diff options
Diffstat (limited to 'autobuild')
-rwxr-xr-x | autobuild/agl/autobuild | 116 | ||||
-rw-r--r-- | autobuild/linux/autobuild | 124 |
2 files changed, 129 insertions, 111 deletions
diff --git a/autobuild/agl/autobuild b/autobuild/agl/autobuild index e659a2f..bbbc13e 100755 --- a/autobuild/agl/autobuild +++ b/autobuild/agl/autobuild @@ -1,5 +1,6 @@ #!/usr/bin/make -f # Copyright (C) 2015 - 2018 "IoT.bzh" +# Copyright (C) 2020 Konsulko Group # Author "Romain Forlot" <romain.forlot@iot.bzh> # # Licensed under the Apache License, Version 2.0 (the "License"); @@ -15,86 +16,95 @@ # limitations under the License. THISFILE := $(lastword $(MAKEFILE_LIST)) -BUILD_DIR := $(abspath $(dir $(THISFILE))/../../build) -BUILD_DIR_TEST := $(abspath $(dir $(THISFILE))/../../build-test) -BUILD_DIR_DEBUG := $(abspath $(dir $(THISFILE))/../../build-debug) -BUILD_DIR_COVERAGE := $(abspath $(dir $(THISFILE))/../../build-coverage) -DEST := ${BUILD_DIR} - -.PHONY: all clean distclean configure build package help configure-debug configure-coverage build-debug build-coverage package-test package-debug package-coverage package-debug package-all - -all: help +ROOT_DIR := $(abspath $(dir $(THISFILE))/../..) + +# Build directories +# Note that the debug directory is defined in relation to the release +# directory (BUILD_DIR), this needs to be kept in mind if over-riding +# it and building that widget types, the specific widget type variable +# (e.g. BUILD_DIR_DEBUG) may also need to be specified to yield the +# desired output hierarchy. +BUILD_DIR = $(ROOT_DIR)/build +BUILD_DIR_DEBUG = $(abspath $(BUILD_DIR)/../build-debug) + +# Output directory variable for use in pattern rules. +# This is intended for internal use only, hence the explicit override +# definition. +override OUTPUT_DIR = $(BUILD_DIR) + +# Final install directory for widgets +DEST = $(OUTPUT_DIR) + +# Default build type for release builds +BUILD_TYPE = release + +.PHONY: all help update install distclean +.PHONY: clean clean-release clean-debug clean-all +.PHONY: configure configure-release configure-debug +.PHONY: build build-release build-debug build-all +.PHONY: package package-release package-debug package-all help: @echo "List of targets available:" @echo "" @echo "- all" + @echo "- help" @echo "- clean" @echo "- distclean" @echo "- configure" @echo "- build: compilation, link and prepare files for package into a widget" @echo "- package: output a widget file '*.wgt'" - @echo "- install: install in your INSTALL_ROOT directory" + @echo "- install: install in $(DEST) directory" @echo "" @echo "Usage: ./autobuild/agl/autobuild package DEST=${HOME}/opt" @echo "Don't use your build dir as DEST as wgt file is generated at this location" -clean: - @([ -d ${BUILD_DIR} ] && make -C ${BUILD_DIR} ${CLEAN_ARGS} clean) || echo Nothing to clean +all: package-all -distclean: - @[ -d ${DEST} ] && find ${DEST} -name "*.wgt" -delete - @([ -d ${BUILD_DIR} ] && make -C ${BUILD_DIR} distclean) || echo Nothing to distclean +# Target specific variable over-rides so static pattern rules can be +# used for the various type-specific targets. -configure: - @[ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR} - @[ -f ${BUILD_DIR}/Makefile ] || (cd ${BUILD_DIR} && qmake ${CONFIGURE_ARGS} ..) +configure-debug build-debug package-debug clean-debug: OUTPUT_DIR = $(BUILD_DIR_DEBUG) +configure-debug build-debug package-debug: BUILD_TYPE = debug -configure-test: - @[ -d ${BUILD_DIR_TEST} ] || mkdir -p ${BUILD_DIR_TEST} - @[ -f ${BUILD_DIR_TEST}/Makefile ] || (cd ${BUILD_DIR_TEST} && qmake ${CONFIGURE_ARGS} ..) +clean-release clean-debug: + @if [ -d $(OUTPUT_DIR) ]; then \ + $(MAKE) -C $(OUTPUT_DIR) $(CLEAN_ARGS) clean; \ + else \ + echo Nothing to clean; \ + fi -configure-debug: - @[ -d ${BUILD_DIR_DEBUG} ] || mkdir -p ${BUILD_DIR_DEBUG} - @[ -f ${BUILD_DIR_DEBUG}/Makefile ] || (cd ${BUILD_DIR_DEBUG} && qmake ${CONFIGURE_ARGS} ..) +clean: clean-release -configure-coverage: - @[ -d ${BUILD_DIR_COVERAGE} ] || mkdir -p ${BUILD_DIR_COVERAGE} - @[ -f ${BUILD_DIR_COVERAGE}/Makefile ] || (cd ${BUILD_DIR_COVERAGE} && qmake ${CONFIGURE_ARGS} ..) +clean-all: clean-release clean-debug -build: configure - @make -C ${BUILD_DIR} ${BUILD_ARGS} all +distclean: clean-all -build-test: configure-test - @make -C ${BUILD_DIR_TEST} ${BUILD_ARGS} all +configure-release configure-debug: + @mkdir -p $(OUTPUT_DIR) + @if [ ! -f $(OUTPUT_DIR)/Makefile ]; then \ + (cd $(OUTPUT_DIR) && qmake CONFIG+=$(BUILD_TYPE) $(CONFIGURE_ARGS) $(ROOT_DIR)); \ + fi -build-debug: configure-debug - @make -C ${BUILD_DIR_DEBUG} ${BUILD_ARGS} all +configure: configure-release -build-coverage: configure-coverage - @make -C ${BUILD_DIR_COVERAGE} ${BUILD_ARGS} all +build-release build-debug: build-%: configure-% + @$(MAKE) -C $(OUTPUT_DIR) $(BUILD_ARGS) all -install: build - @make -C ${BUILD_DIR} ${INSTALL_ARGS} install +build: build-release -package: build - @if [ "${DEST}" != "${BUILD_DIR}/$@" ]; then \ - mkdir -p ${DEST} && cp ${BUILD_DIR}/$@/*.wgt ${DEST}; \ - fi +build-all: build-release build-debug -package-test: build-test - @if [ "${DEST}" != "${BUILD_DIR_TEST}" ]; then \ - mkdir -p ${DEST} && cp ${BUILD_DIR_TEST}/package/*.wgt ${DEST}; \ +package-release package-debug: package-%: build-% + @cp $(OUTPUT_DIR)/package/*.wgt $(OUTPUT_DIR)/ + @if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \ + mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \ fi -package-debug: build-debug - @if [ "${DEST}" != "${BUILD_DIR_DEBUG}" ]; then \ - mkdir -p ${DEST} && cp ${BUILD_DIR_DEBUG}/package/*.wgt ${DEST}; \ - fi -package-coverage: build-coverage - @if [ "${DEST}" != "${BUILD_DIR_COVERAGE}" ]; then \ - mkdir -p ${DEST} && cp ${BUILD_DIR_COVERAGE}/package/*.wgt ${DEST}; \ - fi +package: package-release -package-all: package package-test package-coverage package-debug +package-all: package-release package-debug + +install: build + @$(MAKE) -C $(BUILD_DIR) $(INSTALL_ARGS) install diff --git a/autobuild/linux/autobuild b/autobuild/linux/autobuild index 04a8689..bbbc13e 100644 --- a/autobuild/linux/autobuild +++ b/autobuild/linux/autobuild @@ -1,12 +1,13 @@ #!/usr/bin/make -f # Copyright (C) 2015 - 2018 "IoT.bzh" +# Copyright (C) 2020 Konsulko Group # Author "Romain Forlot" <romain.forlot@iot.bzh> # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # -# http://www.apache.org/licenses/LICENSE-2.0 +# http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, @@ -15,88 +16,95 @@ # limitations under the License. THISFILE := $(lastword $(MAKEFILE_LIST)) -BUILD_DIR := $(abspath $(dir $(THISFILE))/../../build) -BUILD_DIR_TEST := $(abspath $(dir $(THISFILE))/../../build-test) -BUILD_DIR_DEBUG := $(abspath $(dir $(THISFILE))/../../build-debug) -BUILD_DIR_COVERAGE := $(abspath $(dir $(THISFILE))/../../build-coverage) -DEST := ${BUILD_DIR} - -.PHONY: all clean distclean configure build package help configure-debug configure-coverage build-debug build-coverage package-test package-debug package-coverage package-debug package-all - -all: help +ROOT_DIR := $(abspath $(dir $(THISFILE))/../..) + +# Build directories +# Note that the debug directory is defined in relation to the release +# directory (BUILD_DIR), this needs to be kept in mind if over-riding +# it and building that widget types, the specific widget type variable +# (e.g. BUILD_DIR_DEBUG) may also need to be specified to yield the +# desired output hierarchy. +BUILD_DIR = $(ROOT_DIR)/build +BUILD_DIR_DEBUG = $(abspath $(BUILD_DIR)/../build-debug) + +# Output directory variable for use in pattern rules. +# This is intended for internal use only, hence the explicit override +# definition. +override OUTPUT_DIR = $(BUILD_DIR) + +# Final install directory for widgets +DEST = $(OUTPUT_DIR) + +# Default build type for release builds +BUILD_TYPE = release + +.PHONY: all help update install distclean +.PHONY: clean clean-release clean-debug clean-all +.PHONY: configure configure-release configure-debug +.PHONY: build build-release build-debug build-all +.PHONY: package package-release package-debug