summaryrefslogtreecommitdiffstats
path: root/low-can-binding/can
AgeCommit message (Collapse)AuthorFilesLines
2020-01-08can: Remove extended flagsRomain Forlot2-12/+8
It doesn't matters to know whether or not a can signal is using standard or extended CAN ID because this could be retrieved using bit mask on the CAN ID when receiving and sending. Bug-AGL: SPEC-2988 Change-Id: Id96c576045bf087df51beb011742ad631336f814 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2019-12-05Fix filter bitmask generationScott Murray1-1/+1
Fix filter bitmask generation in encoder_t::encode_data; the mask bits need to be left-aligned in each byte, not right-aligned. Bug-AGL: SPEC-3013 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ie084f81e3d8c06e69b5bb7562055187395099ac7
2019-08-30Remove in function convert_from_addr, the variable flags was not usedArthur Guyader1-1/+0
Bug-AGL : SPEC-2780 Change-Id: Ib31a32565c3bc38ea039003bd924a43318fb7c4e Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh>
2019-08-30Add new decoders bytes for signal of long sizeArthur Guyader2-0/+92
This commit adds the decoder bytes. It allows to return a sequence of bytes in hexadecimal form. Bug-AGL : SPEC-2780 Change-Id: I27180774f044c48a9d7baa2739b15a2e85b8b2e2 Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh>
2019-08-30Change signature of decodersArthur Guyader3-53/+54
This commit changes the signature of decoders. It is now necessary to specify the version of the signals so that the low-can-generator generates the associated wrapper and not need to modify the decoder already developed. Bug-AGL : SPEC-2780 Change-Id: I044b1a3a6bacb9fc59bd6d3f77a1dbc437a3aa86 Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh>
2019-08-30Add some typedef to reduce the size of the linesArthur Guyader6-22/+26
Bug-AGL : SPEC-2779 Change-Id: Iebcf7492133cd7789d301593ff999b24ae10a054 Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh>
2019-08-30Update bit position and bit size in signalArthur Guyader2-14/+15
It's necessary to change the size of attributes to manage multi packet signal. Bug-AGL : SPEC-2779 Change-Id: If211c218ffa5a2e81ccfb32d3a5eeae0267e8f74 Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh>
2019-08-30Add feature ISO TP (multi frames and peer to peer)Arthur Guyader8-7/+45
This commit adds the ISO TP feature. The ISO TP protocol allows to communicate between two ECU. The protocol allows multi packets management. Bug-AGL : SPEC-2779 Change-Id: Ic222615b547f28e926930e6c1dea2c0265055afd Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh>
2019-08-30Replace all enum types with masksArthur Guyader9-90/+69
This commit allows to change all enum types by masks. Now to implement new protocol you don't need to add more attribute in class. All can be contained in the flags field. Bug-AGL : SPEC-2779 Change-Id: I814d0052139be5d5efefc9ff1b4b558f46b85e90 Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh>
2019-08-30Change function get_bcm_msg to return a reference.Arthur Guyader2-2/+2
Bug-AGL : SPEC-2779 Change-Id: I303d2423151dac497917299737070ffb645267d3 Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh>
2019-08-30Move attributes flags and maxdlenArthur Guyader5-22/+41
This commit moves attributes flags and maxdlen from class can_message_t to class message_t. Bug-AGL : SPEC-2779 Change-Id: I56f9cd54d8b9822636311c603501326b36692cf4 Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh>
2019-08-29Add function to convert vector to canfd or can frame.Arthur Guyader2-1/+64
This commit allows to convert the data vector to canfd or can frame. In the two cases the struct is a canfd frame, but if the type is not fd, the max size of a frame is 8. Bug-AGL : SPEC-2779 Change-Id: I60edf6a602a47572d5e5bfb508c7ca6d8761832b Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh>
2019-08-29Add function get_data_vector with indexArthur Guyader2-0/+35
This commit adds the function get_data_vector to get another vector between the index indicates. Bug-AGL : SPEC-2779 Change-Id: I704d78467839ee7f9a2fec397e9b0db8da43d79d Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh>
2019-08-29Update function to encode and decode messageArthur Guyader3-90/+164
This commit update encoder and decoder files. This new implementation allows to manage larger signals. Bug-AGL : SPEC-2779 Change-Id: Iec6dfbd279863aa8b8e8f9e3ce951f0c8aa80dae Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh>
2019-08-29Update j1939 decode with function to_hexArthur Guyader1-19/+2
Bug-AGL: SPEC-2386 Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh> Change-Id: Ia10abfd73a6ea9d42770566e23bc4b206723f081
2019-08-29Uniform indentation with tabulationArthur Guyader4-152/+152
Bug-AGL : SPEC-2779 Change-Id: I834221ae1a04fdb188062ce1b7251e648c4845de Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh>
2019-08-12Integrate the J1939 features : address claiming and write.Arthur Guyader4-19/+66
This commit allows to write J1939 messages and add the management of the address claiming. Bug-AGL: SPEC-2386 Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh> Change-Id: I1bb95a7ba6f6ebe463319c3972d9d46897181d51
2019-08-12Add feature to build messages and fix some functionsArthur Guyader10-48/+313
Allows to build a message (J1939,BCM) with a signal and a value. Bug-AGL: SPEC-2386 Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh> Change-Id: Iadca13a927ff83f713f39da441c88356695a1285
