diff options
Diffstat (limited to 'ucs2-lib/inc/ucs_gpio_pb.h')
| -rw-r--r-- | ucs2-lib/inc/ucs_gpio_pb.h | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/ucs2-lib/inc/ucs_gpio_pb.h b/ucs2-lib/inc/ucs_gpio_pb.h new file mode 100644 index 0000000..c098243 --- /dev/null +++ b/ucs2-lib/inc/ucs_gpio_pb.h @@ -0,0 +1,143 @@ +/*------------------------------------------------------------------------------------------------*/ +/* UNICENS V2.1.0-3491 */ +/* Copyright (c) 2017 Microchip Technology Germany II GmbH & Co. KG. */ +/* */ +/* This program is free software: you can redistribute it and/or modify */ +/* it under the terms of the GNU General Public License as published by */ +/* the Free Software Foundation, either version 2 of the License, or */ +/* (at your option) any later version. */ +/* */ +/* This program is distributed in the hope that it will be useful, */ +/* but WITHOUT ANY WARRANTY; without even the implied warranty of */ +/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */ +/* GNU General Public License for more details. */ +/* */ +/* You should have received a copy of the GNU General Public License */ +/* along with this program. If not, see <http://www.gnu.org/licenses/>. */ +/* */ +/* You may also obtain this software under a propriety license from Microchip. */ +/* Please contact Microchip for further information. */ +/*------------------------------------------------------------------------------------------------*/ + +/*! + * \file + * \brief Public header file of the Gpio module. + * \addtogroup G_UCS_GPIO_TYPES + * @{ + */ + +#ifndef UCS_GPIO_PB_H +#define UCS_GPIO_PB_H + +#ifdef __cplusplus +extern "C" +{ +#endif + +/*------------------------------------------------------------------------------------------------*/ +/* Enumerators */ +/*------------------------------------------------------------------------------------------------*/ +/*! \brief Result codes of the GPIO Module. */ +typedef enum Ucs_Gpio_ResultCode_ +{ + UCS_GPIO_RES_SUCCESS = 0x00U, /*!< \brief GPIO command succeeded */ + UCS_GPIO_RES_ERR_CMD = 0x01U, /*!< \brief GPIO command failed due to an INIC function-specific error or a transmission error on the MOST network. + * \details The \em result_type section in Ucs_Gpio_ResultDetails_t will provide you with more detailed information concerning the error type. + */ + UCS_GPIO_RES_ERR_SYNC = 0x02U /*!< \brief Remote synchronization of target device failed. + * \details The \em inic_result section in Ucs_Gpio_ResultDetails_t will provide you with more detailed information concerning this error code. + */ +} Ucs_Gpio_ResultCode_t; + +/*! \brief This enumerator specifies the kind of result - Target or Transmission. */ +typedef enum Ucs_Gpio_ResultType_ +{ + UCS_GPIO_RESULT_TYPE_TGT = 0x00U, /*!< \brief Specifies the target results, typically INIC function-specific error from target device. */ + UCS_GPIO_RESULT_TYPE_TX = 0x01U /*!< \brief Specifies the transmission error information that occurred on the MOST network. */ + +} Ucs_Gpio_ResultType_t; + +/*------------------------------------------------------------------------------------------------*/ +/* Structures */ +/*------------------------------------------------------------------------------------------------*/ +/*! \brief Detailed information used for GPIO results. */ +typedef struct Ucs_Gpio_ResultDetails_ +{ + /*! \brief Specifies the type of the current asynchronous result. + * \details The following briefly describes the different types of results available: + * - \b UCS_GPIO_RESULT_TYPE_TGT: target results, typically INIC function-specific error found on target device. \n Refer to \em inic_result to get the detailed information. + * - \b UCS_GPIO_RESULT_TYPE_TX: transmission results, typically transmission error on the MOST network. \n Refer to \em tx_result to get the transmission information. + */ + Ucs_Gpio_ResultType_t result_type; + /*! \brief Holds the status of the transmission. */ + Ucs_MsgTxStatus_t tx_result; + /*! \brief Holds the results of the target device. */ + Ucs_StdResult_t inic_result; + +} Ucs_Gpio_ResultDetails_t; + +/*! \brief Result structure of the GPIO Module. */ +typedef struct Ucs_Gpio_Result_ +{ + /*! \brief Result code. */ + Ucs_Gpio_ResultCode_t code; + /*! \brief Detailed information on the returned result. */ + Ucs_Gpio_ResultDetails_t details; + +} Ucs_Gpio_Result_t; + +/*------------------------------------------------------------------------------------------------*/ +/* Type definitions */ +/*------------------------------------------------------------------------------------------------*/ +/*! \brief Function signature of result callback used by Ucs_Gpio_CreatePort() + * \param node_address The node address of the device from where the results come + * \param gpio_port_handle The port resource handle. + * \param result The operation result + * \param user_ptr User reference provided in \ref Ucs_InitData_t "Ucs_InitData_t::user_ptr" + */ +typedef void (*Ucs_Gpio_CreatePortResCb_t)(uint16_t node_address, uint16_t gpio_port_handle, Ucs_Gpio_Result_t result, void *user_ptr); + +/*! \brief Function signature of result callback used by Ucs_Gpio_SetPinMode() and Ucs_Gpio_GetPinMode(). + * \param node_address The node address of the device from where the results come + * \param gpio_port_handle The port resource handle. + * \param pin The pin that has been configured. + * \param mode The mode of the GPIO pin. + * \param result The operation result + * \param user_ptr User reference provided in \ref Ucs_InitData_t "Ucs_InitData_t::user_ptr" + */ +typedef void (*Ucs_Gpio_ConfigPinModeResCb_t)(uint16_t node_address, uint16_t gpio_port_handle, Ucs_Gpio_PinConfiguration_t pin_cfg_list[], uint8_t list_sz, Ucs_Gpio_Result_t result, void *user_ptr); + +/*! \brief Function signature of result callback used by Ucs_Gpio_WritePort() and Ucs_Gpio_ReadPort(). + * \param node_address The node address of the device from where the results come + * \param gpio_port_handle The port resource handle. + * \param current_state The current state of the GPIO pin + * \param sticky_state The sticky state of all GPIO pins configured as sticky inputs. + * \param result The operation result + * \param user_ptr User reference provided in \ref Ucs_InitData_t "Ucs_InitData_t::user_ptr" + */ +typedef void (*Ucs_Gpio_PinStateResCb_t)(uint16_t node_address, uint16_t gpio_port_handle, uint16_t current_state, uint16_t sticky_state, Ucs_Gpio_Result_t result, void *user_ptr); + +/*! \brief Function signature of result callback used by Gpio_TriggerEvents() + * \param node_address The node address of the device from where the results come + * \param gpio_port_handle The port resource handle. + * \param rising_edges The GPIO pins on which a rising-edge trigger condition was detected + * \param falling_edges The GPIO pins on which a falling-edge trigger condition was detected + * \param levels The GPIO pins on which a logic level condition was detected + * \param user_ptr User reference provided in \ref Ucs_InitData_t "Ucs_InitData_t::user_ptr" + */ +typedef void (*Ucs_Gpio_TriggerEventResultCb_t)(uint16_t node_address, uint16_t gpio_port_handle, uint16_t rising_edges, uint16_t falling_edges, uint16_t levels, void *user_ptr); + +#ifdef __cplusplus +} /* extern "C" */ +#endif + +#endif /* #ifndef UCS_GPIO_PB_H */ + +/*! + * @} + */ + +/*------------------------------------------------------------------------------------------------*/ +/* End of file */ +/*------------------------------------------------------------------------------------------------*/ + |