aboutsummaryrefslogtreecommitdiffstats
path: root/docs/WriteYourTests/Reference
diff options
context:
space:
mode:
Diffstat (limited to 'docs/WriteYourTests/Reference')
-rw-r--r--docs/WriteYourTests/Reference/0_BindingTestFunctions.md100
-rw-r--r--docs/WriteYourTests/Reference/1_BindingAssertFunctions.md64
-rw-r--r--docs/WriteYourTests/Reference/2_TestFrameworkFunctions.md59
-rw-r--r--docs/WriteYourTests/Reference/Introduction.md10
-rw-r--r--docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/0_GeneralAssertions.md32
-rw-r--r--docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/1_ValueAssertions.md58
-rw-r--r--docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/2_ScientificAssertions.md48
-rw-r--r--docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/3_StringAssertions.md38
-rw-r--r--docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/4_ErrorAssertions.md30
-rw-r--r--docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/5_TypeAssertions.md38
-rw-r--r--docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/6_TableAssertions.md19
-rw-r--r--docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/Introduction.md13
12 files changed, 0 insertions, 509 deletions
diff --git a/docs/WriteYourTests/Reference/0_BindingTestFunctions.md b/docs/WriteYourTests/Reference/0_BindingTestFunctions.md
deleted file mode 100644
index 8da86da..0000000
--- a/docs/WriteYourTests/Reference/0_BindingTestFunctions.md
+++ /dev/null
@@ -1,100 +0,0 @@
-# Binding Test functions
-
-* **_AFT.testVerbStatusSuccess(testName, api, verb, args, setUp, tearDown)**
-
- Simply test that the call of a verb successfully returns.
-
- *setUp* and *tearDown* are functions that can be added to your context,
- it works just like **_AFT.beforeEach()** and **_AFT.afterEach()**,
- *setUp* will be ran before your *testFunction* and **_AFT.beforeEach()**
- (if set) functions, *tearDown* will be ran after your *testFunction* and
- **_AFT.afterEach()** (if set) functions.
-
-* **_AFT.testVerbStatusError(testName, api, verb, args, setUp, tearDown)**
-
- The inverse than above.
-
- *setUp* and *tearDown* are functions that can be added to your context,
- it works just like **_AFT.beforeEach()** and **_AFT.afterEach()**,
- *setUp* will be ran before your *testFunction* and **_AFT.beforeEach()**
- (if set) functions, *tearDown* will be ran after your *testFunction* and
- **_AFT.afterEach()** (if set) functions.
-
-* **_AFT.testVerbResponseEquals(testName, api, verb, args, expectedResponse, setUp, tearDown)**
-
- Test that the call of a verb successfully returns and that verb's response
- is equals to the *expectedResponse*.
-
- *setUp* and *tearDown* are functions that can be added to your context,
- it works just like **_AFT.beforeEach()** and **_AFT.afterEach()**, *setUp*
- will be ran before your *testFunction* and **_AFT.beforeEach()** (if set)
- functions, *tearDown* will be ran after your *testFunction* and
- **_AFT.afterEach()** (if set) functions.
-
-* **_AFT.testVerbResponseEqualsError(testName, api, verb, args, expectedResponse, setUp, tearDown)**
-
- The inverse than above.
-
- *setUp* and *tearDown* are functions that can be added to your context, it works
- just like **_AFT.beforeEach()** and **_AFT.afterEach()**, *setUp* will be ran
- before your *testFunction* and **_AFT.beforeEach()** (if set) functions,
- *tearDown* will be ran after your *testFunction* and **_AFT.afterEach()** (if
- set) functions.
-
-* **_AFT.testVerbCb(testName, api, verb, args, expectedResponse, callback, setUp, tearDown)**
-
- Test the call of a verb with a custom callback. From this callback you
- will need to make some assertions on what you need (verb JSON return object
- content mainly).
-
- If you don't need to test the response simply specify an empty LUA table.
-
- *setUp* and *tearDown* are functions that can be added to your context, it works
- just like **_AFT.beforeEach()** and **_AFT.afterEach()**, *setUp* will be ran
- before your *testFunction* and **_AFT.beforeEach()** (if set) functions,
- *tearDown* will be ran after your *testFunction* and **_AFT.afterEach()** (if
- set) functions.
