summaryrefslogtreecommitdiffstats
path: root/CAN-binder/libs/nanopb/examples/cmake_simple
diff options
context:
space:
mode:
Diffstat (limited to 'CAN-binder/libs/nanopb/examples/cmake_simple')
-rw-r--r--CAN-binder/libs/nanopb/examples/cmake_simple/CMakeLists.txt16
-rw-r--r--CAN-binder/libs/nanopb/examples/cmake_simple/README.txt18
-rw-r--r--CAN-binder/libs/nanopb/examples/cmake_simple/simple.c71
-rw-r--r--CAN-binder/libs/nanopb/examples/cmake_simple/simple.proto9
4 files changed, 114 insertions, 0 deletions
diff --git a/CAN-binder/libs/nanopb/examples/cmake_simple/CMakeLists.txt b/CAN-binder/libs/nanopb/examples/cmake_simple/CMakeLists.txt
new file mode 100644
index 0000000..e5f33a0
--- /dev/null
+++ b/CAN-binder/libs/nanopb/examples/cmake_simple/CMakeLists.txt
@@ -0,0 +1,16 @@
+cmake_minimum_required(VERSION 2.8)
+project(NANOPB_CMAKE_SIMPLE C)
+
+set(CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/../../extra)
+find_package(Nanopb REQUIRED)
+include_directories(${NANOPB_INCLUDE_DIRS})
+
+nanopb_generate_cpp(PROTO_SRCS PROTO_HDRS simple.proto)
+include_directories(${CMAKE_CURRENT_BINARY_DIR})
+#add_custom_target(generate_proto_sources DEPENDS ${PROTO_SRCS} ${PROTO_HDRS})
+set_source_files_properties(${PROTO_SRCS} ${PROTO_HDRS}
+ PROPERTIES GENERATED TRUE)
+
+set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Werror -g -O0")
+
+add_executable(simple simple.c ${PROTO_SRCS} ${PROTO_HDRS})
diff --git a/CAN-binder/libs/nanopb/examples/cmake_simple/README.txt b/CAN-binder/libs/nanopb/examples/cmake_simple/README.txt
new file mode 100644
index 0000000..aa0f3f3
--- /dev/null
+++ b/CAN-binder/libs/nanopb/examples/cmake_simple/README.txt
@@ -0,0 +1,18 @@
+Nanopb example "simple" using CMake
+=======================
+
+This example is the same as the simple nanopb example but built using CMake.
+
+Example usage
+-------------
+
+On Linux, create a build directory and then call cmake:
+
+ nanopb/examples/cmake_simple$ mkdir build
+ nanopb/examples/cmake_simple$ cd build/
+ nanopb/examples/cmake_simple/build$ cmake ..
+ nanopb/examples/cmake_simple/build$ make
+
+After that, you can run it with the command: ./simple
+
+On other platforms supported by CMake, refer to CMake instructions.
diff --git a/CAN-binder/libs/nanopb/examples/cmake_simple/simple.c b/CAN-binder/libs/nanopb/examples/cmake_simple/simple.c
new file mode 100644
index 0000000..1f6b137
--- /dev/null
+++ b/CAN-binder/libs/nanopb/examples/cmake_simple/simple.c
@@ -0,0 +1,71 @@
+#include <stdio.h>
+#include <pb_encode.h>
+#include <pb_decode.h>
+#include "simple.pb.h"
+
+int main()
+{
+ /* This is the buffer where we will store our message. */
+ uint8_t buffer[128];
+ size_t message_length;
+ bool status;
+
+ /* Encode our message */
+ {
+ /* Allocate space on the stack to store the message data.
+ *
+ * Nanopb generates simple struct definitions for all the messages.
+ * - check out the contents of simple.pb.h!
+ * It is a good idea to always initialize your structures
+ * so that you do not have garbage data from RAM in there.
+ */
+ SimpleMessage message = SimpleMessage_init_zero;
+
+ /* Create a stream that will write to our buffer. */
+ pb_ostream_t stream = pb_ostream_from_buffer(buffer, sizeof(buffer));
+
+ /* Fill in the lucky number */
+ message.lucky_number = 13;
+
+ /* Now we are ready to encode the message! */
+ status = pb_encode(&stream, SimpleMessage_fields, &message);
+ message_length = stream.bytes_written;
+
+ /* Then just check for any errors.. */
+ if (!status)
+ {
+ printf("Encoding failed: %s\n", PB_GET_ERROR(&stream));
+ return 1;
+ }
+ }
+
+ /* Now we could transmit the message over network, store it in a file or
+ * wrap it to a pigeon's leg.
+ */
+
+ /* But because we are lazy, we will just decode it immediately. */
+
+ {
+ /* Allocate space for the decoded message. */
+ SimpleMessage message = SimpleMessage_init_zero;
+
+ /* Create a stream that reads from the buffer. */
+ pb_istream_t stream = pb_istream_from_buffer(buffer, message_length);
+
+ /* Now we are ready to decode the message. */
+ status = pb_decode(&stream, SimpleMessage_fields, &message);
+
+ /* Check for errors... */
+ if (!status)
+ {
+ printf("Decoding failed: %s\n", PB_GET_ERROR(&stream));
+ return 1;
+ }
+
+ /* Print the data contained in the message. */
+ printf("Your lucky number was %d!\n", message.lucky_number);
+ }
+
+ return 0;
+}
+
diff --git a/CAN-binder/libs/nanopb/examples/cmake_simple/simple.proto b/CAN-binder/libs/nanopb/examples/cmake_simple/simple.proto
new file mode 100644
index 0000000..5c73a3b
--- /dev/null
+++ b/CAN-binder/libs/nanopb/examples/cmake_simple/simple.proto
@@ -0,0 +1,9 @@
+// A very simple protocol definition, consisting of only
+// one message.
+
+syntax = "proto2";
+
+message SimpleMessage {
+ required int32 lucky_number = 1;
+}
+