summaryrefslogtreecommitdiffstats
path: root/docs/2-Installation.md
diff options
context:
space:
mode:
authorStephane Desneux <stephane.desneux@iot.bzh>2017-03-20 19:29:41 +0100
committerStephane Desneux <stephane.desneux@iot.bzh>2017-03-20 20:15:13 +0100
commitc9b405ea53461c174544bb570bf92d756c9ab4bb (patch)
tree7da97f913879073114d1967598e00f506656d5d3 /docs/2-Installation.md
parent49ce83ea664123d3e419af937b0990627acdeb6e (diff)
Documentation: reviewed and updated
Some fixes: * document title * gitbook-plugin-richquotes disabled due to bad rendering * TOC titles and ordering Change-Id: I09b133f45a32b179ca4d1e8e13ea3b1e2fdb795b
Diffstat (limited to 'docs/2-Installation.md')
-rw-r--r--docs/2-Installation.md41
1 files changed, 22 insertions, 19 deletions
diff --git a/docs/2-Installation.md b/docs/2-Installation.md
index d813bf7..f2823b6 100644
--- a/docs/2-Installation.md
+++ b/docs/2-Installation.md
@@ -1,12 +1,12 @@
# Prerequisites
-- An AGL system installed with latest Chinook version (>3.0.2).
+* An AGL system installed with latest Chinook version \(&gt;3.0.2\).
-- Make sure you built the AGL generator else you will not be able to generate custom low-level CAN binding. Generator can be found [here](http://github.com/iotbzh/can-config-generator) with the attached instruction to install and run it.
+* Make sure you built the AGL generator else you will not be able to generate custom low-level CAN binding. Generator can be found [here](http://github.com/iotbzh/can-config-generator) with the attached instruction to install and run it.
-It will produce a *configuration-generated.cpp* file to paste in the source, *src/*, directory.
+It will produce a _configuration-generated.cpp_ file to paste in the source, _src/_, directory.
-- Make sure you already set up the AGL SDK using the following [guide](http://docs.iot.bzh/docs/getting_started/en/dev/reference/setup-sdk-environment.html).
+* Make sure you already set up the AGL SDK using the following [guide](http://docs.iot.bzh/docs/getting_started/en/dev/reference/setup-sdk-environment.html).
To get the correct SDK version installed, you **must** prepare your environment with the **chinook-next** version. To do so, run the following command in your docker image:
@@ -14,14 +14,14 @@ To get the correct SDK version installed, you **must** prepare your environment
$ prepare_meta -f chinook-next -o /xdt -l /home/devel/mirror -p /home/devel/share/proprietary-renesas-rcar/ -t porter -e wipeconfig -e rm_work
```
-- Check that you updated git submodules, executing the following commands from this repository:
+* Check that you updated git submodules, executing the following commands from this repository:
```bash
$ git submodule init
$ git submodule update
```
-- An [USB CAN adapter](http://shop.8devices.com/usb2can) connected to OBD2 connector through the [right cable](http://www.mouser.fr/ProductDetail/EasySync/OBD-M-DB9-F-ES/)).
+* An [USB CAN adapter](http://shop.8devices.com/usb2can) connected to OBD2 connector through the [right cable](http://www.mouser.fr/ProductDetail/EasySync/OBD-M-DB9-F-ES/)\).
# Getting started
@@ -32,9 +32,9 @@ $ git submodule update
* CMake version 3.0 or later
* G++, Clang++ or any C++11 complient compiler.
* Boost
- * filesystem
- * program_options
- * system
+ * filesystem
+ * program\_options
+ * system
You can install any of these using your package manager. For instance, inside the iotbzh's docker image, you must enter this command :
@@ -54,7 +54,7 @@ remote: Compressing objects: 100% (42/42), done.
remote: Total 74 (delta 30), reused 67 (delta 27), pack-reused 0
Unpacking objects: 100% (74/74), done.
Checking connectivity... done.
-
+
<b>devel@bsp-devkit:~/projects/$</b> cd can-config-generator
<b>devel@bsp-devkit:~/projects/can-config-generator/(master)$</b> mkdir build
<b>devel@bsp-devkit:~/projects/can-config-generator/build(master)$</b> cmake -G "Unix Makefiles" ..
@@ -98,21 +98,21 @@ To generate your config file you just have to run the generator using the `-m` o
$ can-config-generator -m ../tests/basic.json -o configuration-generated.cpp
```
-If you omit the `-o` option, then code is generated on the stdout.
-You also can specify a header and a footer file.
-These files must be valid C++ fragment as long as they will be inserted as is.
+If you omit the `-o` option, then code is generated on the stdout.
+You also can specify a header and a footer file.
+These files must be valid C++ fragment as long as they will be inserted as is.
Use the `-h` option to display help.
-> **CAUTION** Each `diagnostic_message` must define the same `bus` as the binding will use only one bus.
+> **CAUTION:** Each `diagnostic_message` must define the same `bus` as the binding will use only one bus.
### Supported OpenXC items
-About now, compliance with OpenXC reference is in progress, can-config-generator and CAN_signaling will implement them soon.
+About now, compliance with OpenXC reference is in progress, can-config-generator and CAN\_signaling will implement them soon.
`initializers`, `loopers`, `commands` and `handlers` nodes are ignored for now.
This generator will follow OpenXC support status of the low level CAN signaling binding.
-> **NOTE** The `buses` item will not be supported by this generator because the binding use another way to declare and configure buses. Please refer to the binding's documentation.
+> **NOTE**: The `buses` item will not be supported by this generator because the binding use another way to declare and configure buses. Please refer to the binding's documentation.
## Compile and install the binding
@@ -153,9 +153,9 @@ Error org.freedesktop.DBus.Error.Failed: "system error"
It's because installation remove the binding before installing it.
-If it is the first time that you make the installation then you'll have this message in place of ***true***.
+If it is the first time that you make the installation then you'll have this message in place of _**true**_.
-To install it manually, you need to copy the *low-can-binding.wgt* file on your target, then from it execute the following commands :
+To install it manually, you need to copy the _low-can-binding.wgt_ file on your target, then from it execute the following commands :
On your host, to copy over the network :
@@ -163,9 +163,12 @@ On your host, to copy over the network :
$ scp low-can-binding.wgt root@<target_IP>:~
```
-On the target, assuming ***wgt*** file is in the root home directory :
+On the target, assuming _**wgt**_ file is in the root home directory :
```bash
~# afm-util install low-can-binding.wgt
{ "added": "low-can-binding@0.1" }
```
+
+
+