2019-07-03signals.cpp: Make an insensitive string comparisonhalibut_8.0.2halibut_8.0.1halibut_8.0.0halibut_7.99.3halibut/8.0.2halibut/8.0.1halibut/8.0.0halibut/7.99.38.0.28.0.18.0.07.99.3Romain Forlot1-1/+1
When sending a CAN signal make an case-insensitive comparison as it isn't necessary to be strict on that, so case insensitive if fine. Update the documentation accordingly. Bug-AGL: SPEC-2582 Change-Id: I998b64cdd9a381da3da582aeba42ab726fff1259 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2019-06-27Minor improvementsRomain Forlot4-9/+4
- Remove now unused forward declaration of active_diagnostic_request_t - Factorize calling the signals_manager at binding initialization. - retab... Bug-AGL: SPEC-2386 Change-Id: I418fddd80ef8b856c198dc697760a6edf0918012 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh> Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2019-06-26Rename some of the classes removing can- prefixRomain Forlot19-172/+267
This commit renames files and classes : - can_message_definition_t -> message_definition_t - can_message_set_t -> message_set_t - can_signals_t -> signals_t This prepares the implementation of j1939 protocol. Bug-AGL: SPEC-2386 Change-Id: Ie3ee4f25c236c861b92eb12a56fa03a5a9afffbb Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh> Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh> Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2019-06-26New constructor j1939 message definitionRomain Forlot2-0/+33
Add a new constructor for the j1939 message definition with additional name and data length member. Bug-AGL: SPEC-2386 Change-Id: Iff531f122942b6741a6a97718e639a4814b8d2bf Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2019-06-26Change can_message_t class usage for new j1939Romain Forlot16-121/+507
This commit transforms the class can_message_t as the base class and creates two derived classes: j1939_message_t and can_message_t. Bug-AGL: SPEC-2386 Change-Id: I6d3afd8e4f5abff2cd0ec4e9910bd52a2893de76 Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh> Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh> Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2019-06-19Modify to receive signal with bigger value than the number of statesHiroki Koga1-1/+1
Fix the bug about a part of decode_state in can-signals.cpp. If a state of signal is allocated not in order, the signal which is bigger value than the number of states cannot be received, because can_signal_t::get_states compares signal value with the number of states. By this modification, get_states is changed to judges whether a signal value exists in states or not. Bug AGL: SPEC-2504 Change-Id: Ia67413507950654567808f7a08d0b0b3b47cbd23 Signed-off-by: Hiroki Koga <hiroki@witz-inc.co.jp>
2018-12-14Smalls improvementsRomain Forlot1-4/+4
- Improve robustness reading a BCM socket Adding checks on system calls and remove the initialization of the struct that will hold the received message, not so much needed in that case. - More accurate log message at subscription/unsubscription step whether this is a FD CAN messages or not and if this a subscription or an unsubscription that is requested. - Initialize the full struct of vehicle message to avoid memory warning about conditionnal jump based on uninitialized bytes. - Memleak: Free raw pointer on active diagnostic requests Change-Id: I4bbf4d851c0fa1efdb6fa6034fac3d1dcafa1a73 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2018-12-14Cleaning the code for now unused functionsRomain Forlot7-151/+18
Also formating and retabulating some comments Change-Id: I95eda93e78fabeb336ca02e94307364954ab2318 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2018-12-14CAN FD implementationRomain Forlot6-132/+23
Add a flag to CAN message definitions which set the message as using FD protocol if true. Use a new generated file with the new FD flag field on the message definitions. Change BCM socket "struct" using an union to store the CAN frames either using the FD struct or the classic non FD struct. A BCM socket can only one frame type once configured. Use as much as possible the "struct canfd_frame" in the binding and only make a difference before writing or reading the socket. From a memory point of view both struct are identical and only the last member differ and could hold more data with messages of 64 bytes long. So the canfd_frame is compatible with the can_frame and can be differentiated by a flag set in the can_id member. Remove now unused code processing can_frame. Keep the diagnostic manager using the classic CAN frame. Set the maximum number of frames that a BCM socket can handle to 257. Bug-AGL: SPEC-1980 Change-Id: Ifcc041281ea6745fc25cbd384743761f4446f489 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2018-11-22Adjust "encoder" signature to fit cpp usageRomain Forlot1-2/+2
Adjust "encoder" signature to fit cpp usage like for the decoder functions. Change-Id: I5872c5e32fd69356124fefbc82fd1f77ab8acbf4 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2018-11-22Code format and style changesRomain Forlot2-7/+7
Change-Id: Icfb7cdb53deba8d82b91f884c6b815adf0f17adf Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2018-07-06Fix: correctly stop the binding.Romain Forlot2-2/+13
