diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/configuration-generated.cpp | 56 | ||||
| -rw-r--r-- | src/configuration.cpp | 116 | ||||
| -rw-r--r-- | src/configuration.hpp | 78 |
3 files changed, 143 insertions, 107 deletions
diff --git a/src/configuration-generated.cpp b/src/configuration-generated.cpp new file mode 100644 index 00000000..88f93bda --- /dev/null +++ b/src/configuration-generated.cpp @@ -0,0 +1,56 @@ + +///////////////////////////////////////////////////////////////////////////////////// +// THIS IS AN EXAMPLE +///////////////////////////////////////////////////////////////////////////////////// + +#include <configuration.hpp> + +#define OBD2_FUNCTIONAL_BROADCAST_ID 0x7df + +/* +* Pre-defined OBD-II PIDs to query for if supported by the vehicle. +*/ + std::vector<obd2_signal_t> OBD2_PIDS = { + { 0x04, "obd2.engine.load", 0, 100, POURCENT, 5, false}, + { 0x05, "obd2.engine.coolant.temperature", -40, 215, DEGREES_CELSIUS, 1, false}, + { 0x0a, "obd2.fuel.pressure", 0, 765, KPA, 1, false}, + { 0x0b, "obd2.intake.manifold.pressure", 0, 255, KPA, 1, false}, + { 0x0c, "obd2.engine.speed", 0, 16383, RPM, 5, false}, + { 0x0d, "obd2.vehicle.speed", 0, 255, KM_H, 5, false}, + { 0x0f, "obd2.intake.air.temperature", -40, 215, DEGREES_CELSIUS, 1, false}, + { 0x10, "obd2.mass.airflow", 0, 655, GRAMS_SEC, 5, false}, + { 0x11, "obd2.throttle.position", 0, 100, POURCENT, 5, false}, + { 0x1f, "obd2.running.time", 0, 65535, SECONDS, 1, false}, + { 0x2d, "obd2.EGR.error", -100, 99, POURCENT, 0, false}, + { 0x2f, "obd2.fuel.level", 0, 100, POURCENT, 1, false}, + { 0x33, "obd2.barometric.pressure", 0, 255, KPA, 1, false}, + { 0x4c, "obd2.commanded.throttle.position", 0, 100, POURCENT, 1, false}, + { 0x52, "obd2.ethanol.fuel.percentage", 0, 100, POURCENT, 1, false}, + { 0x5a, "obd2.accelerator.pedal.position", 0, 100, POURCENT, 5, false}, + { 0x5b, "obd2.hybrid.battery-pack.remaining.life", 0, 100, POURCENT, 5, false}, + { 0x5c, "obd2.engine.oil.temperature",-40, 210, DEGREES_CELSIUS, 1, false}, + { 0x63, "obd2.engine.torque", 0, 65535, NM, 1, false} +}; + +std::vector<can_message_set_t> CAN_MESSAGE_SET = +{ + {0, "example_messages", 1, 2, 2, 0, 19}, +}; + +std::vector<std::vector<can_message_definition_t>> CAN_MESSAGES_DEFINTION = { + { + {0x620, CanMessageFormat::STANDARD, {10, 0, nullptr}, false, (uint8_t)NULL}, + {0x442, CanMessageFormat::STANDARD, {10, 0, nullptr}, false, (uint8_t)NULL}, + }, +}; + +/** + * @brief Dumb SIGNALS array. It is composed by CanMessageSet + * SIGNALS[MESSAGE_SET_ID][CanSignal] + */ +std::vector<std::vector<can_signal_t>> SIGNALS = { + { + {&(CAN_MESSAGES_DEFINTION[MESSAGE_SET_ID][0]), "can.driver_door.open", 2, 4, 1.000000, 0.000000, 0.000000, 0.000000, {10, 0, nullptr}, false, true, nullptr, 0, false, decoder_t::booleanDecoder, nullptr, false, 0.0}, + {&(CAN_MESSAGES_DEFINTION[MESSAGE_SET_ID][1]), "can.driver_door.close", 0, 4, 1.000000, 0.000000, 0.000000, 0.000000, {10, 0, nullptr}, false, true, nullptr, 0, false, decoder_t::booleanDecoder, nullptr, false, 0.0} + }, +};