-
-* **_AFT.testVerbCbError(testName, api, verb, args, expectedResponse, callback, setUp, tearDown)**
-
- Should return success on failure.
-
- *setUp* and *tearDown* are functions that can be added to your context, it works
- just like **_AFT.beforeEach()** and **_AFT.afterEach()**, *setUp* will be ran
- before your *testFunction* and **_AFT.beforeEach()** (if set) functions,
- *tearDown* will be ran after your *testFunction* and **_AFT.afterEach()** (if
- set) functions.
-
-* **_AFT.testEvtReceived(testName, eventName, timeout, setUp, tearDown)**
-
- Prior to be able to check that an event has been received, you have to
- register the event with the test framework using **_AFT.addEventToMonitor**
- function.
-
- Check if an event has been correctly received in time (timeout in µs). An event
- name use the application framework naming scheme: **api/event_name**.
-
-* **_AFT.testEvtNotReceived(testName, eventName, timeout, setUp, tearDown)**
-
- Prior to be able to check that an event has not been received, you have to
- register the event with the test framework using **_AFT.addEventToMonitor**
- function.
-
- Check if an event has not been correctly received in time (timeout in µs). An
- event name use the application framework naming scheme: **api/event_name**.
-
-* **_AFT.testGrpEvtReceived(testName, eventGrp, timeout, setUp, tearDown)**
-
- Prior to be able to check that a group of event (a table of event) has been
- received, you have to register the event with the test framework using
- **_AFT.addEventToMonitor** function.
-
- The table has to have this format:
- ```lua
- eventGrp = {["api/event_name_1"]=1,["api/event_name_2"]=2,["api/event_name_3"]=5}
- ```
- As you can see, in the table, event names are table keys and the value stored are
- the number of time that the events have to be received.
-
- Check if events has been correctly received in time (timeout in µs). An
- event name use the application framework naming scheme: **api/event_name**. \ No newline at end of file
diff --git a/docs/WriteYourTests/Reference/1_BindingAssertFunctions.md b/docs/WriteYourTests/Reference/1_BindingAssertFunctions.md
deleted file mode 100644
index 918bd04..0000000
--- a/docs/WriteYourTests/Reference/1_BindingAssertFunctions.md
+++ /dev/null
@@ -1,64 +0,0 @@
-# Binding Assert functions
-
-* **_AFT.assertVerbStatusSuccess(api, verb, args)**
-
- Simply test that the call of a verb successfully returns.
-
-* **_AFT.assertVerbStatusError(api, verb, args)**
-
- The inverse than above.
-
-* **_AFT.assertVerbResponseEquals(api, verb, args, expectedResponse)**
-
- Test that the call of a verb successfully returns and that verb's response
- is equals to the *expectedResponse*.
-
-* **_AFT.assertVerbResponseEqualsError(api, verb, args, expectedResponse)**
-
- The inverse than above.
-
-* **_AFT.assertVerbCb(api, verb, args, expectedResponse, callback)**
-
- Test the call of a verb with a custom callback. From this callback you
- will need to make some assertions on what you need (verb JSON return object
- content mainly).
-
- If you don't need to test the response simply specify an empty LUA table.
-
-* **_AFT.assertVerbCbError(api, verb, args, expectedResponse, callback)**
-
- Should return success on failure.
-
-* **_AFT.assertEvtReceived(eventName, timeout)**
-
- Prior to be able to check that an event has been received, you have to
- register the event with the test framework using **_AFT.addEventToMonitor**
- function.
-
- Check if an event has been correctly received in time (timeout in µs).
- An event name use the application framework naming scheme: **api/event_name**.
-
-* **_AFT.assertEvtNotReceived(eventName, timeout)**
-
- Prior to be able to check that an event has been received, you have to
- register the event with the test framework using **_AFT.addEventToMonitor**
- function.
-
- Check if an event has been correctly received in time (timeout in µs).
- An event name use the application framework naming scheme: **api/event_name**.
