summaryrefslogtreecommitdiffstats
path: root/binding/radio_impl_rtlsdr.c
AgeCommit message (Collapse)AuthorFilesLines
2019-12-02Migration to binding V3icefish_8.99.2icefish/8.99.28.99.2Li Xiaoming1-8/+8
Bug-AGL: SPEC-2745 Change-Id: I5ee9d3118a302f0edf5fe79a43590818d3d829c3 Signed-off-by: Li Xiaoming <lixm.fnst@cn.fujitsu.com>
2019-06-04rtlsdr: improve rtlsdr_set_output to handle NULL as the output stringGeorge Kiagiadakis1-3/+2
Bug-AGL: SPEC-2473 Change-Id: I89f754bd83687159c3aecb3074cba4fcf16c7d37 Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
2019-01-04Add audio role open/close supportScott Murray1-20/+56
Rework things so that the 4A audio role is only opened while playing, and closed when stopped. Further work will need to be done to handle the possibility of the output device changing on subsequent opens, both the RTL SDR and Kingfisher case have complications around doing so: - The RTL SDR helper application needs to be enhanced to add an output setting command. Killing it and starting it again would also work, but likely will add noticeable UI latency. - On the Kingfisher, the binding currently has no control over the output used for the loopback, as it is being set up down in the soft-mixer based on HAL values. Change-Id: I4aa83c937972ec5d91f7b78421a11148c7fe0afc Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit f1d5902c92eafd3aad62e29298502603a9b56d81)
2018-07-17Set the binding version in cmake instead of sourceThierry Bultel1-1/+0
Setting AFB_BINDING_VERSION is cmake makes merges easier between branches, since it is always defined once at a single place instead that in each file that need it. Also removed the "INSTALL" section with LIBRARY_DESTINATION since it is now treated in app-templates. Change-Id: I7ef5f3b4d2009ab6ec296ac70bfc0a5647f9534c Signed-off-by: Thierry Bultel <thierry.bultel@iot.bzh>
2018-07-17radio_impl_rtldsr: use macros for hardcoded sizesThierry Bultel1-32/+46
and fixes some complication warnings Change-Id: I3e9031eb215c3331ffb2264afad5ff07fca2bb46 Signed-off-by: Thierry Bultel <thierry.bultel@iot.bzh>
2018-07-17Fixed compilation warningsThierry Bultel1-4/+3
Fixed all the compilation warning that appeared with the latest version of gcc. There are still warnings in the gstreamer headers, that would likely be fixed by a gstreamer bump. Change-Id: I3ae7698dbff47303be366d9755a643a013bb4e51 Signed-off-by: Thierry Bultel <thierry.bultel@iot.bzh>
2018-06-05Rework output to directly support 4Aflounder_5.99.1flounder/5.99.15.99.1Scott Murray1-1/+7
When building for 4A, switch to new gstreamer-based ALSA output for the RTL-SDR backend, and the Kingfisher backend now uses a gstreamer pipeline for its loopback to either an ALSA or Pulse sink depending on 4A or not. Using gstreamer instead of direct ALSA output has the benefit of transparently handling resampling to the M3ULCB hardware's required 48 KHz sample rate for the RTL-SDR backend. Change-Id: I2bfbf924927bb461cce88b04aba0e626f8d71215 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-06-05Split rtlsdr code into standalone helperScott Murray1-54/+216
To avoid the GPL licensed code in rtl_fm.c making all of the binding GPL, rework things to wrap it with a simple standalone helper executable that is driven via stdin/stdout. While this could potentially be done by running the original unmodified rtl_fm utility itself, it would be impossible to implement scanning with that approach without some compromising of playback latency and quality. The current helper implementation is simple enough that replacing it with an alternate one should be relatively straightforward if that is desired. Change-Id: If83b834da3999f5807d1453524ae72b1c3559c90 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-03-20Add Kingfisher Si4689 supportHarunobu Kurokawa1-27/+48
Add conditionally compilable support for the Si4689 radio on the M3ULCB Kingfisher infotainment board. The codebase has been refactored to allow multiple radio implementations, and when Kingfisher support is enabled, the binding will first look for a USB RTL-SDR adapter, then fallback to the Kingfisher Si4689 if one is not found. This allows easily switching to a RTL-SDR adapter if this initial Kingfisher support encounters issues. The back end implementation relies on a patched version of the "si_ctl" utility from Cogent Embedded's Kingfisher BSP changes. The modifications to it add FM band plan selection and scanning threshold tweaking for poor radio environments. Audio output is achieved by looping the radio's PulseAudio source to the appropriate sink depending on 4A or non-4A operation. For 4A compatibility, the PulseAudio source is created if it does not exist, which currently is the case due to PulseAudio's udev module being disabled when 4A is enabled. Additionally, the FM band plan for Japan has been corrected to go to 95 MHz, and a README.md file has been added documenting the optional configuration that can be done via /etc/xdg/AGL.conf for band plan selection and scanning sensitivity. Change-Id: I204906fed741d917fc3b8be962deadb4e59989db Signed-off-by: Scott Murray <scott.murray@konsulko.com> Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2017-08-17binding: radio: update build system for standalone bindingMatt Ranostay1-0/+254
Radio binding is now standalone so the qmake build scripts need to be updated to reflect that Bug-AGL: SPEC-832 Change-Id: Iab9cd5d18536e416d22d91c492ef489159a62d0d Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>