\ No newline at end of file diff --git a/src/configuration.cpp b/src/configuration.cpp index 0c5e8d08..f0f79093 100644 --- a/src/configuration.cpp +++ b/src/configuration.cpp @@ -15,61 +15,73 @@ * limitations under the License. */ -///////////////////////////////////////////////////////////////////////////////////// -// THIS IS AN EXAMPLE -///////////////////////////////////////////////////////////////////////////////////// - #include <configuration.hpp> #define OBD2_FUNCTIONAL_BROADCAST_ID 0x7df -/* -* Pre-defined OBD-II PIDs to query for if supported by the vehicle. -*/ - std::vector<obd2_signal_t> OBD2_PIDS = { - { 0x04, "obd2.engine.load", 0, 100, POURCENT, 5, false}, - { 0x05, "obd2.engine.coolant.temperature", -40, 215, DEGREES_CELSIUS, 1, false}, - { 0x0a, "obd2.fuel.pressure", 0, 765, KPA, 1, false}, - { 0x0b, "obd2.intake.manifold.pressure", 0, 255, KPA, 1, false}, - { 0x0c, "obd2.engine.speed", 0, 16383, RPM, 5, false}, - { 0x0d, "obd2.vehicle.speed", 0, 255, KM_H, 5, false}, - { 0x0f, "obd2.intake.air.temperature", -40, 215, DEGREES_CELSIUS, 1, false}, - { 0x10, "obd2.mass.airflow", 0, 655, GRAMS_SEC, 5, false}, - { 0x11, "obd2.throttle.position", 0, 100, POURCENT, 5, false}, - { 0x1f, "obd2.running.time", 0, 65535, SECONDS, 1, false}, - { 0x2d, "obd2.EGR.error", -100, 99, POURCENT, 0, false}, - { 0x2f, "obd2.fuel.level", 0, 100, POURCENT, 1, false}, - { 0x33, "obd2.barometric.pressure", 0, 255, KPA, 1, false}, - { 0x4c, "obd2.commanded.throttle.position", 0, 100, POURCENT, 1, false}, - { 0x52, "obd2.ethanol.fuel.percentage", 0, 100, POURCENT, 1, false}, - { 0x5a, "obd2.accelerator.pedal.position", 0, 100, POURCENT, 5, false}, - { 0x5b, "obd2.hybrid.battery-pack.remaining.life", 0, 100, POURCENT, 5, false}, - { 0x5c, "obd2.engine.oil.temperature",-40, 210, DEGREES_CELSIUS, 1, false}, - { 0x63, "obd2.engine.torque", 0, 65535, NM, 1, false} -}; - -std::vector<can_message_set_t> CAN_MESSAGE_SET = -{ - {0, "example_messages", 1, 2, 2, 0, 19}, -}; - -std::vector<std::vector<can_message_definition_t>> CAN_MESSAGES_DEFINTION = { - { - {0x620, CanMessageFormat::STANDARD, {10, 0, nullptr}, false, (uint8_t)NULL}, - {0x442, CanMessageFormat::STANDARD, {10, 0, nullptr}, false, (uint8_t)NULL}, - }, -}; - -/** - * @brief Dumb SIGNALS array. It is composed by CanMessageSet - * SIGNALS[MESSAGE_SET_ID][CanSignal] - */ -std::vector<std::vector<can_signal_t>> SIGNALS = { - { - {&(CAN_MESSAGES_DEFINTION[MESSAGE_SET_ID][0]), "can.driver_door.open", 2, 4, 1.000000, 0.000000, 0.000000, 0.000000, {10, 0, nullptr}, false, true, nullptr, 0, false, decoder_t::booleanDecoder, nullptr, false, 0.0}, - {&(CAN_MESSAGES_DEFINTION[MESSAGE_SET_ID][1]), "can.driver_door.close", 0, 4, 1.000000, 0.000000, 0.000000, 0.000000, {10, 0, nullptr}, false, true, nullptr, 0, false, decoder_t::booleanDecoder, nullptr, false, 0.0} - }, -}; +// Dumb signals and message implementation. To get compile. + std::vector<obd2_signal_t> OBD2_PIDS; + +std::vector<can_message_set_t> CAN_MESSAGE_SET; + +std::vector<std::vector<can_message_definition_t>> CAN_MESSAGES_DEFINTION; + +std::vector<std::vector<can_signal_t>> SIGNALS; configuration_t::configuration_t() - : obd2_signals_{OBD2_PIDS}, can_message_set_{CAN_MESSAGE_SET}, can_signals_{SIGNALS}, can_message_definition_{CAN_MESSAGES_DEFINTION}