-
-* **_AFT.assertGrpEvtReceived(eventGrp, timeout)**
-
- Prior to be able to check that a group of event (a table of event) has been
- received, you have to register the event with the test framework using
- **_AFT.addEventToMonitor** function.
-
- The table has to have this format:
- ```lua
- eventGrp = {["api/event_name_1"]=1,["api/event_name_2"]=2,["api/event_name_3"]=5}
- ```
- As you can see, in the table, event names are table keys and the value stored are
- the number of time that the events have to be received.
-
- Check if events has been correctly received in time (timeout in µs).
- An event name use the application framework naming scheme: **api/event_name**. \ No newline at end of file
diff --git a/docs/WriteYourTests/Reference/2_TestFrameworkFunctions.md b/docs/WriteYourTests/Reference/2_TestFrameworkFunctions.md
deleted file mode 100644
index 20184ec..0000000
--- a/docs/WriteYourTests/Reference/2_TestFrameworkFunctions.md
+++ /dev/null
@@ -1,59 +0,0 @@
-# Test Framework functions
-
-* **_AFT.addEventToMonitor(eventName, callback)**
-
- Add a binding event in the test framework to be able to assert its reception
- . You'll need to add as much as events you expect to receive. You could also
- specify a callback to test deeper that the event is as you want to. The
- callback will happens after the assertion that it has been received so you
- can work on data that the event eventually carry.
-
-* **_AFT.setJunitFile(filePath)**
-
- Set the *JUnit* file path. When *JUnit* is set as the output type for the
- test framework.
-
-* **_AFT.setBeforeEach(function)**
-
- Set the **_AFT.beforeEach()** function which is used to run the *function*
- before each tests.
-
-* **_AFT.setAfterEach(function)**
-
- Set the **_AFT.afterEach()** function which is used to run the *function*
- after each tests.
-
-* **_AFT.setBeforeAll(function)**
-
- Set the **_AFT.beforeAll()** function which is used to run the *function*
- before all tests. If the given function is successful it has to return 0
- else it will return an error.
-
-* **_AFT.setAfterAll(function)**
-
- Set the **_AFT.afterAll()** function which is used to run the *function*
- after all tests. If the given function is successful it has to return 0
- else it will return an error.
-
-* **_AFT.describe(testName, testFunction, setUp, tearDown)**
-
- Give a context to a custom test. *testFunction* will be given the name
- provided by *testName* and will be tested.
-
- *setUp* and *tearDown* are functions that can be added to your context,
- it works just like **_AFT.beforeEach()** and **_AFT.afterEach()**,
- *setUp* will be ran before your *testFunction* and **_AFT.beforeEach()**
- (if set) functions, *tearDown* will be ran after your *testFunction* and
- **_AFT.afterEach()** (if set) functions.
-
-* **_AFT.setBefore(testName, beforeTestFunction)**
- Set a function to be ran at the beginning of the given *testName* function.
-
- ```lua
- _AFT.testVerbStatusSuccess('testPingSuccess','hello', 'ping', {})
- _AFT.setBefore("testPingSuccess",function() print("~~~~~ Begin testPingSuccess ~~~~~") end)
- _AFT.setAfter("testPingSuccess",function() print("~~~~~ End testPingSuccess ~~~~~") end)
- ```
-
-* **_AFT.setBefore(testName, beforeTestFunction)**
- Set a function to be ran at the end of the given *testName* function. \ No newline at end of file
diff --git a/docs/WriteYourTests/Reference/Introduction.md b/docs/WriteYourTests/Reference/Introduction.md
deleted file mode 100644
index 8de5a15..0000000
--- a/docs/WriteYourTests/Reference/Introduction.md
+++ /dev/null
@@ -1,10 +0,0 @@
-# References
-
-Follow this section to know which functions are available !!
-
-Section's Table of content :
-
-* [Binding test functions](0_BindingTestFunctions.html)
-* [Binding assert functions](1_BindingAssertFunctions.html)
-* [Test framework functions](2_TestFrameworkFunctions.html)
-* [LUAUnit assertion functions](LuaUnitAssertionFunctions/Introduction.html) \ No newline at end of file
diff --git a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/0_GeneralAssertions.md b/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/0_GeneralAssertions.md
deleted file mode 100644
index 4a719b6..0000000
--- a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/0_GeneralAssertions.md
+++ /dev/null
@@ -1,32 +0,0 @@
-# General Assertions
-
-* **_AFT.assertEquals(actual, expected)**
-
- Assert that two values are equal.
