Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Ia62cba8da3db425d63c18104d597cd577f9651ab
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Present the CAN binding architecture.
Change-Id: I7ab2a96e468a57e882a2eca93aedaacdc057794b
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I8b507d3e34ed3d34680e6e15b7f97b7e17fc1c4f
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Hardcoded offset was for testing purpose, now we can use frequency offset.
Change-Id: I920e61cd8f587ead9c77aec158edb4dee28b927d
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
As returned code was negative value the sd_event_source stopped considering
that was an error. If statement was to check that sd_event_set_enabled was
ok, so unref and return wasn't at the right location...
Change-Id: I91cc943c20af80a31b4f66f5714ccef93c0fdbd2
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
It was filled by hand for the moment.
Change-Id: Ie72cd670bbc9c7a568507290f4bb25019ec58098
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Reason is that the simple message is used to match a subscribed signals
in the map. So it has to be the same that at the subscription.
Change-Id: Ie9504583948027523a7288b5e4a20707c49b6d59
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: If1fbbefa386e1e72121ff28fce6f55569129272c
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I97af1fab19d7d071e7c34d4149ae67442f257690
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I5df96540400b833e684001f8fc5fa33ff1892bae
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Made some cleaning about unused things or obsolete.
Review existing comments, adding missing comments.
Reformat some long long constructor.
Change-Id: Ibae247d1295a7a85b49d0ecee473022755d42b8b
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I1608db0120a0501af0e4327fe348ef149d90bad4
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Needed to use generator.
Change-Id: I82b44fa1e53c55e2cd90ae7017906a22b7f0636e
Signed-off-by: Loïc Collignon <loic.collignon@iot.bzh>
|
|
Signed-off-by: Loïc Collignon <loic.collignon@iot.bzh>
|
|
Supported boolean member about diagnostic messages is now used. When
a response is received, completed but not successful, then set the diagnostic
message as not supported and clean the request from the queue.
Subscription remains for now, not cool but will be fix soon.
Change-Id: Ia5dc78d4a770f80f144724f4df6eabd2ffd4b8cc
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I1e43b0aeaff738db11695e77fee23e8c9809f0c1
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Now unsubscription really make unsubscription and stop polling diagnostic
request.
Change-Id: I31830c7af97506e1231fb5f1244c350520a2df29
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: Ia838d06885bc95196c5afc3668c0b028cb0f2763
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Retrieve adr name prefixed will add uneeded prefix as it is already present.
At build time of a Diagnostic request from a diagnostic message, this prefix
is added so adr name is already correct.
*adr: active diagnostic request
Change-Id: Ie5c364bf47a28c80290021651941cd37fa26321a
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Rename has been made with filter-branch using utility
git-mv-with-history, so file history follow the rename operation.
This is a commit to fix include and CMake file.
Change-Id: I8542c7def3143854a2008fa069dd3232f2497394
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Align frequency type to float and removed useless code.
Change-Id: I13d9407808c42ece0d3fd761351752ad661e01e0
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Diagnostic request must have a name to be subscribed. Else, we
can't decode or event push for now.
Change-Id: I0901a71da31320d8598e512614437aceb552713d
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I787cd94b338c458fda0259bd2bcf47a1fa85cc3f
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Add some helpers functions used to check VehicleMessage validity or build
default VehicleMessage struct.
Change-Id: Ia1cca8b4cb3dd70a739d0f2ee9165b72fdac48d4
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Added decoder and callback member that will be set by generator and taken
at submission to be used later, storing them into an active diagnostic
request instance, when response CAN message comes in.
Change-Id: I9ded05de3bb28ec55e4e007d72d0e1924141a6a6
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change the method to static 'cause it will be call from outside of the class.
Change-Id: I88dcd845559fac7892cd489cd6e8198c143ee2a8
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
A CAN message will be considered as a Diagnostic response when its
arbitration ID is between standardized 0x7E8 and 0x7EF.
Checking which request belong to that response will done in later methods
Change-Id: I7a093edf44b62a4552b90fe3d8935f94dc677cf4
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Returning to Signal states map avoiding hole in vector allocation as we did
not know how many state a Signal can takes. So a map may be a better choice
Will see.
Change-Id: Ie3ccdbd31296c5c0ebaefc109e75f2e0cde03756
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Main reason for that behavior revert is because of generator that rely
on CAN device name and so we have point on these object by specify the
device name.
Instead of shared pointer between objects, instead binding is based on
device name. With a device name you can get the shared pointer on it using
new static method from can_bus_t object.
Change-Id: I331e0ad8d03c88a15c697d12a9fce3699b0cd962
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
can_signal_t and active_diagnostic_message return name
with prefix using this method. If you need without it then
use get_generic_name.
Change-Id: I6b153eb20214049c10619d39fcc65c8641a9e32f
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: Idcc7e5b4dedad8e39eb829b25502d7dea3e5b29a
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I9a0726ab41c4801e7a5305731ce78ddd03aff9e1
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I752db65cb3fbca4d33b932f3a0c597adfaf79903
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Implements event_loop logic.
Change-Id: Ia5ac32820a0421bbcb69d8b0dd3bea2b7b582444
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Control size manually, don't rely on STL container.
Change-Id: Iede2f9b233c5b8a6dc77c9b146ffc92da8e7a989
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
If conversion must be made then make it at the call
not upstream.
Change-Id: Ief6dee40355c7b39b5e27d0ba3dc02717fadf43b
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
to get able to get difference between classic CAN messages
and diagnostic messages based on name signals prefix.
Change-Id: I696facc58f38150e0457d519dcabffba750a8db3
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I341d29d217b2a92652e9985d8c93829e0211bddc
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Regular events is made launch a timerfd event from binder event loop and then
in the event handler, reschedule next launch in the future based upon the
signal frequency.
Change-Id: I0b1e84eb2135474f4bcc5ee256ba513eea4035a6
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
for the needed case. They were some inversion between needs of
char variable and string.
Fix: don't add diagnostic request if it is an unsubscrition
operation.
Change-Id: I1acedc413e7c5fe57da86812faf8d3c83d13c405
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
while adding the request. It is more logic to make that here
than in the subscription operation.
Change-Id: I19b29bc11c5fb6e5828a0bf189fac1333b0199ed
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
between diagnostic manager vector.
Change-Id: I9ea196b5dc5bbf2dd4509080a9a58d754fa42b6c
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I16aff65c5ce22faac78e3f1d99ce7b33941c007c
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: Ia39e78aca00a49c7cee5e42d26ba1ef2b49d3709
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: Ib52f22e7bc5bc5d14edbb31ad6006caee23c4098
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Change-Id: I8485dec1ec5bb5dbea7edf4d9ac3a7d800b567b2
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
its objects. We don't want random initialization on
boolean value of openxc_DynamicField (has_string, has_numeric...)
else we have a risk that the final decoded and convert into json
object will not be the good one.
Change-Id: If4d69e6ace615fd8e097ba9a04e5482c82b9a7db
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
to a vector.
Change-Id: I185724f2966fecac6659d401751da56d2886ed9d
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
always register generic_name into subscribed_signals.
It will be the output on event and make easier to find
the subscribed signals into the map without prefix.
Change-Id: Iaf0060bedb54003b0c77121afd2bd35d832dba25
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
to the ones generated.
Change-Id: I6b0b778f59ac52fe66e36a327f60ae58550ac271
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|