package-all help: @echo "List of targets available:" @echo "" @echo "- all" + @echo "- help" @echo "- clean" @echo "- distclean" @echo "- configure" - @echo "- build: compilation, link and prepare files for package into a widget" + @echo "- build: compilation, link and prepare files for package into a widget" @echo "- package: output a widget file '*.wgt'" - @echo "- install: install in your defined DEST directory" + @echo "- install: install in $(DEST) directory" @echo "" @echo "Usage: ./autobuild/agl/autobuild package DEST=${HOME}/opt" - @echo "Don't use your build dir as DEST as wgt file is generated at this location" + @echo "Don't use your build dir as DEST as wgt file is generated at this location" - clean: - @([ -d ${BUILD_DIR} ] && make -C ${BUILD_DIR} ${CLEAN_ARGS} clean) || echo Nothing to clean +all: package-all -distclean: - @[ -d ${DEST} ] && find ${DEST} -name "*.wgt" -delete - @([ -d ${BUILD_DIR} ] && make -C ${BUILD_DIR} distclean) || echo Nothing to distclean +# Target specific variable over-rides so static pattern rules can be +# used for the various type-specific targets. -configure: - @[ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR} - @[ -f ${BUILD_DIR}/Makefile ] || (cd ${BUILD_DIR} && qmake ${CONFIGURE_ARGS} ..) +configure-debug build-debug package-debug clean-debug: OUTPUT_DIR = $(BUILD_DIR_DEBUG) +configure-debug build-debug package-debug: BUILD_TYPE = debug -configure-test: - @[ -d ${BUILD_DIR_TEST} ] || mkdir -p ${BUILD_DIR_TEST} - @[ -f ${BUILD_DIR_TEST}/Makefile ] || (cd ${BUILD_DIR_TEST} && qmake ${CONFIGURE_ARGS} ..) +clean-release clean-debug: + @if [ -d $(OUTPUT_DIR) ]; then \ + $(MAKE) -C $(OUTPUT_DIR) $(CLEAN_ARGS) clean; \ + else \ + echo Nothing to clean; \ + fi -configure-debug: - @[ -d ${BUILD_DIR_DEBUG} ] || mkdir -p ${BUILD_DIR_DEBUG} - @[ -f ${BUILD_DIR_DEBUG}/Makefile ] || (cd ${BUILD_DIR_DEBUG} && qmake ${CONFIGURE_ARGS} ..) +clean: clean-release -configure-coverage: - @[ -d ${BUILD_DIR_COVERAGE} ] || mkdir -p ${BUILD_DIR_COVERAGE} - @[ -f ${BUILD_DIR_COVERAGE}/Makefile ] || (cd ${BUILD_DIR_COVERAGE} && qmake ${CONFIGURE_ARGS} ..) +clean-all: clean-release clean-debug -build: configure - @make -C ${BUILD_DIR} ${BUILD_ARGS} all +distclean: clean-all -build-test: configure-test - @make -C ${BUILD_DIR_TEST} ${BUILD_ARGS} all +configure-release configure-debug: + @mkdir -p $(OUTPUT_DIR) + @if [ ! -f $(OUTPUT_DIR)/Makefile ]; then \ + (cd $(OUTPUT_DIR) && qmake CONFIG+=$(BUILD_TYPE) $(CONFIGURE_ARGS) $(ROOT_DIR)); \ + fi -build-debug: configure-debug - @make -C ${BUILD_DIR_DEBUG} ${BUILD_ARGS} all +configure: configure-release -build-coverage: configure-coverage - @make -C ${BUILD_DIR_COVERAGE} ${BUILD_ARGS} all +build-release build-debug: build-%: configure-% + @$(MAKE) -C $(OUTPUT_DIR) $(BUILD_ARGS) all -install: build - @if [ "${DEST}" != "${BUILD_DIR}" ]; then \ - mkdir -p ${DEST} && cp -rf ${BUILD_DIR}/package/root/* ${DEST}; \ - fi +build: build-release -package: build - @if [ "${DEST}" != "${BUILD_DIR}/$@" ]; then \ - mkdir -p ${DEST} && cp ${BUILD_DIR}/$@/*.wgt ${DEST}; \ - fi +build-all: build-release build-debug -package-test: build-test - @if [ "${DEST}" != "${BUILD_DIR_TEST}/$@" ]; then \ - mkdir -p ${DEST} && cp ${BUILD_DIR_TEST}/package/*.wgt ${DEST}; \ +package-release package-debug: package-%: build-% + @cp $(OUTPUT_DIR)/package/*.wgt $(OUTPUT_DIR)/ + @if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \ + mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \ fi -package-debug: build-debug - @if [ "${DEST}" != "${BUILD_DIR_DEBUG}/package" ]; then \ - mkdir -p ${DEST} && cp ${BUILD_DIR_DEBUG}/package/*.wgt ${DEST}; \ - fi -package-coverage: build-coverage - @if [ "${DEST}" != "${BUILD_DIR_COVERAGE}/package" ]; then \ - mkdir -p ${DEST} && cp ${BUILD_DIR_COVERAGE}/package/*.wgt ${DEST}; \ - fi +package: package-release -package-all: package package-test package-coverage package-debug +package-all: package-release package-debug + +install: build + @$(MAKE) -C $(BUILD_DIR) $(INSTALL_ARGS) install |