diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/2-Installation.md | 74 |
1 files changed, 12 insertions, 62 deletions
diff --git a/docs/2-Installation.md b/docs/2-Installation.md index 784a062..4043885 100644 --- a/docs/2-Installation.md +++ b/docs/2-Installation.md @@ -2,15 +2,15 @@ * An AGL system installed with latest Chinook version \(>3.0.2\). -* Make sure you built the AGL generator else you will not be able to generate custom low-level CAN binding. Generator can be found [here](http://github.com/iotbzh/can-config-generator) with the attached instruction to install and run it. +* Make sure you built the AGL generator else you will not be able to generate custom low-level CAN binding. It will produce a _configuration-generated.cpp_ file to paste in the source, _src/_, directory. * Make sure you already set up the AGL SDK using the following [SDK Quick Setup Guide](http://docs.iot.bzh/docs/getting_started/en/dev/reference/setup-sdk-environment.html). Alternatively, please refer to official guides available on [AGL Developer Site](http://docs.automotivelinux.org/docs/devguides/en/dev/#guides). -To get the correct SDK version installed, you **must** prepare your environment with the **chinook-next** version. To do so, run the following command in your docker image in the step 4 in place of `... [ prepare build environment ] ...`: +To get the correct SDK version installed, you **must** prepare your environment with the **iotbzh** flavor using _prepare_meta_ tool. To do so, run the following command in your docker image in the step 4 in place of `... [ prepare build environment ] ...`: -> **NOTE** These commands assume that proprietary graphic drivers for Renesas Porter board are located in `/home/devel/share/proprietary-renesas-rcar` directory. +> **NOTE** These commands assume that proprietary graphic drivers for Renesas Porter board are located in _/home/devel/share/proprietary-renesas-rcar_ directory. ```bash $ prepare_meta -f chinook-next -o /xdt -l /home/devel/mirror -p /home/devel/share/proprietary-renesas-rcar/ -t porter -e wipeconfig -e rm_work @@ -29,19 +29,6 @@ $ /xdt/build/agl-init-build-env * CMake version 3.0 or later * G++, Clang++ or any C++11 compliant compiler. -* Boost - * filesystem - * program\_options - * system - -You can install any of these using your package manager. For instance, inside the iotbzh's docker image, you must enter this command : - -```bash -$ sudo apt-get update -$ sudo apt-get install libboost-system-dev libboost-filesystem-dev libboost-program-options-dev -``` - -You may want to install `libboost-all-dev` to get all boost components even if it's not required. ### Compile @@ -50,8 +37,8 @@ You may want to install `libboost-all-dev` to get all boost components even if i ```bash $ export PATH=$PATH:/xdt/sdk/sysroots/x86_64-aglsdk-linux/usr/bin $ export WD=$(pwd) -$ git clone https://github.com/iotbzh/can-config-generator.git -$ cd can-config-generator +$ git clone https://github.com/iotbzh/CAN_signaling +$ export GENERATOR=${WD}/CAN-signaling/CAN-config-generator $ mkdir -p build $ cd build $ cmake -G "Unix Makefiles" .. @@ -159,68 +146,31 @@ Clone the binding repository, copy the generated file and updated the git submod Execute the following commands from this repository: ```bash -$ cd $WD -$ git clone https://github.com/iotbzh/CAN_signaling -b v1.0 -$ cd CAN_signaling -$ git submodule init -$ git submodule update -$ cp $WD/can-config-generator/build/configuration-generated.cpp src/ +$ cd $WD/CAN_signaling/CAN-binder +$ cp ${GENERATOR}/build/configuration-generated.cpp ../low-can-binding/binding ``` -### Installation using *make install* - -With an AGL SDK environment correctly configured and **sourced**, I suggest you to set the TARGET variable in the CMakeLists.txt file located under _src_ directory if you have an AGL target already running in your network. - -Then you can directly build and install the binding and source directory on your target system. - -Execute these commands to get your binding compile: +### Installation ```bash -$ mkdir -p build +$ mkdir build $ cd build $ cmake .. $ make +$ make widget ``` -And if you have set TARGET variable, you can install it on your AGL system: - -```bash -$ make install -[ 16%] Built target bitfield -[ 27%] Built target isotp -[ 40%] Built target openxc -[ 48%] Built target uds -[ 97%] Built target low-can-binding -[100%] Built target widget -Install the project... --- Install configuration: "" -true -{ "added": "low-can-binding@0.1" } -``` - -It's possible that you'll see the following message : - -```bash -Error org.freedesktop.DBus.Error.Failed: "system error" -``` - -It's because installation remove the binding before installing it. - -If it is the first time that you make the installation then you'll have this message in place of _**true**_. - -### Manual Installation - To install it manually, you need to copy the _low-can-binding.wgt_ file on your target, then from it execute the following commands : On your host, to copy over the network : ```bash -$ scp low-can-binding.wgt root@<target_IP>:~ +$ scp low-can-project.wgt root@<target_IP>:~ ``` On the target, assuming _**wgt**_ file is in the root home directory: ```bash # afm-util install low-can-binding.wgt -{ "added": "low-can-binding@0.1" } +{ "added": "low-can-project@0.1" } ``` |