diff options
author | 2017-03-20 19:29:41 +0100 | |
---|---|---|
committer | 2017-03-20 20:15:13 +0100 | |
commit | c9b405ea53461c174544bb570bf92d756c9ab4bb (patch) | |
tree | 7da97f913879073114d1967598e00f506656d5d3 /docs/2-Installation.md | |
parent | 49ce83ea664123d3e419af937b0990627acdeb6e (diff) |
Documentation: reviewed and updated
Some fixes:
* document title
* gitbook-plugin-richquotes disabled due to bad rendering
* TOC titles and ordering
Change-Id: I09b133f45a32b179ca4d1e8e13ea3b1e2fdb795b
Diffstat (limited to 'docs/2-Installation.md')
-rw-r--r-- | docs/2-Installation.md | 41 |
1 files changed, 22 insertions, 19 deletions
diff --git a/docs/2-Installation.md b/docs/2-Installation.md index d813bf7..f2823b6 100644 --- a/docs/2-Installation.md +++ b/docs/2-Installation.md @@ -1,12 +1,12 @@ # Prerequisites -- An AGL system installed with latest Chinook version (>3.0.2). +* An AGL system installed with latest Chinook version \(>3.0.2\). -- Make sure you built the AGL generator else you will not be able to generate custom low-level CAN binding. Generator can be found [here](http://github.com/iotbzh/can-config-generator) with the attached instruction to install and run it. +* Make sure you built the AGL generator else you will not be able to generate custom low-level CAN binding. Generator can be found [here](http://github.com/iotbzh/can-config-generator) with the attached instruction to install and run it. -It will produce a *configuration-generated.cpp* file to paste in the source, *src/*, directory. +It will produce a _configuration-generated.cpp_ file to paste in the source, _src/_, directory. -- Make sure you already set up the AGL SDK using the following [guide](http://docs.iot.bzh/docs/getting_started/en/dev/reference/setup-sdk-environment.html). +* Make sure you already set up the AGL SDK using the following [guide](http://docs.iot.bzh/docs/getting_started/en/dev/reference/setup-sdk-environment.html). To get the correct SDK version installed, you **must** prepare your environment with the **chinook-next** version. To do so, run the following command in your docker image: @@ -14,14 +14,14 @@ To get the correct SDK version installed, you **must** prepare your environment $ prepare_meta -f chinook-next -o /xdt -l /home/devel/mirror -p /home/devel/share/proprietary-renesas-rcar/ -t porter -e wipeconfig -e rm_work ``` -- Check that you updated git submodules, executing the following commands from this repository: +* Check that you updated git submodules, executing the following commands from this repository: ```bash $ git submodule init $ git submodule update ``` -- An [USB CAN adapter](http://shop.8devices.com/usb2can) connected to OBD2 connector through the [right cable](http://www.mouser.fr/ProductDetail/EasySync/OBD-M-DB9-F-ES/)). +* An [USB CAN adapter](http://shop.8devices.com/usb2can) connected to OBD2 connector through the [right cable](http://www.mouser.fr/ProductDetail/EasySync/OBD-M-DB9-F-ES/)\). # Getting started @@ -32,9 +32,9 @@ $ git submodule update * CMake version 3.0 or later * G++, Clang++ or any C++11 complient compiler. * Boost - * filesystem - * program_options - * system + * filesystem + * program\_options + * system You can install any of these using your package manager. For instance, inside the iotbzh's docker image, you must enter this command : @@ -54,7 +54,7 @@ remote: Compressing objects: 100% (42/42), done. remote: Total 74 (delta 30), reused 67 (delta 27), pack-reused 0 Unpacking objects: 100% (74/74), done. Checking connectivity... done. - + <b>devel@bsp-devkit:~/projects/$</b> cd can-config-generator <b>devel@bsp-devkit:~/projects/can-config-generator/(master)$</b> mkdir build <b>devel@bsp-devkit:~/projects/can-config-generator/build(master)$</b> cmake -G "Unix Makefiles" .. @@ -98,21 +98,21 @@ To generate your config file you just have to run the generator using the `-m` o $ can-config-generator -m ../tests/basic.json -o configuration-generated.cpp ``` -If you omit the `-o` option, then code is generated on the stdout. -You also can specify a header and a footer file. -These files must be valid C++ fragment as long as they will be inserted as is. +If you omit the `-o` option, then code is generated on the stdout. +You also can specify a header and a footer file. +These files must be valid C++ fragment as long as they will be inserted as is. Use the `-h` option to display help. -> **CAUTION** Each `diagnostic_message` must define the same `bus` as the binding will use only one bus. +> **CAUTION:** Each `diagnostic_message` must define the same `bus` as the binding will use only one bus. ### Supported OpenXC items -About now, compliance with OpenXC reference is in progress, can-config-generator and CAN_signaling will implement them soon. +About now, compliance with OpenXC reference is in progress, can-config-generator and CAN\_signaling will implement them soon. `initializers`, `loopers`, `commands` and `handlers` nodes are ignored for now. This generator will follow OpenXC support status of the low level CAN signaling binding. -> **NOTE** The `buses` item will not be supported by this generator because the binding use another way to declare and configure buses. Please refer to the binding's documentation. +> **NOTE**: The `buses` item will not be supported by this generator because the binding use another way to declare and configure buses. Please refer to the binding's documentation. ## Compile and install the binding @@ -153,9 +153,9 @@ Error org.freedesktop.DBus.Error.Failed: "system error" It's because installation remove the binding before installing it. -If it is the first time that you make the installation then you'll have this message in place of ***true***. +If it is the first time that you make the installation then you'll have this message in place of _**true**_. -To install it manually, you need to copy the *low-can-binding.wgt* file on your target, then from it execute the following commands : +To install it manually, you need to copy the _low-can-binding.wgt_ file on your target, then from it execute the following commands : On your host, to copy over the network : @@ -163,9 +163,12 @@ On your host, to copy over the network : $ scp low-can-binding.wgt root@<target_IP>:~ ``` -On the target, assuming ***wgt*** file is in the root home directory : +On the target, assuming _**wgt**_ file is in the root home directory : ```bash ~# afm-util install low-can-binding.wgt { "added": "low-can-binding@0.1" } ``` + + + |