Automatically destroying C++ objects wasn't sufficient since it uses thread with locks that were waiting forever if there is no CAN bus activity. Now correctly wake-up the threads to ends them even if there without activity on the CAN bus. Change-Id: I69d74a34a8dbea4df7c8090aa47abf1c43133020 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2018-05-24Fixing typos made in commentsydimitrov9-27/+27
This change set fixes the comments made by previous contributors v2: Fix line end v3: Making changes to comments as suggested by reviewers v4: Removing trailing spaces v5: Clearing small typo in low-can-cb.cpp on line 142 Change-Id: Ifbcfc3b2d131d1db0b25e472955b21e98cc09f45 Signed-off-by: ydimitrov <y.dimitrov.14@gmail.com>
2018-03-15Change subscribed signals search to check filters as wellJonathan Aillet1-2/+2
When a new subscription is made, search in existing subscription for a combination of a signal and a filter instead of searching for just a signal. In this way, each subscription will receive signals according to their requesting filter. Bug-AGL: SPEC-1339 Change-Id: I22cb96a2dbaaf48dbd77025ff1610bde151b19b4 Signed-off-by: Jonathan Aillet <jonathan.aillet@iot.bzh>
2018-03-14Delete obsolete references.Jonathan Aillet1-5/+0
Delete obsolote references such as use of acceptance filters, timers, etc. Signed-off-by: Jonathan Aillet <jonathan.aillet@iot.bzh>
2018-01-02Make low-can use afb-genskel by defaultRomain Forlot3-3/+0
Cleaning header file inclusion Change-Id: Ic0dd9637ecd491692bd4b8b39e9602e85498c0a9 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-11-30Correctly reconstituting entire CAN frameRomain Forlot1-5/+6
Change-Id: I39d226c6f6268ec880739e6b9230eb42ce475971 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-11-08Send entire CAN message rather than CAN signal.Romain Forlot1-7/+13
Old behavior send only the CAN signal, now we retrieve the CAN message value instead and send the CAN message with all CAN signals composing the message. Change-Id: I2394cc30630601e46aa939ddda88e8616372179e Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-11-08Fix wrong filter condition (Thanks Parai Wang)Romain Forlot1-1/+1
Change-Id: I7d3eccc2d4b99d543b669c7b3c8d7a38670d860f Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-09-28Add timestamp to diagnostic message event tooRomain Forlot1-0/+2
Change-Id: Id01a15efe1b6aa063ac9bb2d3989ff195035eeb0 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-09-13Add timestamp val to returned json object on eventRomain Forlot1-3/+1
Change-Id: Ibfb514eb27c0378dba7e302755e5f6f95b0ca242 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-07-21Examples reorganizationRomain Forlot1-0/+65
Separated by protocols and created signals from reversed engineered signals. Meld all used signals into an "agl-vcar" folder to be used as default. Change-Id: I27f7bc227a6fcea3db6672819e6a4d7bbf09863b Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-07-21FormatRomain Forlot3-3/+3
Change-Id: I036befbfb38b01d046d35a1364c28e0835dcbd41 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-07-21Fix: encoding value method has wrong signature.Romain Forlot2-7/+7
Change-Id: I227c721f782eef85f83db9ffdb7cc0e180d17da4 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-07-21Be able to write raw frame & encode value to sentRomain Forlot4-0/+207
Check whether the argument is a raw frame or a Signal + Value to encode then send. 1 new class to handle encoding part of a value as well as a new method for can_signal_t which return index of a map from its value. Change-Id: I288d2aeec28ce74c9ca35750db18557c9251e1df Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-07-21Cleaning and renaming.Romain Forlot6-78/+54
Change-Id: I24b78e3d41124650da286a50297f1c51410c2c6a Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-07-10Different errors between no file and wrong contentRomain Forlot1-5/+8
Change-Id: Ic705e09811b3479af8dc2287c53fa53fdcdff656 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-07-05Fix: uninitialized variables.Romain Forlot1-2/+2
Change-Id: I1e506f225ce6f17836708c32106ce45c80150ee6 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-07-04DAB RC3 Fixes follows appfw API break.Romain Forlot3-18/+18
Following functions now return 0 on success and negative value on failure : o afb_req_subcall o afb_req_subcall_sync o afb_service_call o afb_service_call_sync Verbosity macros used in v2 bindings now needs to be prefixed with AFB_ (ERROR -> AFB_ERROR) Change-Id: Ica4346f215bb142fcda0c6ea15e7074f7091f4cc Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-06-20Separation Generator to a dedicated repoRomain Forlot13-0/+1882
Change-Id: Id94831651c3266861435272a6e36c7884bef2c45 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-04-14Change directory architecture to use 2 separated projects.Romain Forlot15-2028/+0
Each projects, binder and generator, has to be compiled separatly. CAN-binder will host high and low level binding CAN-config-generator only the generator used for low level binding. build.sh script just launch both build in their respective dir. Change-Id: Ic77932660fcca507b23a631d4e4e790f608880ae Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-04-11Handle project new architecture using new CMakeFileRomain Forlot15-0/+2028
Change-Id: I672a9b49d9d5a3953ba6dccaafbbd738839f64a6 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh> # Conflicts: # low-can-binding/libs/bitfield-c # low-can-binding/libs/isotp-c # low-can-binding/libs/openxc-message-format