agl-service-can-low-level - Low level CAN service made to decode and write on CAN bus.

Age	Commit message (Collapse)	Author	Files	Lines
2016-09-14	Multi frame (#6)	Zac Nelson	2	-7/+14
	* increase payload size just for diag responses to support multi-frame responses. limited to 255 bytes for now. * not all diag requests with modes greater than 0xa have a 2 byte pid. need to check was pid_length should be based on the size of the pid. * remove line that does nothing. * add multi_frame field to DiagnosticResponse and update based on IsoTpMessage. Need this upstream for timeout calls specific to multi frame. * update isotp-c submodule. * update autoset_pid tests. check that pid_length is dynamically set based on pid value. adjust other tests to use 2-byte pid for enhanced diagnostic mode requests. * add test for multi-frame response. * update changelog.
2014-09-27	Propagate errors from isotp-c when sending requests.	Christopher Peplin	1	-2/+11

2014-09-27	Fix rendering of message arb ID in strings - use hex, not decimal.	Christopher Peplin	1	-4/+4

2014-03-26	If an OBD-II PID is unrecognized, return fully parsed payload.	Christopher Peplin	1	-1/+1

2014-03-14	Force 0x3e "pid" (actually service ID) to be 1 byte.	Christopher Peplin	1	-1/+1

2014-03-14	Add NRC for incomplete messages.	Christopher Peplin	1	-0/+1

2014-03-06	Add a function to check if a request is completely sent.	Christopher Peplin	2	-0/+11

2014-02-27	Use proper format specifier for uint32_t.	Christopher Peplin	1	-2/+3

2014-02-27	Increase arb IDs to uint32_t to fit extended IDs.	Christopher Peplin	3	-7/+21

2014-02-26	Optionally split up preparing a diag request and actually sending it.	Christopher Peplin	2	-33/+82

2014-02-19	Quiet some misleading log messages.	Christopher Peplin	1	-28/+10

2014-02-19	Leave payload parsing to applications using this library.	Christopher Peplin	2	-4/+2

2014-02-18	Shorten the negative response code log message.	Christopher Peplin	1	-1/+1

2014-02-14	Only include PID in log output if request has one.	Christopher Peplin	1	-3/+10

2014-02-14	Show negative response codes in log output.	Christopher Peplin	1	-6/+20

2014-02-14	Add helper functions to render requests and responses as strings.	Christopher Peplin	2	-35/+86

2014-02-14	Clean up log output if a diag request has no payload.	Christopher Peplin	1	-10/+19

2014-02-14	Clarify when we are using int vs float and move decoders up a level.	Christopher Peplin	3	-14/+21
	Fixed #4 - the Decoder function type signature actually belonged one level higher, in the application, since there's no capability of actually using it in this library at the moment.
2014-02-14	Add an option to pad outgoing CAN frames to 8 bytes (on by default).	Christopher Peplin	2	-1/+7
	Fixed #3.
2014-02-14	Display mode in more recognizable hex format in log messages.	Christopher Peplin	1	-2/+2

2014-01-24	Add calculations for many OBD-II PID values.	Christopher Peplin	3	-2/+39

2014-01-24	Automatically set pid length for outgoing requests if not specified.	Christopher Peplin	2	-7/+26

2014-01-24	Remove a few resolved TODOs.	Christopher Peplin	1	-5/+0

2014-01-24	Wrap lines at 80 characters.	Christopher Peplin	1	-6/+8

2014-01-20	Don't try and rx broadcast response on all handles after one completes.	Christopher Peplin	1	-2/+4

2014-01-20	Add a function to parse the entire payload as a float.	Christopher Peplin	2	-0/+9

2014-01-20	Rename from simply obd2 to more general UDS (unified diagnostics).	Christopher Peplin	5	-0/+645
	Fixed #1.