diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/can/can-signals.hpp | 2 | ||||
| -rw-r--r-- | src/configuration.hpp | 48 |
2 files changed, 21 insertions, 29 deletions
diff --git a/src/can/can-signals.hpp b/src/can/can-signals.hpp index e618c19e..2bc77b09 100644 --- a/src/can/can-signals.hpp +++ b/src/can/can-signals.hpp @@ -125,7 +125,7 @@ typedef struct CanSignal CanSignal; class can_signal_t { private: - struct CanMessageDefinition* message_; /*!< message - The message this signal is a part of. */ + struct can_message_definition_t* message_; /*!< message - The message this signal is a part of. */ const std::string generic_name_; /*!< generic_name - The name of the signal to be output over USB.*/ uint8_t bitPosition_; /*!< bitPosition - The starting bit of the signal in its CAN message (assuming * non-inverted bit numbering, i.e. the most significant bit of diff --git a/src/configuration.hpp b/src/configuration.hpp index 4a41f24a..92655a6c 100644 --- a/src/configuration.hpp +++ b/src/configuration.hpp @@ -106,36 +106,28 @@ class configuration_t active_message_set_ = id; } + /// TODO: implement this function as method into can_bus class + /// @brief Pre initialize actions made before CAN bus initialization + /// @param[in] bus A CanBus struct defining the bus's metadata + /// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs. + /// @param[in] buses An array of all CAN buses. + /// @param[in] busCount The length of the buses array. void pre_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount); + /// TODO: implement this function as method into can_bus class + /// @brief Post-initialize actions made after CAN bus initialization + /// @param[in] bus A CanBus struct defining the bus's metadata + /// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs. + /// @param[in] buses An array of all CAN buses. + /// @param[in] busCount The length of the buses array. void post_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount); + /// TODO: implement this function as method into can_bus class + /// @brief Check if the device is connected to an active CAN bus, i.e. it's received a message in the recent past. + /// @return true if a message was received on the CAN bus within CAN_ACTIVE_TIMEOUT_S seconds. void logBusStatistics(can_bus_dev_t* buses, const int busCount); + /// TODO: implement this function as method into can_bus class + /// @brief Log transfer statistics about all active CAN buses to the debug log. + /// @param[in] buses An array of active CAN buses. + /// @param[in] busCount The length of the buses array. bool isBusActive(can_bus_dev_t* bus); -}; - -/// TODO: implement this function as method into can_bus class -/// @brief Pre initialize actions made before CAN bus initialization -/// @param[in] bus A CanBus struct defining the bus's metadata -/// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs. -/// @param[in] buses An array of all CAN buses. -/// @param[in] busCount The length of the buses array. -void pre_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount); - -/// TODO: implement this function as method into can_bus class -/// @brief Post-initialize actions made after CAN bus initialization -/// @param[in] bus A CanBus struct defining the bus's metadata -/// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs. -/// @param[in] buses An array of all CAN buses. -/// @param[in] busCount The length of the buses array. -void post_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount); - -/// TODO: implement this function as method into can_bus class -/// @brief Check if the device is connected to an active CAN bus, i.e. it's received a message in the recent past. -/// @return true if a message was received on the CAN bus within CAN_ACTIVE_TIMEOUT_S seconds. -bool isBusActive(can_bus_dev_t* bus); - -/// TODO: implement this function as method into can_bus class -/// @brief Log transfer statistics about all active CAN buses to the debug log. -/// @param[in] buses An array of active CAN buses. -/// @param[in] busCount The length of the buses array. -void logBusStatistics(can_bus_dev_t* buses, const int busCount); +}; |