| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is a NXP tuner AM/FM/RDS. The chip has analogue and digital sound
output and input. Chip is controlled through i2c.
I had to add a sound cart to the kernel to be able to capture the i2s
data from the chip.
Some of the verbs still to be implemented. I test it on a costum board
with imx6solo.
Bug-AGL SPEC-3071
Signed-off-by: VahidGharaee <vgharaee@gmail.com>
Change-Id: I868706e6d275aef77f77138f815b1b53d64780be
|
|
Add initial basic support for next/previous events from signal composer,
mapping them to seek forward/back. More work will be required to handle
the issues around both mediaplayer and radio both being running and
differentiating which should handle the events.
Additionally, complete transition to binding version 3 to clean things
up.
Bug-AGL: SPEC-3046
Change-Id: I251fa461c96dba584a3fe0069bab4fd2e54701ad
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Bug-AGL: SPEC-2745
Change-Id: I5ee9d3118a302f0edf5fe79a43590818d3d829c3
Signed-off-by: Li Xiaoming <lixm.fnst@cn.fujitsu.com>
|
|
Bug-AGL: SPEC-2473
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Change-Id: I320be57ce48a63c7e85b8daebf7b094423f580f9
|
|
The actual code does not need to change for the moment.
GStreamer alsasink will redirect the stream to pipewire.
Bug-AGL: SPEC-2473
Change-Id: Ibd791cc8fc4ec8f2c7ddaba82aac1de143856324
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
|
|
The build needs libusb-1.0. Everything foes right when building
for Yocto, that already and likely has the needed things.
Issue seen when building for a linux host.
The missing check did not point out the need for libusb-1.0-devel
Change-Id: I7440e2d9ca21232d11e5cabafc79b383092e8890
Signed-off-by: Thierry Bultel <thierry.bultel@iot.bzh>
|
|
Setting AFB_BINDING_VERSION is cmake makes merges
easier between branches, since it is always defined
once at a single place instead that in each file
that need it.
Also removed the "INSTALL" section with LIBRARY_DESTINATION
since it is now treated in app-templates.
Change-Id: I7ef5f3b4d2009ab6ec296ac70bfc0a5647f9534c
Signed-off-by: Thierry Bultel <thierry.bultel@iot.bzh>
|
|
When building for 4A, switch to new gstreamer-based ALSA output for
the RTL-SDR backend, and the Kingfisher backend now uses a gstreamer
pipeline for its loopback to either an ALSA or Pulse sink depending
on 4A or not. Using gstreamer instead of direct ALSA output has the
benefit of transparently handling resampling to the M3ULCB hardware's
required 48 KHz sample rate for the RTL-SDR backend.
Change-Id: I2bfbf924927bb461cce88b04aba0e626f8d71215
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
To avoid the GPL licensed code in rtl_fm.c making all of the binding
GPL, rework things to wrap it with a simple standalone helper
executable that is driven via stdin/stdout. While this could
potentially be done by running the original unmodified rtl_fm utility
itself, it would be impossible to implement scanning with that
approach without some compromising of playback latency and quality.
The current helper implementation is simple enough that replacing it
with an alternate one should be relatively straightforward if that is
desired.
Change-Id: If83b834da3999f5807d1453524ae72b1c3559c90
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Make Kingfisher support unconditional to move all platform
detection to run-time. This fixes the issue of violating the
application build workflow with the SDK. Additionally, the
Kingfisher detection has been improved with an added check
for the Si4689 device-tree node to differentiate from a
regular M3ULCB, and the Kingfisher output has been fixed for
recent BSP changes.
Change-Id: I28e18a065385205aefec974079b0a9c2d31059b6
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Add conditionally compilable support for the Si4689 radio on the
M3ULCB Kingfisher infotainment board. The codebase has been
refactored to allow multiple radio implementations, and when
Kingfisher support is enabled, the binding will first look for a
USB RTL-SDR adapter, then fallback to the Kingfisher Si4689 if
one is not found. This allows easily switching to a RTL-SDR
adapter if this initial Kingfisher support encounters issues.
The back end implementation relies on a patched version of the
"si_ctl" utility from Cogent Embedded's Kingfisher BSP changes.
The modifications to it add FM band plan selection and scanning
threshold tweaking for poor radio environments. Audio output is
achieved by looping the radio's PulseAudio source to the
appropriate sink depending on 4A or non-4A operation. For 4A
compatibility, the PulseAudio source is created if it does not
exist, which currently is the case due to PulseAudio's udev
module being disabled when 4A is enabled.
Additionally, the FM band plan for Japan has been corrected to go
to 95 MHz, and a README.md file has been added documenting the
optional configuration that can be done via /etc/xdg/AGL.conf for
band plan selection and scanning sensitivity.
Change-Id: I204906fed741d917fc3b8be962deadb4e59989db
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
Switch from qmake build system to cmake avoiding the unneeded
dependency of qt
Bug-AGL: SPEC-834
Change-Id: Ifcf43b8ebadf723ec0131beda7d96f705083a1c2
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
VahidGharaee
Scott Murray
Li Xiaoming
George Kiagiadakis
Thierry Bultel
Scott Murray
Harunobu Kurokawa
Matt Ranostay