2 files changed, 220 insertions, 0 deletions
diff --git a/src/obd2/obd2.c b/src/obd2/obd2.c
new file mode 100644
index 0000000..9b4ea92
--- /dev/null
+++ b/src/obd2/obd2.c
@@ -0,0 +1,47 @@
+#include <obd2/obd2.h>
+
+DiagnosticShims diagnostic_init_shims(LogShim log,
+        SendCanMessageShim send_can_message,
+        SetTimerShim set_timer) {
+}
+
+DiagnosticRequestHandle diagnostic_request(DiagnosticShims* shims,
+        DiagnosticRequest* request, DiagnosticResponseReceived callback) {
+}
+
+// decide mode 0x1 / 0x22 based on pid type
+DiagnosticRequestHandle diagnostic_request_pid(DiagnosticShims* shims,
+        DiagnosticPidRequestType pid_request_type, uint16_t pid,
+        DiagnosticResponseReceived callback) {
+}
+
+// TODO request malfunction indicator light (MIL) status - request mode 1 pid 1,
+//      parse first bit
+DiagnosticRequestHandle diagnostic_request_malfunction_indicator_status(
+        DiagnosticShims* shims,
+        DiagnosticMilStatusReceived callback) {
+}
+
+DiagnosticRequestHandle diagnostic_request_vin(DiagnosticShims* shims,
+        DiagnosticVinReceived callback) {
+}
+
+DiagnosticRequestHandle diagnostic_request_dtc(DiagnosticShims* shims,
+        DiagnosticTroubleCodeType dtc_type,
+        DiagnosticTroubleCodesReceived callback) {
+}
+
+bool diagnostic_clear_dtc(DiagnosticShims* shims) {
+}
+
+// before calling the callback, split up the received bytes into 1 or 2 byte
+// chunks depending on the mode so the final pid list is actual 1 or 2 byte PIDs
+// TODO request supported PIDs  - request PID 0 and parse 4 bytes in response
+DiagnosticRequestHandle diagnostic_enumerate_pids(DiagnosticShims* shims,
+        DiagnosticRequest* request, DiagnosticPidEnumerationReceived callback) {
+}
+
+void diagnostic_receive_can_frame(DiagnosticRequestHandle* handler,
+        const uint16_t arbitration_id, const uint8_t data[],
+        const uint8_t size) {
+}
diff --git a/src/obd2/obd2.h b/src/obd2/obd2.h
new file mode 100644
index 0000000..e6b5bc9
--- /dev/null
+++ b/src/obd2/obd2.h
@@ -0,0 +1,173 @@
+#ifndef __OBD2_H__
+#define __OBD2_H__
+
+#include <isotp/isotp.h>
+#include <stdint.h>
+#include <stdbool.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define MAX_OBD2_PAYLOAD_LENGTH 7
+#define VIN_LENGTH 17
+
+typedef void (*LogShim)(const char* message);
+typedef bool (*SendCanMessageShim)(const uint16_t arbitration_id,
+        const uint8_t* data, const uint8_t size);
+typedef bool (*SetTimerShim)(uint16_t time_ms, void (*callback));
+
+typedef struct {
+    uint16_t arbitration_id;
+    uint8_t mode;
+    uint16_t pid;
+    uint8_t payload[MAX_OBD2_PAYLOAD_LENGTH];
+    uint8_t payload_length;
+} DiagnosticRequest;
+
+// Thanks to
+// http://www.canbushack.com/blog/index.php?title=scanning-for-diagnostic-data&more=1&c=1&tb=1&pb=1
+// for the list of NRCs
+typedef enum {
+    NRC_SERVICE_NOT_SUPPORTED = 0x11,
+    NRC_SUB_FUNCTION_NOT_SUPPORTED = 0x12,
+    NRC_CONDITIONS_NOT_CORRECT = 0x22,
+    NRC_REQUEST_OUT_OF_RANGE = 0x31,
+    NRC_SECURITY_ACCESS_DENIED = 0x33,
+    NRC_INVALID_KEY = 0x35,
+    NRC_TOO_MANY_ATTEMPS = 0x36,
+    NRC_TIME_DELAY_NOT_EXPIRED = 0x37,
+    NRC_RESPONSE_PENDING = 0x78
+} DiagnosticNegativeResponseCode;
+
+typedef enum {
+    OBD2_MODE_POWERTRAIN_DIAGNOSTIC_REQUEST = 0x1,
+    OBD2_MODE_POWERTRAIN_FREEZE_FRAME_REQUEST = 0x2,
+    OBD2_MODE_EMISSIONS_DTC_REQUEST = 0x3,
+    OBD2_MODE_EMISSIONS_DTC_CLEAR = 0x4,
+    // 0x5 is for non-CAN only
+    // OBD2_MODE_OXYGEN_SENSOR_TEST = 0x5,
+    OBD2_MODE_TEST_RESULTS = 0x6,
+    OBD2_MODE_DRIVE_CYCLE_DTC_REQUEST = 0x7,
+    OBD2_MODE_CONTROL = 0x8,
+    OBD2_MODE_VEHICLE_INFORMATION = 0x9,
+    OBD2_MODE_PERMANENT_DTC_REQUEST = 0xa,
+    // this one isn't technically in OBD2, but both of the enhanced standards
