Change directory architecture to use 2 separated projects.

Each projects, binder and generator, has to be compiled separatly.
CAN-binder will host high and low level binding
CAN-config-generator only the generator used for low level binding.
build.sh script just launch both build in their respective dir.

Change-Id: Ic77932660fcca507b23a631d4e4e790f608880ae
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

1 files changed, 233 insertions, 0 deletions

diff --git a/CAN-binder/low-can-binding/can/can-decoder.cpp b/CAN-binder/low-can-binding/can/can-decoder.cpp
new file mode 100644
index 0000000..8843059
--- /dev/null
+++ b/CAN-binder/low-can-binding/can/can-decoder.cpp
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2015, 2016 "IoT.bzh"
+ * Author "Romain Forlot" <romain.forlot@iot.bzh>
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *	 http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "can-decoder.hpp"
+
+#include "canutil/read.h"
+#include "../utils/openxc-utils.hpp"
+
+/// @brief Parse the signal's bitfield from the given data and return the raw
+/// value.
+///
+/// @param[in] signal - The signal to parse from the data.
+/// @param[in] message - can_message_t to parse
+///
+/// @return Returns the raw value of the signal parsed as a bitfield from the given byte
+/// array.
+///
+float decoder_t::parseSignalBitfield(can_signal_t& signal, const can_message_t& message)
+{
+	 return bitfield_parse_float(message.get_data(), CAN_MESSAGE_SIZE,
+			signal.get_bit_position(), signal.get_bit_size(), signal.get_factor(),
+			signal.get_offset());
+}
+
+/// @brief Wrap a raw CAN signal value in a DynamicField without modification.
+///
+/// This is an implementation of the SignalDecoder type signature, and can be
+/// used directly in the can_signal_t.decoder field.
+///
+/// @param[in] signal - The details of the signal that contains the state mapping.
+/// @param[in] signals - The list of all signals
+/// @param[in] value - The numerical value that will be wrapped in a DynamicField.
+/// @param[out] send - An output argument that will be set to false if the value should
+///     not be sent for any reason.
+///
+/// @return Returns a DynamicField with the original, unmodified raw CAN signal value as
+/// its numeric value. The 'send' argument will not be modified as this decoder
+/// always succeeds.
+///
+openxc_DynamicField decoder_t::noopDecoder(can_signal_t& signal,
+		const std::vector<can_signal_t>& signals, float value, bool* send)
+{
+	openxc_DynamicField decoded_value = build_DynamicField(value);
+
+	return decoded_value;
+}
+/// @brief Coerces a numerical value to a boolean.
+///
+/// This is an implementation of the SignalDecoder type signature, and can be
+/// used directly in the can_signal_t.decoder field.
+///
+/// @param[in] signal  - The details of the signal that contains the state mapping.
+/// @param[in] signals - The list of all signals
+/// @param[in] value - The numerical value that will be converted to a boolean.
+/// @param[out] send - An output argument that will be set to false if the value should
+///     not be sent for any reason.
+///
+/// @return Returns a DynamicField with a boolean value of false if the raw signal value
+/// is 0.0, otherwise true. The 'send' argument will not be modified as this
+/// decoder always succeeds.
+///
+openxc_DynamicField decoder_t::booleanDecoder(can_signal_t& signal,
+		const std::vector<can_signal_t>& signals, float value, bool* send)
+{
+	openxc_DynamicField decoded_value = build_DynamicField(value == 0.0 ? false : true);
+
+	return decoded_value;
+}
+/// @brief Update the metadata for a signal and the newly received value.
+///
+/// This is an implementation of the SignalDecoder type signature, and can be
+/// used directly in the can_signal_t.decoder field.
+///
+/// This function always flips 'send' to false.
+///
+/// @param[in] signal  - The details of the signal that contains the state mapping.
+/// @param[in] signals - The list of all signals.
+/// @param[in] value - The numerical value that will be converted to a boolean.
+/// @param[out] send - This output argument will always be set to false, so the caller will
+///      know not to publish this value to the pipeline.
+///
+/// @return Return value is undefined.
+///
+openxc_DynamicField decoder_t::ignoreDecoder(can_signal_t& signal,
+		const std::vector<can_signal_t>& signals, float value, bool* send)
+{
+	if(send)
+	  *send = false;
+
+	openxc_DynamicField decoded_value;
+
+	return decoded_value;
+}
+
+/// @brief Find and return the corresponding string state for a CAN signal's
+/// raw integer value.
+///
+/// This is an implementation of the SignalDecoder type signature, and can be
+/// used directly in the can_signal_t.decoder field.
+///
+/// @param[in] signal  - The details of the signal that contains the state mapping.
+/// @param[in] signals - The list of all signals.
+/// @param[in] value - The numerical value that should map to a state.
