Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I9cef3e6c4fa81bb75514e7b9c618494bad00ab6a
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Signals were separated by message definitions but it is unneeded and make
signals separated by message_set.
Change-Id: I83cbe687dafc37af0412dc5346837d06be918556
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Each projects, binder and generator, has to be compiled separatly.
CAN-binder will host high and low level binding
CAN-config-generator only the generator used for low level binding.
build.sh script just launch both build in their respective dir.
Change-Id: Ic77932660fcca507b23a631d4e4e790f608880ae
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I4efb09946474fadcf41cf9d04ad0f462ae4d0704
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: Ia0fe92fa08ed56255028a2a572be076a2a0e8665
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Each external libraries is a target that can be linked to a target project.
Change-Id: I4564eaa1c96c877c42f2a420599e27279f48d378
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I946dc9c44ecc6f9976c4accb65fc4b1efb4c7ca3
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I154d3976c0ab91ded20c07c44a1a586a98f3057f
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
'b7591d16c2686214d5d8dcc0739a233f15aee5db'
git-subtree-dir: can-config-generator
git-subtree-mainline: 9e444ade872bc436cf12bc12d03c3a5d51ac0b9e
git-subtree-split: b7591d16c2686214d5d8dcc0739a233f15aee5db
|
|
Use a simple optarg parser.
Change-Id: If0cd9da9db24a7889573e32f6b8ace33702c2c35
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I672a9b49d9d5a3953ba6dccaafbbd738839f64a6
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
# Conflicts:
# low-can-binding/libs/bitfield-c
# low-can-binding/libs/isotp-c
# low-can-binding/libs/openxc-message-format
|
|
Not useful to get a subscription on an adding error.
Change-Id: I211016a1cbeb9cd5677cd8f8c7a28ccc93ef9a34
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I147c439217dcc1f0709bd55f670ff1893cc77262
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Is there is no diagnostic message corresponding then do nothing
Change-Id: Ib6627b3c10b1b7a0a46d41323a6623efe808a015
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I7a6e5a7a068f205394b01e2b5ce00e59292d2182
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Possible divsion by 0. Don't know if it is good to keep different time unit
instead having one unit for project...
Change-Id: I73cfc1ab72d3420d337f10a9b79bdf305a3a2bc7
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: Idc4fd2f2d6d447d6b9e947d5b3129dc564a4bc5c
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I5ef9bad2ef398d3d293c3fc2edc18271042455f4
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Delay new recurring requests if there are already existing in flight and
cleanup active request to correctly set in_flight_ flag to false else new
request can't be launched as there is always an old one considered running...
Modify a little bit DEBUG message and cleanup useless code.
Change-Id: I39f865bbc6d00188d3cddd1d81437b9e3ca51269
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
When push events if there is no more subscribers to that event then call
a function that will cleanup that request from diagnostic manager queue.
Change-Id: I8153701074453444a5bba6f1374401bdf230f7e6
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Unsubscriptions weren't managed anymore since we handle supported flag in
diagnostic messages. Now it's back, unsubscription against appfw is done
as well as canceling recurring active diagnostic request.
Change-Id: I22ebba771646624cb323e72dd7bf21027b6c6ba7
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change to CLOCK_BOOTTIME instead of CLOCK_MONOTONIC
Change-Id: Iaa1a65a80e3aaa8e622ea1e3eb4b6a36b4dcd225
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Make sure that we finish to process every message in queue before refill them
cause' CAN read run faster than decoding and pushing event. So it's a try to get
all message processed.
Change-Id: Idce2bc4d79920adc2bf478177c4e3defed39867b
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I93d0cbcae8e2cdf1144ffd981c93a109682c1685
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: If5da63d2fdd498dcb6dde10469acaa91b00e60df
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
This explicit use cases with virtual CAN device or Porter board CAN devices
Also, it add a complete trip with "vehicle.speed" obd2 signal recurring requests.
to be use with canplayer to replay a real car trip.
Change-Id: I66c762fa23ed409c812765d6d82e78138edbd455
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Useless tests and type cast about numbers.
Change-Id: I6fe13b7dfec8529520730f83e83d2dd3da3a674c
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: Ia47159fb18797681fb1dd132be5173e167d8850b
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I669fc1f0b078e151dfb0cbb17c3d626bb43930d2
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Merge pull request #1 from shogun656/master
|
|
was annoying me :)
|
|
Change-Id: Ied85c5acef8e9ce215c01166180fc07d5c5b0dcd
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Point to branch v1.0 instead of master
Change-Id: I70b6b0e35dbbdd78840fda893c6028b2e3975afc
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: If2acf83a0f01741c90cab15e10188b2aeffd88b3
|
|
Change-Id: I2a04c0852c2b6c87391cf282c30cbcb669226c1d
|
|
Fix: elapsed function return that do not compute elapsed_time at first time
Fix: reworked should_send() to get it work with our scheduling workflow
Reschedule trying to send request if recurring even it is in flight.
Change-Id: Idce54cb9bf62616c891a8a25a6c478f931350bc7
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
|
|
Fix initial svg page size to avoid image distortion,
and generate "real" jpg image using imagemagick convert tool
|
|
Change-Id: I0e0753a520471129987d26e0a03be732fc311d02
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
|
|
|
|
Signed-off-by: Sebastien Douheret <sebastien.douheret@iot.bzh>
|
|
Change-Id: I5daa7e0a815c84bc3e373888aef64518ef344449
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: Ifde336309bd6358ee20bd8c45a06daf5ba3329c0
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I7c1a85a66fcc3a0ecdc11a4fc1c8626410b5ade3
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
target_compile_feature isn't compatible with 3.0
Change-Id: I38b68b9946abc6270b0ac66ee9ff93a044e336e6
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: Ibd16454f0cbc7f2a3e17f8cf0580174de3df87e3
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
Change-Id: Ia7e9875f6999aa50f386c82945a430db93664254
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I8950fb17cf7431070772379d1b8ce52a0a689fbd
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Rework clone order as well as directory location to make sure cloning in
separate directory.
Change-Id: I2ac3adecf363af7b702462d4a5af1f2c84220900
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|