-
- For tables, the comparison is a deep comparison :
-
- * number of elements must be the same
- * tables must contain the same keys
- * each key must contain the same values. The values are also compared recursively with deep comparison.
-
- LuaUnit provides other table-related assertions, see [Table assertions](http://luaunit.readthedocs.io/en/luaunit_v3_2_1/#assert-table)
-
-* **_AFT.assertNotEquals(actual, expected)**
-
- Assert that two values are different. The assertion fails if the two values are identical.
-
- It also uses table deep comparison.
-
-* **_AFT.assertAlmostEquals(actual, expected, margin)**
-
- Assert that two floating point numbers are almost equal.
-
- When comparing floating point numbers, strict equality does not work.
- Computer arithmetic is so that an operation that mathematically yields
- 1.00000000 might yield 0.999999999999 in lua . That’s why you need an
- almost equals comparison, where you specify the error margin.
-
-* **_AFT.assertNotAlmostEquals(actual, expected, margin)**
-
- Assert that two floating point numbers are not almost equal. \ No newline at end of file
diff --git a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/1_ValueAssertions.md b/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/1_ValueAssertions.md
deleted file mode 100644
index ed927cd..0000000
--- a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/1_ValueAssertions.md
+++ /dev/null
@@ -1,58 +0,0 @@
-# Value assertions
-
-* **_AFT.assertEvalToTrue(value)**
-
- Assert that a given value evals to true. Lua coercion rules are applied so
- that values like 0,"",1.17 succeed in this assertion. If provided, extra_msg
- is a string which will be printed along with the failure message.
-
-* **_AFT.assertEvalToFalse(Value)**
-
- Assert that a given value eval to *false*. Lua coercion rules are applied so
- that *nil* and *false* succeed in this assertion. If provided, extra_msg is a
- string which will be printed along with the failure message.
-
-* **_AFT.assertIsTrue(value)**
-
- Assert that a given value compares to true. Lua coercion rules are applied so
- that values like 0, "", 1.17 all compare to true.
-
-* **_AFT.assertIsFalse(value)**
-
- Assert that a given value compares to false. Lua coercion rules are applied so
- that only nil and false all compare to false.
-
-* **_AFT.assertIsNil(value)**
-
- Assert that a given value is nil .
-
-* **_AFT.assertNotIsNil(value)**
-
- Assert that a given value is not *nil* . Lua coercion rules are applied
- so that values like ``0``, ``""``, ``false`` all validate the assertion.
- If provided, *extra_msg* is a string which will be printed along with the
- failure message.
-
-* **_AFT.assertIs(actual, expected)**
-
- Assert that two variables are identical. For string, numbers, boolean and
- for nil, this gives the same result as assertEquals() . For the other types,
- identity means that the two variables refer to the same object.
-
- Example :
-
- ```lua
- `s1='toto'
- s2='to'..'to'
- t1={1,2}
- t2={1,2}
- luaunit.assertIs(s1,s1) -- ok
- luaunit.assertIs(s1,s2) -- ok
- luaunit.assertIs(t1,t1) -- ok
- luaunit.assertIs(t1,t2) -- fail`
- ```
-
-* **_AFT.assertNotIs(actual, expected)**
-
- Assert that two variables are not identical, in the sense that they do not
- refer to the same value. See assertIs() for more details. \ No newline at end of file
diff --git a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/2_ScientificAssertions.md b/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/2_ScientificAssertions.md
deleted file mode 100644
index 9f80a7a..0000000
--- a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/2_ScientificAssertions.md
+++ /dev/null
@@ -1,48 +0,0 @@
-# Scientific assertions
-
->**Note**
->If you need to deal with value minus zero, be very careful because Lua versions
-are inconsistent on how they treat the >syntax -0 : it creates either a plus
-zero or a minus zero. Multiplying or dividing 0 by -1 also yields inconsistent >
-results. The reliable way to create the -0 value is : minusZero = -1 / (1/0).
