diff options
Diffstat (limited to 'protocol/ivi-controller.xml')
| -rw-r--r-- | protocol/ivi-controller.xml | 603 |
1 files changed, 0 insertions, 603 deletions
diff --git a/protocol/ivi-controller.xml b/protocol/ivi-controller.xml deleted file mode 100644 index 521d625..0000000 --- a/protocol/ivi-controller.xml +++ /dev/null @@ -1,603 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<protocol name="ivi_controller"> - - <copyright> - Copyright (C) 2013 DENSO CORPORATION - Copyright (c) 2013 BMW Car IT GmbH - - Permission is hereby granted, free of charge, to any person obtaining a copy - of this software and associated documentation files (the "Software"), to deal - in the Software without restriction, including without limitation the rights - to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - copies of the Software, and to permit persons to whom the Software is - furnished to do so, subject to the following conditions: - - The above copyright notice and this permission notice shall be included in - all copies or substantial portions of the Software. - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - THE SOFTWARE. - </copyright> - - <interface name="ivi_controller_surface" version="1"> - <description summary="controller interface to surface in ivi compositor"/> - - <request name="set_visibility"> - <description summary="set the visibility of a surface in ivi compositor"> - If visibility argument is 0, the surface in the ivi compositor is set to invisible. - If visibility argument is not 0, the surface in the ivi compositor is set to visible. - </description> - <arg name="visibility" type="uint"/> - </request> - - <request name="set_opacity"> - <description summary="set the opacity of a surface in ivi compositor"> - The valid range for opacity is 0.0 (fully transparent) to 1.0 (fully opaque). - </description> - <arg name="opacity" type="fixed"/> - </request> - - <request name="set_source_rectangle"> - <description summary="set the scanout area of a surface in ivi compositor"> - The source rectangle defines the part of the surface content, that is used for - compositing the surface. It can be used, if valid content of the surface is smaller - than the surface. Effectively it can be used to zoom the content of the surface. - x: horizontal start position of scanout area within the surface - y: vertical start position of scanout area within the surface - width: width of scanout area within the surface - height: height of scanout area within the surface - </description> - <arg name="x" type="int"/> - <arg name="y" type="int"/> - <arg name="width" type="int"/> - <arg name="height" type="int"/> - </request> - - <request name="set_destination_rectangle"> - <description summary="Set the destination area of a surface within a layer"> - The destination rectangle defines the position and size of a surface on a layer. - The surface will be scaled to this rectangle for rendering. - x: horizontal start position of surface within the layer - y: vertical start position of surface within the layer - width : width of surface within the layer - height: height of surface within the layer - </description> - <arg name="x" type="int"/> - <arg name="y" type="int"/> - <arg name="width" type="int"/> - <arg name="height" type="int"/> - </request> - - <request name="set_configuration"> - <description summary="request new buffer size for application content"> - Request the client providing content for this surface, to resize of the buffers - provided as surface content. - </description> - <arg name="width" type="int"/> - <arg name="height" type="int"/> - </request> - - <request name="set_orientation"> - <description summary="set the orientation of a surface in ivi compositor"> - The orientation of a surface in ivi compositor can be rotated in 90 degree steps, - as defined in orientation enum. - </description> - <arg name="orientation" type="int"/> - </request> - - <request name="screenshot"> - <description summary="take screenshot of surface"> - Store a screenshot of the surface content in the file provided by argument filename. - </description> - <arg name="filename" type="string"/> - </request> - - <event name="visibility"> - <description summary="the visibility of the surface in ivi compositor has changed"> - The new visibility state is provided in argument visibility. - If visibility is 0, the surface has become invisible. - If visibility is not 0, the surface has become visible. - </description> - <arg name="visibility" type="int"/> - </event> - - <event name="opacity"> - <description summary="the opacity of surface in ivi compositor has changed"> - The new opacity state is provided in argument opacity. - The valid range for opactiy is 0.0 (fully transparent) to 1.0 (fully opaque). - </description> - <arg name="opacity" type="fixed"/> - </event> - - <event name="source_rectangle"> - <description summary="the source rectangle