Manage prefix on CAN and OBD2 prefix. Searching signals

is made on generic_name (without prefix) and returned
vector of string is filled with name with prefix. Then
you can process on them based upon their name differently.

OBD2 signals will generated recurring request on diagnostic
manager and decoding will not be handled the same way too.

Change-Id: I2c5239ef49661941a0a748debe0bd536b2954b3a
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

1 files changed, 22 insertions, 22 deletions

diff --git a/src/configuration.cpp b/src/configuration.cpp
index ff6adda..e56dc1c 100644
--- a/src/configuration.cpp
+++ b/src/configuration.cpp
@@ -21,25 +21,25 @@
 
 // Pre-defined OBD-II PIDs to query for if supported by the vehicle.
  std::vector<obd2_signal_t> OBD2_PIDS = {
-	{ 0x04, "obd2.engine.load", 0, 100, POURCENT, 5, false},
-	{ 0x05, "obd2.engine.coolant.temperature", -40, 215, DEGREES_CELSIUS, 1, false},
-	{ 0x0a, "obd2.fuel.pressure", 0, 765, KPA, 1, false},
-	{ 0x0b, "obd2.intake.manifold.pressure", 0, 255, KPA, 1, false},
-	{ 0x0c, "obd2.engine.speed", 0, 16383, RPM, 5, false},
-	{ 0x0d, "obd2.vehicle.speed", 0, 255, KM_H, 5, false},
-	{ 0x0f, "obd2.intake.air.temperature", -40, 215, DEGREES_CELSIUS, 1, false},
-	{ 0x10, "obd2.mass.airflow", 0, 655, GRAMS_SEC, 5, false},
-	{ 0x11, "obd2.throttle.position", 0, 100, POURCENT, 5, false},
-	{ 0x1f, "obd2.running.time", 0, 65535, SECONDS, 1, false},
-	{ 0x2d, "obd2.EGR.error", -100, 99, POURCENT, 0, false},
-	{ 0x2f, "obd2.fuel.level", 0, 100, POURCENT, 1, false},
-	{ 0x33, "obd2.barometric.pressure", 0, 255, KPA, 1, false},
-	{ 0x4c, "obd2.commanded.throttle.position", 0, 100, POURCENT, 1, false},
-	{ 0x52, "obd2.ethanol.fuel.percentage", 0, 100, POURCENT, 1, false},
-	{ 0x5a, "obd2.accelerator.pedal.position", 0, 100, POURCENT, 5, false},
-	{ 0x5b, "obd2.hybrid.battery-pack.remaining.life", 0, 100, POURCENT, 5, false},
-	{ 0x5c, "obd2.engine.oil.temperature",-40, 210, DEGREES_CELSIUS, 1, false},
-	{ 0x63, "obd2.engine.torque", 0, 65535, NM, 1, false}
+	obd2_signal_t(0x04, "engine.load", 0, 100, POURCENT, 5, false),
+	obd2_signal_t(0x05, "engine.coolant.temperature", -40, 215, DEGREES_CELSIUS, 1, false),
+	obd2_signal_t(0x0a, "fuel.pressure", 0, 765, KPA, 1, false),
+	obd2_signal_t(0x0b, "intake.manifold.pressure", 0, 255, KPA, 1, false),
+	obd2_signal_t(0x0c, "engine.speed", 0, 16383, RPM, 5, false),
+	obd2_signal_t(0x0d, "vehicle.speed", 0, 255, KM_H, 5, false),
+	obd2_signal_t(0x0f, "intake.air.temperature", -40, 215, DEGREES_CELSIUS, 1, false),
+	obd2_signal_t(0x10, "mass.airflow", 0, 655, GRAMS_SEC, 5, false),
+	obd2_signal_t(0x11, "throttle.position", 0, 100, POURCENT, 5, false),
+	obd2_signal_t(0x1f, "running.time", 0, 65535, SECONDS, 1, false),
+	obd2_signal_t(0x2d, "EGR.error", -100, 99, POURCENT, 0, false),
+	obd2_signal_t(0x2f, "fuel.level", 0, 100, POURCENT, 1, false),
+	obd2_signal_t(0x33, "barometric.pressure", 0, 255, KPA, 1, false),
+	obd2_signal_t(0x4c, "commanded.throttle.position", 0, 100, POURCENT, 1, false),
+	obd2_signal_t(0x52, "ethanol.fuel.percentage", 0, 100, POURCENT, 1, false),
+	obd2_signal_t(0x5a, "accelerator.pedal.position", 0, 100, POURCENT, 5, false),
+	obd2_signal_t(0x5b, "hybrid.battery-pack.remaining.life", 0, 100, POURCENT, 5, false),
+	obd2_signal_t(0x5c, "engine.oil.temperature",-40, 210, DEGREES_CELSIUS, 1, false),
+	obd2_signal_t(0x63, "engine.torque", 0, 65535, NM, 1, false)
 };
 
 // Dumb signals and message implementation. To get compile.
@@ -115,7 +115,7 @@ void configuration_t::set_active_message_set(uint8_t id)
 }
 
 /**
- * @fn std::vector<std::string> find_signals(const openxc_DynamicField &key)
+ * @fn std::vector<std::string> find_can_signals(const openxc_DynamicField &key)
  * @brief return signals name found searching through CAN_signals and OBD2 pid
  * 
  * @param[in] key - can contain numeric or string value in order to search against 
@@ -134,7 +134,7 @@ void configuration_t::find_obd2_signals(const openxc_DynamicField &key, std::vec
 				lookup_signals_by_id(key.numeric_value, obd2_signals_[active_message_set_], found_signals);
 			break;
 		default:
-			ERROR(binder_interface, "find_signals: wrong openxc_DynamicField specified. Use openxc_DynamicField_Type_NUM or openxc_DynamicField_Type_STRING type only.");
+			ERROR(binder_interface, "find_obd2_signals: wrong openxc_DynamicField specified. Use openxc_DynamicField_Type_NUM or openxc_DynamicField_Type_STRING type only.");
 			break;
 	}
 	DEBUG(binder_interface, "Found %d signal(s)", (int)found_signals.size());
@@ -160,7 +160,7 @@ void configuration_t::find_can_signals(const openxc_DynamicField& key, std::vect
 			lookup_signals_by_id(key.numeric_value, can_signals_[active_message_set_], found_signals);
 			break;
 		default:
-			ERROR(binder_interface, "find_signals: wrong openxc_DynamicField specified. Use openxc_DynamicField_Type_NUM or openxc_DynamicField_Type_STRING type only.");
+			ERROR(binder_interface, "find_can_signals: wrong openxc_DynamicField specified. Use openxc_DynamicField_Type_NUM or openxc_DynamicField_Type_STRING type only.");
 			break;
 	}
 	DEBUG(binder_interface, "Found %d signal(s)", (int)found_signals.size());