-
-* **_AFT.assertIsNaN(value)**
- Assert that a given number is a *NaN* (Not a Number), according to the
- definition of IEEE-754_ . If provided, *extra_msg* is a string which will
- be printed along with the failure message.
-
-* **_AFT.assertIsPlusInf(value)**
-
- Assert that a given number is *plus infinity*, according to the definition of
- IEEE-754_. If provided, *extra_msg* is a string which will be printed along
- with the failure message.
-
-* **_AFT.assertIsMinusInf(value)**
-
- Assert that a given number is *minus infinity*, according to the definition of
- IEEE-754_. If provided, *extra_msg* is a string which will be printed along
- with the failure message.
-
-* **_AFT.assertIsInf(value)**
-
- Assert that a given number is *infinity* (either positive or negative),
- according to the definition of IEEE-754_. If provided, *extra_msg* is a string
- which will be printed along with the failure message.
-
-* **_AFT.assertIsPlusZero(value)**
-
- Assert that a given number is *+0*, according to the definition of IEEE-754_.
- The verification is done by dividing by the provided number and verifying
- that it yields *infinity* . If provided, *extra_msg* is a string which will
- be printed along with the failure message.
-
- Be careful when dealing with *+0* and *-0*, see note above
-
-* **_AFT.assertIsMinusZero(value)**
-
- Assert that a given number is *-0*, according to the definition of IEEE-754_.
- The verification is done by dividing by the provided number and verifying that
- it yields *minus infinity* . If provided, *extra_msg* is a string which will
- be printed along with the failure message.
-
- Be careful when dealing with *+0* and *-0* \ No newline at end of file
diff --git a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/3_StringAssertions.md b/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/3_StringAssertions.md
deleted file mode 100644
index a816998..0000000
--- a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/3_StringAssertions.md
+++ /dev/null
@@ -1,38 +0,0 @@
-# String assertions
-
-Assertions related to string and patterns.
-
-* **_AFT.assertStrContains(str, sub[, useRe])**
-
- Assert that a string contains the given substring or pattern.
-
- By default, substring is searched in the string. If useRe is provided and is
- true, sub is treated as a pattern which is searched inside the string str.
-
-* **_AFT.assertStrIContains(str, sub)**
-
- Assert that a string contains the given substring, irrespective of the case.
-
- Not that unlike assertStrcontains(), you can not search for a pattern.
-
-* **_AFT.assertNotStrContains(str, sub, useRe)**
-
- Assert that a string does not contain a given substring or pattern.
-
- By default, substring is searched in the string. If useRe is provided and is
- true, sub is treated as a pattern which is searched inside the string str.
-
-* **_AFT.assertNotStrIContains(str, sub)**
-
- Assert that a string does not contain the given substring, irrespective of
- the case.
-
- Not that unlike assertNotStrcontains(), you can not search for a pattern.
-
-* **_AFT.assertStrMatches(str, pattern[, start[, final]])**
-
- Assert that a string matches the full pattern pattern.
-
- If start and final are not provided or are nil, the pattern must match the
- full string, from start to end. The functions allows to specify the expected
- start and end position of the pattern in the string. \ No newline at end of file
diff --git a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/4_ErrorAssertions.md b/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/4_ErrorAssertions.md
deleted file mode 100644
index 482b98d..0000000
--- a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/4_ErrorAssertions.md
+++ /dev/null
@@ -1,30 +0,0 @@
-# Error assertions
-
-Error related assertions, to verify error generation and error messages.
-
-* **_AFT.assertError(func, ...)**
-
- Assert that calling functions func with the arguments yields an error. If the function does not yield an error, the assertion fails.
-
- Note that the error message itself is not checked, which means that this function does not distinguish between the legitimate error that you expect and another error that might be triggered by mistake.
-
- The next functions provide a better approach to error testing, by checking explicitly the error message content.
-
->**Note**
->When testing LuaUnit, switching from assertError() to assertErrorMsgEquals() revealed quite a few bugs!