of surface in ivi compositor has changed"> - The scanout region of the surface content has changed. - The new values for source rectangle are provided by - x: new horizontal start position of scanout area within the surface - y: new vertical start position of scanout area within the surface - width: new width of scanout area within the surface - height: new height of scanout area within the surface - </description> - <arg name="x" type="int"/> - <arg name="y" type="int"/> - <arg name="width" type="int"/> - <arg name="height" type="int"/> - </event> - - <event name="destination_rectangle"> - <description summary="the destination rectangle of surface in ivi compositor has changed"> - The new values for source rectangle are provided by - x: new horizontal start position of surface within the layer - y: new vertical start position of surface within the layer - width : new width of surface within the layer - height: new height of surface within the layer - </description> - <arg name="x" type="int"/> - <arg name="y" type="int"/> - <arg name="width" type="int"/> - <arg name="height" type="int"/> - </event> - - <event name="configuration"> - <description summary="the configuration of surface in ivi compositor has changed"> - The client providing content for this surface was requested to resize the buffer - provided as surface content. The requested buffer size is provided by arguments - width and height. - </description> - <arg name="width" type="int"/> - <arg name="height" type="int"/> - </event> - - <enum name="orientation"> - <description summary="orientation presets in degrees"> - The surfaces in ivi controller can be rotated in 90 degrees steps. - This enum defines all valid orientations for surfaces. - </description> - <entry name="0_degrees" value="0" summary="not rotated"/> - <entry name="90_degrees" value="1" summary="rotated 90 degrees clockwise"/> - <entry name="180_degrees" value="2" summary="rotated 180 degrees clockwise"/> - <entry name="270_degrees" value="3" summary="rotated 270 degrees clockwise"/> - </enum> - - <event name="orientation"> - <description summary="the orientation of surface in ivi compositor has changed"> - The new orientation status is provided by argument orientation. - </description> - <arg name="orientation" type="int"/> - </event> - - <enum name="pixelformat"> - <description summary="pixel format values"> - Applications can provide buffers as surface content with differernt buffer - properties. This enum defines all supported buffer configurations. - </description> - <entry name="r_8" value="0" summary="8 bit luminance surface"/> - <entry name="rgb_888" value="1" summary="24 bit rgb surface"/> - <entry name="rgba_8888" value="2" summary="24 bit rgb surface with 8 bit alpha"/> - <entry name="rgb_565" value="3" summary="16 bit rgb surface"/> - <entry name="rgba_5551" value="4" summary="16 bit rgb surface with binary mask"/> - <entry name="rgba_6661" value="5" summary="18 bit rgb surface with binary mask"/> - <entry name="rgba_4444" value="6" summary="12 bit rgb surface with 4 bit alpha"/> - <entry name="unknown" value="7" summary="unknown"/> - </enum> - - <event name="pixelformat"> - <description summary="pixelformat for surface in ivi compositor has changed"> - When client attach buffers as surface content, these buffers have a pixelformat - configuration. If the pixelformat of a newly attached buffer is different from - the previous buffer configuration, this event is raised. - This is also done, when the first buffer is provided by application. - </description> - <arg name="pixelformat" type="int"/> - </event> - - <event name="layer"> - <description summary="surface in ivi compositor was added to a layer"> - This surface was added to the render order of the layer defined by argument layer. - This is essential for a surface to become visible on screen, since ivi compositors - will only render layers (or more precise all surfaces in the render order of a layer). - </description> - <arg name="layer" type="object" interface="ivi_controller_layer" allow-null="true"/> - </event> - - <request name="send_stats"> - <description summary="request statistics for surface in ivi compositor"> - These stats contain information required for monitoring, debugging, logging - and tracing. - </description> - </request> - - <event name="stats"> - <description summary="receive updated statistics for surface in ivi compositor"> - The information contained in this event is essential for monitoring, debugging, - logging and tracing support in IVI systems. - </description> - <arg name="redraw_count" type="uint"/> - <arg name="frame_count" type="uint"/> - <arg name="update_count" type="uint"/> - <arg name="pid" type="uint"/> - <arg name="process_name" type="string" allow-null="true"/> - </event> - - <request name="destroy" type="destructor"> - <description summary="destroy ivi_controller_surface"> - Request to