+    // have their PID requests at 0x22
+    OBD2_MODE_ENHANCED_DIAGNOSTIC_REQUEST = 0x22
+} DiagnosticMode;
+
+typedef enum {
+    DTC_EMISSIONS,
+    DTC_DRIVE_CYCLE,
+    DTC_PERMANENT
+} DiagnosticTroubleCodeType;
+
+typedef struct {
+    uint16_t arbitration_id;
+    uint8_t mode;
+    bool success;
+    // if mode is one with a PID, read the correct numbers of PID bytes (1 or 2)
+    // into this field, then store the remainder of the payload in the payload
+    // field
+    uint16_t pid;
+    DiagnosticNegativeResponseCode negative_response_code;
+    // if response mode is a negative response, read first byte of payload into
+    // NRC and store remainder of payload in payload field
+    uint8_t payload[MAX_OBD2_PAYLOAD_LENGTH];
+    uint8_t payload_length;
+} DiagnosticResponse;
+
+typedef enum {
+    POWERTRAIN = 0x0,
+    CHASSIS = 0x1,
+    BODY = 0x2,
+    NETWORK = 0x3
+} DiagnosticTroubleCodeGroup;
+
+typedef struct {
+    DiagnosticTroubleCodeGroup group;
+    uint8_t group_num;
+    uint8_t code;
+} DiagnosticTroubleCode;
+
+typedef void (*DiagnosticResponseReceived)(const DiagnosticResponse* response);
+typedef void (*DiagnosticMilStatusReceived)(bool malfunction_indicator_status);
+typedef void (*DiagnosticVinReceived)(uint8_t vin[]);
+typedef void (*DiagnosticTroubleCodesReceived)(
+        DiagnosticMode mode, DiagnosticTroubleCode* codes);
+typedef void (*DiagnosticPidEnumerationReceived)(
+        const DiagnosticResponse* response, uint16_t* pids);
+
+// TODO should we enumerate every OBD-II PID? need conversion formulas, too
+typedef struct {
+    uint16_t pid;
+    uint8_t bytes_returned;
+    float min_value;
+    float max_value;
+} DiagnosticParameter;
+
+typedef enum {
+    DIAGNOSTIC_REQUEST_TYPE_PID,
+    DIAGNOSTIC_REQUEST_TYPE_DTC,
+    DIAGNOSTIC_REQUEST_TYPE_MIL_STATUS,
+    DIAGNOSTIC_REQUEST_TYPE_VIN
+} DiagnosticRequestType;
+
+typedef struct {
+    IsoTpHandler isotp_handler;
+    DiagnosticRequestType type;
+    DiagnosticResponseReceived callback;
+    DiagnosticMilStatusReceived mil_status_callback;
+    DiagnosticVinReceived vin_callback;
+    bool status;
+} DiagnosticRequestHandle;
+
+typedef enum {
+    DIAGNOSTIC_STANDARD_PID,
+    DIAGNOSTIC_ENHANCED_PID
+} DiagnosticPidRequestType;
+
+typedef struct {
+    IsoTpShims isotp_shims;
+    LogShim log;
+    SendCanMessageShim send_can_message;
+} DiagnosticShims;
+
+DiagnosticShims diagnostic_init_shims(LogShim log,
+        SendCanMessageShim send_can_message,
+        SetTimerShim set_timer);
+
+DiagnosticRequestHandle diagnostic_request(DiagnosticShims* shims,
+        DiagnosticRequest* request, DiagnosticResponseReceived callback);
+
+// decide mode 0x1 / 0x22 based on pid type
+DiagnosticRequestHandle diagnostic_request_pid(DiagnosticShims* shims,
+        DiagnosticPidRequestType pid_request_type, uint16_t pid,
+        DiagnosticResponseReceived callback);
+
+DiagnosticRequestHandle diagnostic_request_malfunction_indicator_status(
+        DiagnosticShims* shims,
+        DiagnosticMilStatusReceived callback);
+
+DiagnosticRequestHandle diagnostic_request_vin(DiagnosticShims* shims,
+        DiagnosticVinReceived callback);
+
+DiagnosticRequestHandle diagnostic_request_dtc(DiagnosticShims* shims,
+        DiagnosticTroubleCodeType dtc_type,
+        DiagnosticTroubleCodesReceived callback);
+
+bool diagnostic_clear_dtc(DiagnosticShims* shims);
+
+DiagnosticRequestHandle diagnostic_enumerate_pids(DiagnosticShims* shims,
+        DiagnosticRequest* request, DiagnosticPidEnumerationReceived callback);
+
+void diagnostic_receive_can_frame(DiagnosticRequestHandle* handler,
+        const uint16_t arbitration_id, const uint8_t data[],
+        const uint8_t size);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __OBD2_H__