-
-* **_AFT.assertErrorMsgEquals(expectedMsg, func, ...)**
-
- Assert that calling function func will generate exactly the given error message. If the function does not yield an error, or if the error message is not identical, the assertion fails.
-
- Be careful when using this function that error messages usually contain the file name and line number information of where the error was generated. This is usually inconvenient. To ignore the filename and line number information, you can either use a pattern with assertErrorMsgMatches() or simply check if the message contains a string with assertErrorMsgContains() .
-
-* **_AFT.assertErrorMsgContains(partialMsg, func, ...)**
-
- Assert that calling function func will generate an error message containing partialMsg . If the function does not yield an error, or if the expected message is not contained in the error message, the assertion fails.
-
-* **_AFT.assertErrorMsgMatches(expectedPattern, func, ...)**
-
- Assert that calling function func will generate an error message matching expectedPattern . If the function does not yield an error, or if the error message does not match the provided pattern the assertion fails.
-
- Note that matching is done from the start to the end of the error message. Be sure to escape magic all magic characters with % (like -+.?\*) . \ No newline at end of file
diff --git a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/5_TypeAssertions.md b/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/5_TypeAssertions.md
deleted file mode 100644
index 843f651..0000000
--- a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/5_TypeAssertions.md
+++ /dev/null
@@ -1,38 +0,0 @@
-# Type assertions
-
-The following functions all perform type checking on their argument. If the
-received value is not of the right type, the failure message will contain the
-expected type, the received type and the received value to help you identify
-better the problem.
-
-* **_AFT.assertIsNumber(value)**
-
- Assert that the argument is a number (integer or float)
-
-* **_AFT.assertIsString(value)**
-
- Assert that the argument is a string.
-
-* **_AFT.assertIsTable(value)**
-
- Assert that the argument is a table.
-
-* **_AFT.assertIsBoolean(value)**
-
- Assert that the argument is a boolean.
-
-* **_AFT.assertIsFunction(value)**
-
- Assert that the argument is a function.
-
-* **_AFT.assertIsUserdata(value)**
-
- Assert that the argument is a userdata.
-
-* **_AFT.assertIsThread(value)**
-
- Assert that the argument is a coroutine (an object with type thread ).
-
-* **_AFT.assertNotIsThread(value)**
-
- Assert that the argument is a not coroutine (an object with type thread ). \ No newline at end of file
diff --git a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/6_TableAssertions.md b/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/6_TableAssertions.md
deleted file mode 100644
index 8d29988..0000000
--- a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/6_TableAssertions.md
+++ /dev/null
@@ -1,19 +0,0 @@
-# Table assertions
-
-* **_AFT.assertItemsEquals(actual, expected)**
-
- Assert that two tables contain the same items, irrespective of their keys.
-
- This function is practical for example if you want to compare two lists but
- where items are not in the same order:
-
- ```lua
- luaunit.assertItemsEquals( {1,2,3}, {3,2,1} ) -- assertion succeeds
- ```
- The comparison is not recursive on the items: if any of the items are tables,
- they are compared using table equality (like as in assertEquals() ), where the
- key matters.
-
- ```lua
- luaunit.assertItemsEquals( {1,{2,3},4}, {4,{3,2,},1} ) -- assertion fails because {2,3} ~= {3,2}
- ``` \ No newline at end of file
diff --git a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/Introduction.md b/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/Introduction.md
deleted file mode 100644
index 2bdf05c..0000000
--- a/docs/WriteYourTests/Reference/LuaUnitAssertionFunctions/Introduction.md
+++ /dev/null
@@ -1,13 +0,0 @@
-# LuaUnit Assertion Functions
-
-Follow this section to know which luaUnit assertion functions are available !!
-
-Section's Table of content :
-
-* [General Assertions](0_GeneralAssertions.html)
-* [Value Assertions](1_ValueAssertions.html)
-* [Scientific Assertions](2_ScientificAssertions.html)
-* [String Assertions](3_StringAssertions.html)
-* [Error Assertions](4_ErrorAssertions.html)
-* [Type Assertions](5_TypeAssertions.html)
-* [Table Assertions](6_TableAssertions.html) \ No newline at end of file