destroy the ivi_controller_surface. If argument - destroy_scene_object id not 0, the surface will be destroyed in - ivi compositor. If argument is 0, only the proxy object is destroyed. - </description> - <arg name="destroy_scene_object" type="int"/> - </request> - - <event name="destroyed"> - <description summary="ivi_controller_surface was destroyed"/> - </event> - - <enum name="content_state"> - <description summary="all possible states of content for a surface"> - This enum defines all possible content states of a surface. This is - required, since surfaces in ivi compositor can exist without applications - providing content for them. - </description> - <entry name="content_available" value="1" - summary="application provided wl_surface for this surface"/> - <entry name="content_removed" value="2" - summary="wl_surface was removed for this surface"/> - </enum> - - <event name="content"> - <description summary="content state for surface has changed"> - Surfaces in ivi compositor can exist without any application or controller - referencing it. All surfaces initially have no content. This event indicates - when content state has changed. All possible content states are defined - in enum content_state. - </description> - <arg name="content_state" type="int"/> - </event> - - </interface> - - <interface name="ivi_controller_layer" version="1"> - <description summary="controller interface to layer in ivi compositor"/> - - <request name="set_visibility"> - <description summary="set visibility of layer in ivi compositor"> - If visibility argument is 0, the layer in the ivi compositor is set to invisible. - If visibility argument is not 0, the layer in the ivi compositor is set to visible. - </description> - <arg name="visibility" type="uint"/> - </request> - - <request name="set_opacity"> - <description summary="set opacity of layer in ivi compositor"> - The valid range for opacity is 0.0 (fully transparent) to 1.0 (fully opaque). - </description> - <arg name="opacity" type="fixed"/> - </request> - - <request name="set_source_rectangle"> - <description summary="set the scanout area of a layer in ivi compositor"> - The source rectangle defines the part of the layer content, that is used for - compositing the screen. It can be used, if valid content of the layer is smaller - than the layer. Effectively it can be used to zoom the content of the layer. - x: horizontal start position of scanout area within the layer - y: vertical start position of scanout area within the layer - width: width of scanout area within the layer - height: height of scanout area within the layer - </description> - <arg name="x" type="int"/> - <arg name="y" type="int"/> - <arg name="width" type="int"/> - <arg name="height" type="int"/> - </request> - - <request name="set_destination_rectangle"> - <description summary="Set the destination area of a layer within a screen"> - The destination rectangle defines the position and size of a layer on a screen. - The layer will be scaled to this rectangle for rendering. - x: horizontal start position of layer within the screen - y: vertical start position of layer within the screen - width : width of surface within the screen - height: height of surface within the screen - </description> - <arg name="x" type="int"/> - <arg name="y" type="int"/> - <arg name="width" type="int"/> - <arg name="height" type="int"/> - </request> - - <request name="set_configuration"> - <description summary="request new size for layer"> - Layers are created with an initial size, but they can be resized at runtime. - This request changes the widht and height of a layer. - </description> - <arg name="width" type="int"/> - <arg name="height" type="int"/> - </request> - - <request name="set_orientation"> - <description summary="set the orientation of a layer in ivi compositor"> - The orientation of a layer in ivi compositor can be rotated in 90 degree steps, - as defined in orientation enum. - </description> - <arg name="orientation" type="int"/> - </request> - - <request name="screenshot"> - <description summary="take screenshot of layer"> - Store a screenshot of the layer content in the file provided by argument filename. - </description> - <arg name="filename" type="string"/> - </request> - - <request name="clear_surfaces"> - <description summary="remove all surfaces from layer render order"> - A layer has no content assigned to itself, it is a container for surfaces. - This request removes all surfaces from the layer render order. - Note: the surfaces are not destroyed, they are just no longer contained by - the layer. - </description> - </request> - - <request name="add_surface"> - <description summary="add a surface to layer render order at nearest z-position"> - A layer has no content assigned to itself, it is a container for surfaces. - This request adds a surface to the topmost position of the layer render order. - The added