Introducing diagnostic manager class.

It will hold communication through uds-c lib allowing
to communication with diagnostic protocol obd2. It is
attached to can_bus_dev_t class 'cause it must regularly
send CAN message through it.

Change-Id: I2d9d8dfaca10e9865bf82b0ae83e65490ca982f8
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

3 files changed, 121 insertions, 14 deletions

diff --git a/src/diagnostic/diagnostic-manager.cpp b/src/diagnostic/diagnostic-manager.cpp
new file mode 100644
index 0000000..501c05a
--- /dev/null
+++ b/src/diagnostic/diagnostic-manager.cpp
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2015, 2016 "IoT.bzh"
+ * Author "Romain Forlot" <romain.forlot@iot.bzh>
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *	 http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "obd2/diagnostic-manager.hpp"
+
+#include "low-can-binding.hpp"
+
+diagnostic_manager_t::diagnostic_manager_t(can_bus_dev_t& bus)
+	: bus_(bus)
+{}
+
+void diagnostic_manager_t::shims_logger(const char* m)
+{
+	DEBUG(binder_interface, "%s", m);
+}
+
+void diagnostic_manager_t::shims_timer()
+{}
+
+/**
+ * @brief initialize shims used by UDS lib and set initialized_ to true.
+ *  It is needed before used the diagnostic manager fully because shims are
+ *  required by most member functions.
+ */
+void diagnostic_manager_t::init_diagnostic_shims()
+{
+	DiagnosticShims shims_ = diagnostic_init_shims(shims_logger, bus_.send_can_message, NULL);
+	initialized_ = true;
+}
\ No newline at end of file
diff --git a/src/diagnostic/diagnostic-manager.hpp b/src/diagnostic/diagnostic-manager.hpp
new file mode 100644
index 0000000..8aa9240
--- /dev/null
+++ b/src/diagnostic/diagnostic-manager.hpp
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2015, 2016 "IoT.bzh"
+ * Author "Romain Forlot" <romain.forlot@iot.bzh>
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *	 http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <vector>
+
+#include "uds/uds.h"
+#include "can/can-bus.hpp"
+#include "can/can-message.hpp"
+#include "obd2/active-diagnostic-request.hpp"
+
+#include "low-can-binding.hpp"
+
+/* Private: Each CAN bus needs its own set of shim functions, so this should
+ * match the maximum CAN controller count.
+ */
+#define MAX_SHIM_COUNT can_bus_t.get_can_devices().size()
+
+/**
+ * @brief The core structure for running the diagnostics module on the VI.
+ *
+ * @desc This stores details about the active requests and shims required to connect
+ * the diagnostics library to the VI's CAN peripheral.
+ */
+class diagnostic_manager_t {
+	protected:
+	void shims_logger(const char* m);
+	void shims_timer();
+
+	private:
+		DiagnosticShims shims_; /*!< shims_ - An array of shim functions for each CAN bus that plug the diagnostics
+								 * library (uds-c) into the VI's CAN peripheral.*/
+		can_bus_dev_t* bus_; /*!< bus_ - A reference to the CAN bus that should be used for all standard OBD-II requests, if the bus is not
+							  * explicitly spcified in the request. If NULL, all requests require an explicit bus.*/
+		std::queue<active_diagnostic_request_t> recurringRequests_; /*!< recurringRequests - A queue of active, recurring diagnostic requests. When
+																  * a response is received for a recurring request or it times out, it is
+																  * popped from the queue and pushed onto the back. */
+		std::vector<active_diagnostic_request_t> nonrecurringRequests_; /*!< nonrecurringRequests - A list of active one-time diagnostic requests. When a
+																	  * response is received for a non-recurring request or it times out, it is
+																	  * removed from this list and placed back in the free list.*/
+		std::vector<active_diagnostic_request_t> freeRequestEntries_; /*!< freeRequestEntries - A list of all available slots for active diagnostic
+																	* requests. This free list is backed by statically allocated entries in
+																	* the requestListEntries attribute.*/
+		std::vector<active_diagnostic_request_t> requestListEntries_[50]; /*!< requestListEntries - Static allocation for all active diagnostic requests.*/
+
+		bool initialized_; /*!< * initialized - True if the DiagnosticsManager has been initialized with shims. It will interface with the uds-c lib*/
+
+	public:
+		diagnostic_manager_t(can_bus_dev_t& bus);
+		void init_diagnostic_shims();
+ 
+		void checkSupportedPids(const active_diagnostic_request_t& request,
+		const DiagnosticResponse& response, float parsedPayload);
+
+		bool addRecurringRequest(DiagnosticRequest* request, const char* name,
+			bool waitForMultipleResponses, const DiagnosticResponseDecoder decoder,
+			const DiagnosticResponseCallback callback, float frequencyHz);
+
+		void reset();
+
+		void add_request(int pid);
+};
diff --git a/src/diagnostic/diagnostic-message.cpp b/src/diagnostic/diagnostic-message.cpp
index 71b0f7d..707b314 100644
--- a/src/diagnostic/diagnostic-message.cpp
+++ b/src/diagnostic/diagnostic-message.cpp
@@ -105,22 +105,9 @@ void obd2_signals_t::find_obd2_signals(const openxc_DynamicField &key, std::vect
 	DEBUG(binder_interface, "Found %d signal(s)", (int)found_signals.size());
 }
 
-uint32_t get_signal_id(const obd2_signals_t& sig)
-{
-	return (uint32_t)sig.pid;
-}
-
-void shims_logger(const char* m, const struct afb_binding_interface *interface)
-{
-	DEBUG(interface, "%s", m);
-}
-
-void shims_timer()
-{
-}
-
 bool obd2_signals_t::is_obd2_response(can_message_t can_message)
 {
+	/*
 	if(can_message.get_id() >= 0x7E8 && can_message.get_id() <= 0x7EF)
 	{
 		openxc_VehicleMessage message = {0};