1 files changed, 78 insertions, 0 deletions
diff --git a/README.md b/README.md
index 1bfe68d..ab76ec2 100644
--- a/README.md
+++ b/README.md
@@ -31,3 +31,81 @@ JSON response has a single field **frequency** which is the currently tuned freq
 ### station_found Event JSON Response
 
 JSON response has a single field **value** of the frequency of the discovered radio station.
+
+# AGL Radio Tuner Binding
+
+## FM Band Plan Selection
+
+The FM band plan may be selected by adding:
+```
+fmbandplan=X
+```
+to the [radio] section in /etc/xdg/AGL.conf, where X is one of the
+following strings:
+
+US = United States / Canada
+JP = Japan
+EU = European Union
+ITU-1
+ITU-2
+
+Example:
+```
+[radio]
+fmbandplan=JP
+```
+
+## Implementation Specific Confguration
+
+### USB RTL-SDR adapter
+
+The scanning sensitivity can be tweaked by adding:
+```
+scan_squelch_level=X
+```
+to the [radio] section in /etc/xdg/AGL.conf, where X is an integer.  Lower
+values make the scanning more sensitive.  Default value is 140.
+
+Example:
+```
+[radio]
+scan_squelch_level=70
+```
+
+### M3ULCB Kingfisher Si4689
+
+The scanning sensitivity can be tweaked by adding:
+```
+scan_valid_snr_threshold=X
+scan_valid_rssi_threshold=Y
+```
+to the [radio] section in /etc/xdg/AGL.conf, where X and Y are integers
+between -127 and 127.  The SNR value is in units of dB, and the RSSI is in
+units of dBuV.  Lower values make the scanning more sensitive.  Default
+values in the Si4689 are 10 and 17, respectively. You may determine the
+values that the Si4689 is seeing when tuning by examining the results of
+tuning in the systemd journal, looking for lines like:
+
+Example:
+```
+[radio]
+scan_valid_snr_threshold=7
+scan_valid_rssi_threshold=10
+```
+
+## Known Issues
+
+### M3ULCB Kingfisher
+
+Initial setup for a new Kingfisher board requires booting an image with
+Kingfisher support and running the commands:
+```
+si_init
+si_firmware_update
+```
+This installs the provided firmware into the flash attached to the Si4689.
+
+Since all operations are currently done by calling a patched version of
+Cogent Embedded's si_ctl utility, scanning currently cannot be interrupted.
+Additionally, sometimes a failure in scanning seems to result in muted
+state that currently has not been debugged.