surface will cover all other surfaces of the layer. - </description> - <arg name="surface" type="object" interface="ivi_controller_surface"/> - </request> - - <request name="remove_surface"> - <description summary="remove a surface from layer render order"> - A layer has no content assigned to itself, it is a container for surfaces. - This request removes one surfaces from the layer render order. - Note: the surface is not destroyed, it is just no longer contained by - the layer. - </description> - <arg name="surface" type="object" interface="ivi_controller_surface"/> - </request> - - <request name="set_render_order"> - <description summary="set render order of layer"> - A layer has no content assigned to itself, it is a container for surfaces. - This request removes all surfaces from the layer render order and set a - completely new render order. - </description> - <arg name="id_surfaces" type="array"/> - </request> - - <event name="visibility"> - <description summary="the visibility of the layer in ivi compositor has changed"> - The new visibility state is provided in argument visibility. - If visibility is 0, the layer has become invisible. - If visibility is not 0, the layer has become visible. - </description> - <arg name="visibility" type="int"/> - </event> - - <event name="opacity"> - <description summary="the opacity of layer in ivi compositor has changed"> - The new opacity state is provided in argument opacity. - The valid range for opactiy is 0.0 (fully transparent) to 1.0 (fully opaque). - </description> - <arg name="opacity" type="fixed"/> - </event> - - <event name="source_rectangle"> - <description summary="the source rectangle of layer in ivi compositor has changed"> - The scanout region of the layer content has changed. - The new values for source rectangle are provided by - x: new horizontal start position of scanout area within the layer - y: new vertical start position of scanout area within the layer - width: new width of scanout area within the layer - height: new height of scanout area within the layer - </description> - <arg name="x" type="int"/> - <arg name="y" type="int"/> - <arg name="width" type="int"/> - <arg name="height" type="int"/> - </event> - - <event name="destination_rectangle"> - <description summary="the destination rectangle of layer in ivi compositor has changed"> - The new values for source rectangle are provided by - x: new horizontal start position of layer within the screen - y: new vertical start position of layer within the screen - width : new width of layer within the screen - height: new height of layer within the screen - </description> - <arg name="x" type="int"/> - <arg name="y" type="int"/> - <arg name="width" type="int"/> - <arg name="height" type="int"/> - </event> - - <event name="configuration"> - <description summary="the configuration of layer in ivi compositor has changed"> - The layer was resized. The new layer size is provided by arguments - width and height. - </description> - <arg name="width" type="int"/> - <arg name="height" type="int"/> - </event> - - <event name="orientation"> - <description summary="the orientation of layer in ivi compositor has changed"> - The new orientation status is provided by argument orientation. - </description> - <arg name="orientation" type="int"/> - </event> - - <event name="screen"> - <description summary="layer in ivi compositor was added to a screen"> - This layer was added to the render order of the screen defined by argument screen. - This is essential for a layer to become visible on screen, since ivi compositors - will only render screens (or more precise all layers in the render order of a screen). - </description> - <arg name="screen" type="object" interface="wl_output" allow-null="true"/> - </event> - - <request name="destroy" type="destructor"> - <description summary="destroy ivi_controller_layer"> - Request to destroy the ivi_controller_layer. If argument - destroy_scene_object id not 0, the layer will be destroyed in - ivi compositor. If argument is 0, only the proxy object is destroyed. - </description> - <arg name="destroy_scene_object" type="int"/> - </request> - - <event name="destroyed"> - <description summary="destroyed layer event"/> - </event> - - </interface> - - <interface name="ivi_controller_screen" version="1"> - <description summary="controller interface to screen in ivi compositor"/> - - <request name="destroy" type="destructor"> - <description summary="destroy ivi_controller_screen"/> - </request> - - <request name="clear"> - <description summary="remove all layers from screen render order"> - A screen has no content assigned to itself, it is a container for layers. - This request removes all layers from the screen render order. - Note: the layers are not destroyed, they are just no longer contained by - the screen. - </description> - </request> - - <request name="add_layer"> - <description