.has_bus = true;
- message.diagnostic_response.bus = bus->address;
- message.diagnostic_response.has_message_id = true;
- //7DF should respond with a random message id between 7e8 and 7ef
- //7E0 through 7E7 should respond with a id that is 8 higher (7E0->7E8)
- if(commandRequest->message_id == 0x7DF)
- {
- message.diagnostic_response.message_id = rand()%(0x7EF-0x7E8 + 1) + 0x7E8;
- }
- else if(commandRequest->message_id >= 0x7E0 && commandRequest->message_id <= 0x7E7)
- {
- message.diagnostic_response.message_id = commandRequest->message_id + 8;
- }
- message.diagnostic_response.has_mode = true;
- message.diagnostic_response.mode = commandRequest->mode;
- if(commandRequest->has_pid)
- {
- message.diagnostic_response.has_pid = true;
- message.diagnostic_response.pid = commandRequest->pid;
- }
- message.diagnostic_response.has_value = true;
- message.diagnostic_response.value = rand() % 100;
- pipeline::publish(&message, &getConfiguration()->pipeline);
- }
- else //If it's outside the range, the command_request will return false
- {
- debug("Sent message ID is outside the valid range for emulator (7DF to 7E7)");
- status=false;
-};
-
-/*
- * Will scan for supported Obd2 pids
- *
-obd2_handler_t::obd2_handler_t()
-{
- DiagnosticShims shims_ = diagnostic_init_shims(shims_logger, can_bus.send_can_message, NULL);
-
- int n_pids_, i_;
-
- n_pids_ = size(Obd2Pid);
- for(i_=0; i_<=n_pids_; i_++)
- {
- }
-}
-
-void obd2_handler_t::add_request(int pid)
-{
- DiagnosticRequest request = {
- arbitration_id: OBD2_FUNCTIONAL_BROADCAST_ID,
- mode: 0x1, has_true, pid};
-}
-
-bool obd2_handler_t::is_obd2_request(DiagnosticRequest* request)
-{
- return request->mode == 0x1 && request->has_pid && request->pid < 0xff;
-}
-
-bool obd2_handler_t::is_obd2_signal(const char *name)
-{
- if(fnmatch("obd2.*", name, FNM_CASEFOLD) == 0)
- return true;
- return false;
-}
-
-bool obd2_handler_t::decode_obd2_response(DiagnosticResponse* responce)
-{
- return diagnostic_decode_obd2_pid(response);
-}*/ \ No newline at end of file