\ No newline at end of file + : obd2_signals_{OBD2_PIDS}, can_message_set_{CAN_MESSAGE_SET}, can_signals_{SIGNALS}, can_message_definition_{CAN_MESSAGES_DEFINTION} + +configuration_t& configuration_t::get_configuration() +{ + return *this; +} + +can_bus_t& configuration_t::get_can_bus_manager() const +{ + return can_bus_manager_; +} + +diagnostic_manager_t& configuration_t::get_diagnostic_manager() const +{ + return diagnostic_manager_; +} + +uint8_t configuration_t::get_active_message_set() const +{ + return active_message_set_; +} + +const std::vector<can_message_set_t>& configuration_t::get_can_message_set() const +{ + return can_message_set_; +} + +const std::vector<can_signal_t>& configuration_t::get_can_signals() const +{ + return can_signals_[active_message_set_]; +} + +const std::vector<can_message_definition_t>& configuration_t::get_can_message_definition() const +{ + return can_message_definition_[active_message_set_]; +} + +const std::vector<obd2_signal_t>& configuration_t::get_obd2_signals() const +{ + return obd2_signals_; +} + +uint32_t configuration_t::get_signal_id(obd2_signal_t& sig) const +{ + return sig.get_pid(); +} + +uint32_t configuration_t::get_signal_id(can_signal_t& sig) const +{ + return sig.get_message()->get_id(); +} + +void configuration_t::set_active_message_set(uint8_t id) +{ + active_message_set_ = id; +}
\ No newline at end of file diff --git a/src/configuration.hpp b/src/configuration.hpp index 92655a6c..83b20e60 100644 --- a/src/configuration.hpp +++ b/src/configuration.hpp @@ -51,61 +51,29 @@ class configuration_t const std::vector<std::vector<can_signal_t>> can_signals_; const std::vector<std::vector<can_message_definition_t>> can_message_definition_; - configuration_t& get_configuration() - { - return *this; - } - - can_bus_t& get_can_bus_manager() - { - return can_bus_manager_; - } - - diagnostic_manager_t& get_diagnostic_manager() - { - return diagnostic_manager_; - } - - uint8_t get_active_message_set() - { - return active_message_set_; - } - - const std::vector<can_message_set_t>& get_can_message_set() - { - return can_message_set_; - } - - const std::vector<can_signal_t>& get_can_signals() - { - return can_signals_[active_message_set_]; - } - - const std::vector<can_message_definition_t>& get_can_message_definition() - { - return can_message_definition_[active_message_set_]; - } - - const std::vector<obd2_signal_t>& get_obd2_signals() - { - return obd2_signals_; - } - - uint32_t get_signal_id(obd2_signal_t& sig) - { - return sig.get_pid(); - } - - uint32_t get_signal_id(can_signal_t& sig) - { - return sig.get_message()->id; - } - - void set_active_message_set(uint8_t id) - { - active_message_set_ = id; - } + configuration_t& get_configuration() const; + can_bus_t& get_can_bus_manager() const; + + diagnostic_manager_t& get_diagnostic_manager() const; + + uint8_t get_active_message_set() const; + + const std::vector<can_message_set_t>& get_can_message_set() const; + + const std::vector<can_signal_t>& get_can_signals() const; + + const std::vector<can_message_definition_t>& get_can_message_definition() const; + + const std::vector<obd2_signal_t>& get_obd2_signals() const; + + uint32_t get_signal_id(obd2_signal_t& sig) const; + + uint32_t get_signal_id(can_signal_t& sig) const; + + void set_active_message_set(uint8_t id); + +/* /// TODO: implement this function as method into can_bus class /// @brief Pre initialize actions made before CAN bus initialization /// @param[in] bus A CanBus struct defining the bus's metadata @@ -129,5 +97,5 @@ class configuration_t /// @param[in] buses An array of active CAN buses. /// @param[in] busCount The length of the buses array. bool isBusActive(can_bus_dev_t* bus); - + */ }; |