summary="add a layer to screen render order at nearest z-position"> - A screen has no content assigned to itself, it is a container for layers. - This request adds a layers to the topmost position of the screen render order. - The added layer will cover all other layers of the screen. - </description> - <arg name="layer" type="object" interface="ivi_controller_layer"/> - </request> - - <request name="screenshot"> - <description summary="take screenshot of screen"> - Store a screenshot of the screen content in the file provided by argument filename. - </description> - <arg name="filename" type="string"/> - </request> - - <request name="set_render_order"> - <description summary="set render order of screen"> - A screen has no content assigned to itself, it is a container for layers. - This request removes all layers from the screen render order and set a - completely new render order. - </description> - <arg name="id_layers" type="array"/> - </request> - - </interface> - - <interface name="ivi_controller" version="1"> - <description summary="interface for ivi controllers to use ivi compositor features"/> - - <request name="commit_changes"> - <description summary="commit all changes requested by client"> - All requests are not applied directly to scene object, so a controller - can set different properties and apply the changes all at once. - Note: there's an exception to this. Creation and destruction of - scene objects is executed immediately. - </description> - </request> - - <event name="screen"> - <description summary="new screen is available"> - A new screen is announced to the controller. This is typically - the case in two cases: - 1. controller was just started, ivi compositor announces existing screen - 2. a new screen was added to the system at runtime - </description> - <arg name="id_screen" type="uint"/> - <arg name="screen" type="new_id" interface="ivi_controller_screen"/> - </event> - - <request name="layer_create"> - <description summary="create layer in ivi compositor"> - layer_create will create a new layer with id_layer in ivi compositor, - if it does not yet exists. If the layer with id_layer already exists in - ivi compositor, a handle to the existing layer is returned and width and - height properties are ignored. - </description> - <arg name="id_layer" type="uint"/> - <arg name="width" type="int"/> - <arg name="height" type="int"/> - <arg name="id" type="new_id" interface="ivi_controller_layer"/> - </request> - - <event name="layer"> - <description summary="new layer is available"> - A new layer is announced to the controller. - </description> - <arg name="id_layer" type="uint"/> - </event> - - <request name="surface_create"> - <description summary="create surface in ivi compositor"> - surface_create will create a new surface with id_surface in ivi compositor, - if it does not yet exists. If the surface with id_surface already exists in - ivi compositor, a handle to the existing surface is returned. - </description> - <arg name="id_surface" type="uint"/> - <arg name="id" type="new_id" interface="ivi_controller_surface"/> - </request> - - <event name="surface"> - <description summary="new surface is available"> - A new surface is announced to the controller. - </description> - <arg name="id_surface" type="uint"/> - </event> - - <enum name="object_type"> - <description summary="available object types in ivi compositor scene"> - This enum defines all scene object available in ivi compositor. - </description> - <entry name="surface" value="1" summary="surface object type"/> - <entry name="layer" value="2" summary="layer object type"/> - <entry name="screen" value="3" summary="screen object type"/> - </enum> - - <enum name="error_code"> - <description summary="possible error codes returned in error event"> - These error codes define all possible error codes returned by ivi compositor - on server-side errors. - </description> - <entry name="unknown_error" value="1" summary="unknown error encountered"/> - <entry name="file_error" value="2" summary="file i/o error encountered"/> - </enum> - - <event name="error"> - <description summary="server-side error detected"> - The ivi compositor encountered error while processing a request by this - controller. The error is defined by argument error_code and optional - error_text. Additionally the object type and id is contained in the error - event to provide some detailes to handle the error. - If the controller requires to associate this error event to a request, - it can - 1. send request - 2. force display roundtrip - 3. check, if error event was received - but this restricts the controller to have only one open request at a time. - </description> - <arg name="object_id" type="int"/> - <arg name="object_type" type="int"/> - <arg name="error_code" type="int"/> - <arg name="error_text" type="string" allow-null="true"/> - </event> - - </interface> - -</protocol> - |