+/// @param[out] send - An output argument that will be set to false if the value should
+///     not be sent for any reason.
+///
+/// @return Returns a DynamicField with a string value if a matching state is found in
+/// the signal. If an equivalent isn't found, send is sent to false and the
+/// return value is undefined.
+///
+openxc_DynamicField decoder_t::stateDecoder(can_signal_t& signal,
+		const std::vector<can_signal_t>& signals, float value, bool* send)
+{
+	const std::string signal_state = signal.get_states((uint8_t)value);
+	openxc_DynamicField decoded_value = build_DynamicField(signal_state);
+	if(signal_state.size() <= 0)
+	{
+		*send = false;
+		ERROR(binder_interface, "stateDecoder: No state found with index: %d", (int)value);
+	}
+	return decoded_value;
+}
+
+
+/// @brief Parse a signal from a CAN message, apply any required transforations
+///      to get a human readable value and public the result to the pipeline.
+///
+/// If the can_signal_t has a non-NULL 'decoder' field, the raw CAN signal value
+/// will be passed to the decoder before publishing.
+///
+/// @param[in] signal - The details of the signal to decode and forward.
+/// @param[in] message - The received CAN message that should contain this signal.
+/// @param[in] signals - an array of all active signals.
+///
+/// The decoder returns an openxc_DynamicField, which may contain a number,
+/// string or boolean.
+///
+openxc_DynamicField decoder_t::translateSignal(can_signal_t& signal, can_message_t& message,
+	const std::vector<can_signal_t>& signals)
+{
+	float value = decoder_t::parseSignalBitfield(signal, message);
+	DEBUG(binder_interface, "translateSignal: Decoded message from parseSignalBitfield: %f", value);
+
+	bool send = true;
+	// Must call the decoders every time, regardless of if we are going to
+	// decide to send the signal or not.
+	openxc_DynamicField decoded_value = decoder_t::decodeSignal(signal,
+			value, signals, &send);
+
+	signal.set_received(true);
+	signal.set_last_value(value);
+	return decoded_value;
+}
+
+/// @brief Parse a signal from a CAN message and apply any required
+/// transforations to get a human readable value.
+///
+/// If the can_signal_t has a non-NULL 'decoder' field, the raw CAN signal value
+/// will be passed to the decoder before returning.
+///
+/// @param[in] signal - The details of the signal to decode and forward.
+/// @param[in] value - The numerical value that will be converted to a boolean.
+/// @param[in] signals - an array of all active signals.
+/// @param[out] send - An output parameter that will be flipped to false if the value could
+///      not be decoded.
+///
+/// @return The decoder returns an openxc_DynamicField, which may contain a number,
+/// string or boolean. If 'send' is false, the return value is undefined.
+///
+openxc_DynamicField decoder_t::decodeSignal( can_signal_t& signal,
+		float value, const std::vector<can_signal_t>& signals, bool* send)
+{
+	SignalDecoder decoder = signal.get_decoder() == nullptr ?
+							noopDecoder : signal.get_decoder();
+	openxc_DynamicField decoded_value = decoder(signal, signals,
+			value, send);
+	return decoded_value;
+}
+
+/// @brief Decode a transformed, human readable value from an raw CAN signal
+/// already parsed from a CAN message.
+///
+/// This is the same as decodeSignal but you must parse the bitfield value of the signal from the CAN
+/// message yourself. This is useful if you need that raw value for something
+/// else.
+///
+/// @param[in] signal - The details of the signal to decode and forward.
+/// @param[in] message - Raw CAN message to decode
+/// @param[in] signals - an array of all active signals.
+/// @param[out] send - An output parameter that will be flipped to false if the value could
+///      not be decoded.
+///
+openxc_DynamicField decoder_t::decodeSignal( can_signal_t& signal,
+		const can_message_t& message, const std::vector<can_signal_t>& signals, bool* send)
+{
+	float value = parseSignalBitfield(signal, message);
+	return decodeSignal(signal, value, signals, send);
+}
+
+
+///
+/// @brief Decode the payload of an OBD-II PID.
+///
+/// This function matches the type signature for a DiagnosticResponseDecoder, so
+/// it can be used as the decoder for a DiagnosticRequest. It returns the decoded
+/// value of the PID, using the standard formulas (see
+/// http://en.wikipedia.org/wiki/OBD-II_PIDs#Mode_01).
+///
+/// @param[in] response - the received DiagnosticResponse (the data is in response.payload,
+///  a byte array). This is most often used when the byte order is
+///  signiticant, i.e. with many OBD-II PID formulas.
+/// @param[in] parsed_payload - the entire payload of the response parsed as an int.
+///
+/// @return Float decoded value.
+///
+float decoder_t::decode_obd2_response(const DiagnosticResponse* response, float parsed_payload)
+{
+	return diagnostic_decode_obd2_pid(response);
+}
\ No newline at end of file