Age | Commit message (Collapse) | Author | Files | Lines |
|
Check if PipeWire is corking the audio stream and if so don't
process signal-composer events till uncorked
Bug-AGL: SPEC-3023
Change-Id: I1a4623022bbe28658bc97b5fe0cda58863f20d8c
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Add initial basic support for next/previous events from signal composer,
mapping them to seek forward/back. More work will be required to handle
the issues around both mediaplayer and radio both being running and
differentiating which should handle the events.
Additionally, complete transition to binding version 3 to clean things
up.
Bug-AGL: SPEC-3046
Change-Id: I251fa461c96dba584a3fe0069bab4fd2e54701ad
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Bug-AGL: SPEC-2745
Change-Id: I5ee9d3118a302f0edf5fe79a43590818d3d829c3
Signed-off-by: Li Xiaoming <lixm.fnst@cn.fujitsu.com>
|
|
Bug-AGL: SPEC-2473
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Change-Id: I320be57ce48a63c7e85b8daebf7b094423f580f9
|
|
The non-4A codepaths were totally broken here
Bug-AGL: SPEC-2473
Change-Id: I1c3c49688566684455bf9522f68f506eaf6aa6c3
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
|
|
Add a status event to indicate playing versus stopped state, this
allows users to detect when the binding has been stopped by another
user.
Change-Id: I4c1256427f0113b535e12a2dbc121d45c93dc0dd
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
(cherry picked from commit a2fdf6e139207e7b0e0270c8a167c6a30c8fe61d)
|
|
Rework things so that the 4A audio role is only opened while playing,
and closed when stopped. Further work will need to be done to handle
the possibility of the output device changing on subsequent opens,
both the RTL SDR and Kingfisher case have complications around doing
so:
- The RTL SDR helper application needs to be enhanced to add an
output setting command. Killing it and starting it again would
also work, but likely will add noticeable UI latency.
- On the Kingfisher, the binding currently has no control over the
output used for the loopback, as it is being set up down in the
soft-mixer based on HAL values.
Change-Id: I4aa83c937972ec5d91f7b78421a11148c7fe0afc
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
(cherry picked from commit f1d5902c92eafd3aad62e29298502603a9b56d81)
|
|
Changed the api call for getting an audio role.
Mapped the stop/start operations to mute/unmute
actions on role verb.
No longer uses a gstreamer pipeline for the sound
output, since it is 4a-softmixer that performs
the read/write loop instead.
Change-Id: I91e4f801a0da866c50b2218622e810d7350ab8a9
Signed-off-by: Thierry Bultel <thierry.bultel@iot.bzh>
|
|
Added a verb to retrieve the RDS information.
Notice that it is only supported on the kingfisher
implementation.
Change-Id: I0e2a830ff77154eb8cbb780bb599fb49f71a5b1c
Signed-off-by: Thierry Bultel <thierry.bultel@iot.bzh>
|
|
Setting AFB_BINDING_VERSION is cmake makes merges
easier between branches, since it is always defined
once at a single place instead that in each file
that need it.
Also removed the "INSTALL" section with LIBRARY_DESTINATION
since it is now treated in app-templates.
Change-Id: I7ef5f3b4d2009ab6ec296ac70bfc0a5647f9534c
Signed-off-by: Thierry Bultel <thierry.bultel@iot.bzh>
|
|
Fixed all the compilation warning that appeared
with the latest version of gcc.
There are still warnings in the gstreamer headers,
that would likely be fixed by a gstreamer bump.
Change-Id: I3ae7698dbff47303be366d9755a643a013bb4e51
Signed-off-by: Thierry Bultel <thierry.bultel@iot.bzh>
|
|
When building for 4A, switch to new gstreamer-based ALSA output for
the RTL-SDR backend, and the Kingfisher backend now uses a gstreamer
pipeline for its loopback to either an ALSA or Pulse sink depending
on 4A or not. Using gstreamer instead of direct ALSA output has the
benefit of transparently handling resampling to the M3ULCB hardware's
required 48 KHz sample rate for the RTL-SDR backend.
Change-Id: I2bfbf924927bb461cce88b04aba0e626f8d71215
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Make Kingfisher support unconditional to move all platform
detection to run-time. This fixes the issue of violating the
application build workflow with the SDK. Additionally, the
Kingfisher detection has been improved with an added check
for the Si4689 device-tree node to differentiate from a
regular M3ULCB, and the Kingfisher output has been fixed for
recent BSP changes.
Change-Id: I28e18a065385205aefec974079b0a9c2d31059b6
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Change-Id: Ic5130850f76db94d86fb94e904ac5f985cf0aa30
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
Add conditionally compilable support for the Si4689 radio on the
M3ULCB Kingfisher infotainment board. The codebase has been
refactored to allow multiple radio implementations, and when
Kingfisher support is enabled, the binding will first look for a
USB RTL-SDR adapter, then fallback to the Kingfisher Si4689 if
one is not found. This allows easily switching to a RTL-SDR
adapter if this initial Kingfisher support encounters issues.
The back end implementation relies on a patched version of the
"si_ctl" utility from Cogent Embedded's Kingfisher BSP changes.
The modifications to it add FM band plan selection and scanning
threshold tweaking for poor radio environments. Audio output is
achieved by looping the radio's PulseAudio source to the
appropriate sink depending on 4A or non-4A operation. For 4A
compatibility, the PulseAudio source is created if it does not
exist, which currently is the case due to PulseAudio's udev
module being disabled when 4A is enabled.
Additionally, the FM band plan for Japan has been corrected to go
to 95 MHz, and a README.md file has been added documenting the
optional configuration that can be done via /etc/xdg/AGL.conf for
band plan selection and scanning sensitivity.
Change-Id: I204906fed741d917fc3b8be962deadb4e59989db
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
The returned value was presumed to be garbage.
Change-Id: I72997d267139cc89f5dd5d325fc0512f44859b90
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
Recent testing found that the verbs no longer work now with the
AFB_SESSION_CHECK flag set on them and the binding split out to be
standalone from the app. Since the radio does not really need the
concept of a session, switch to AFB_SESSION_NONE to get things
working, rather than add the extra infrastructure to enable session
support.
Change-Id: I9c022eaf7a18a1094b9afb7c6bddf1a8ebc9e875
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Update structures and function calls to afm binding framework
version 2 specs
Bug-AGL: SPEC-835
Change-Id: Ie9198c4fe035e2267a1098fac7995b60e65809ec
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Radio binding is now standalone so the qmake build scripts need
to be updated to reflect that
Bug-AGL: SPEC-832
Change-Id: Iab9cd5d18536e416d22d91c492ef489159a62d0d
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|