diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/obd2/extras.c | 29 | ||||
-rw-r--r-- | src/obd2/obd2.c | 196 |
2 files changed, 104 insertions, 121 deletions
diff --git a/src/obd2/extras.c b/src/obd2/extras.c new file mode 100644 index 0000000..ec1d996 --- /dev/null +++ b/src/obd2/extras.c @@ -0,0 +1,29 @@ +#include <obd2/obd2.h> + +// TODO everything below here is for future work...not critical for now. + +DiagnosticRequestHandle diagnostic_request_malfunction_indicator_status( + DiagnosticShims* shims, + DiagnosticMilStatusReceived callback) { + // TODO request malfunction indicator light (MIL) status - request mode 1 + // pid 1, parse first bit +} + +DiagnosticRequestHandle diagnostic_request_vin(DiagnosticShims* shims, + DiagnosticVinReceived callback) { +} + +DiagnosticRequestHandle diagnostic_request_dtc(DiagnosticShims* shims, + DiagnosticTroubleCodeType dtc_type, + DiagnosticTroubleCodesReceived callback) { +} + +bool diagnostic_clear_dtc(DiagnosticShims* shims) { +} + +DiagnosticRequestHandle diagnostic_enumerate_pids(DiagnosticShims* shims, + DiagnosticRequest* request, DiagnosticPidEnumerationReceived callback) { + // before calling the callback, split up the received bytes into 1 or 2 byte + // chunks depending on the mode so the final pid list is actual 1 or 2 byte PIDs + // TODO request supported PIDs - request PID 0 and parse 4 bytes in response +} diff --git a/src/obd2/obd2.c b/src/obd2/obd2.c index 05be834..0590c1b 100644 --- a/src/obd2/obd2.c +++ b/src/obd2/obd2.c @@ -1,6 +1,7 @@ #include <obd2/obd2.h> #include <arpa/inet.h> +#define ARBITRATION_ID_OFFSET 0x8 #define MODE_RESPONSE_OFFSET 0x40 #define NEGATIVE_RESPONSE_MODE 0x7f #define MAX_DIAGNOSTIC_PAYLOAD_SIZE 6 @@ -23,7 +24,6 @@ DiagnosticShims diagnostic_init_shims(LogShim log, DiagnosticRequestHandle diagnostic_request(DiagnosticShims* shims, DiagnosticRequest* request, DiagnosticResponseReceived callback) { DiagnosticRequestHandle handle = { - // TODO can we copy the request? request: *request, callback: callback, success: false, @@ -50,51 +50,11 @@ DiagnosticRequestHandle diagnostic_request(DiagnosticShims* shims, NULL); handle.isotp_receive_handle = isotp_receive(&handle.isotp_shims, - // TODO need to either always add 0x8 or let the user specify - request->arbitration_id + 0x8, + request->arbitration_id + ARBITRATION_ID_OFFSET, NULL); - // when a can frame is received and passes to the diagnostic handle - // if we haven't successfuly sent the entire message yet, give it to the - // isottp send handle - // if we have sent it, give it to the isotp rx handle - // if we've received properly, mark this request as completed - // how do you get the result? we have it set up for callbacks but that's - // getting to be kind of awkward - // - // say it were to call a callback...what state would it need to pass? - // - // the iso-tp message received callback needs to pass the handle and the - // received message - // - // so in the obd2 library, we get a callback with an isotp message. how do - // we know what diag request i went with, and which diag callback to use? we - // could store context with the isotp handle. the problem is that context is - // self referential and on the stack, so we really can't get a pointer to - // it. - // - // the diagnostic response received callback needs to pass the diagnostic - // handle and the diag response - // - // let's say we simplify things and drop the callbacks. - // - // isotp_receive_can_frame returns an isotp handle with a complete message - // in it if one was received - // - // diagnostic_receive_can_frame returns a diaghandle if one was received - // - // so in the user code you would throw the can frame at each of your active - // diag handles and see if any return a completed message. - // - // is there any advantage to a callback approach? callbacks are useful when - // you have something that will block, bt we don't have anything that will - // block. it's async but we return immediately from each partial parsing - // attempt. - // - // argh, but will we need the callbacks when we add timers for isotp multi - // frame? - // - // what are the timers for exactly? + // TODO notes on multi frame: + // TODO what are the timers for exactly? // // when sending multi frame, send 1 frame, wait for a response // if it says send all, send all right away @@ -126,6 +86,55 @@ DiagnosticRequestHandle diagnostic_request_pid(DiagnosticShims* shims, return diagnostic_request(shims, &request, callback); } +static bool handle_negative_response(IsoTpMessage* message, + DiagnosticResponse* response, DiagnosticShims* shims) { + bool response_was_negative = false; + if(response->mode == NEGATIVE_RESPONSE_MODE) { + response_was_negative = true; + if(message->size > NEGATIVE_RESPONSE_MODE_INDEX) { + response->mode = message->payload[NEGATIVE_RESPONSE_MODE_INDEX]; + } + + if(message->size > NEGATIVE_RESPONSE_NRC_INDEX) { + response->negative_response_code = message->payload[NEGATIVE_RESPONSE_NRC_INDEX]; + } + + response->success = false; + response->completed = true; + } + return response_was_negative; +} + +static bool handle_positive_response(DiagnosticRequestHandle* handle, + IsoTpMessage* message, DiagnosticResponse* response, + DiagnosticShims* shims) { + bool response_was_positive = false; + if(response->mode == handle->request.mode + MODE_RESPONSE_OFFSET) { + response_was_positive = true; + // hide the "response" version of the mode from the user + // if it matched + response->mode = handle->request.mode; + if(handle->request.pid_length > 0 && message->size > 1) { + if(handle->request.pid_length == 2) { + response->pid = *(uint16_t*)&message->payload[PID_BYTE_INDEX]; + response->pid = ntohs(response->pid); + } else { + response->pid = message->payload[PID_BYTE_INDEX]; + } + } + + uint8_t payload_index = 1 + handle->request.pid_length; + response->payload_length = message->size - payload_index; + if(response->payload_length > 0) { + memcpy(response->payload, &message->payload[payload_index], + response->payload_length); + } + response->success = true; + response->completed = true; + } + return response_was_positive; +} + DiagnosticResponse diagnostic_receive_can_frame(DiagnosticShims* shims, DiagnosticRequestHandle* handle, const uint16_t arbitration_id, const uint8_t data[], const uint8_t size) { @@ -143,95 +152,40 @@ DiagnosticResponse diagnostic_receive_can_frame(DiagnosticShims* shims, IsoTpMessage message = isotp_continue_receive(&handle->isotp_shims, &handle->isotp_receive_handle, arbitration_id, data, size); - // TODO this could be cleaned and DRY'd up a bit if(message.completed) { if(message.size > 0) { response.mode = message.payload[0]; - if(response.mode == NEGATIVE_RESPONSE_MODE) { - if(message.size > NEGATIVE_RESPONSE_MODE_INDEX) { - // TODO we're setting the mode to the originating - // request for the error, so the user can confirm - i - // think this is OK since we're storing the failure - // status elsewhere, but think about it. - response.mode = message.payload[NEGATIVE_RESPONSE_MODE_INDEX]; - } - - if(message.size > NEGATIVE_RESPONSE_NRC_INDEX) { - response.negative_response_code = message.payload[NEGATIVE_RESPONSE_NRC_INDEX]; - } - - response.success = false; + if(handle_negative_response(&message, &response, shims)) { + shims->log("Received a negative response to mode %d on arb ID 0x%x", + response.mode, response.arbitration_id); + + // TODO clarify what it means for a handle to be successful (we made + // a good request+response) vs a request itself being + // successfully + // (the other node didn't return a negative response). + handle->success = true; + handle->completed = true; + } else if(handle_positive_response(handle, &message, &response, + shims)) { + shims->log("Received a positive mode %d response on arb ID 0x%x", + response.mode, response.arbitration_id); + handle->success = true; + handle->completed = true; } else { - if(response.mode == handle->request.mode + MODE_RESPONSE_OFFSET) { - // hide the "response" version of the mode from the user - // if it matched - response.mode = handle->request.mode; - if(handle->request.pid_length > 0 && message.size > 1) { - if(handle->request.pid_length == 2) { - response.pid = *(uint16_t*)&message.payload[PID_BYTE_INDEX]; - response.pid = ntohs(response.pid); - } else { - response.pid = message.payload[PID_BYTE_INDEX]; - } - } - - uint8_t payload_index = 1 + handle->request.pid_length; - response.payload_length = message.size - payload_index; - if(response.payload_length > 0) { - memcpy(response.payload, &message.payload[payload_index], - response.payload_length); - } - response.success = true; - } else { - shims->log("Response was for a mode 0x%x request, not our mode 0x%x request", - response.mode - MODE_RESPONSE_OFFSET, - handle->request.mode); - } + shims->log("Response was for a mode 0x%x request, not our mode 0x%x request", + response.mode - MODE_RESPONSE_OFFSET, + handle->request.mode); } } - response.completed = true; - // TODO clarify what it means for a handle to be successful (we made - // a good request+response) vs a request itself being successfuly - // (the other node didn't return a negative response). - handle->success = true; - handle->completed = true; - - if(handle->callback != NULL) { + if(handle->completed && handle->callback != NULL) { handle->callback(&response); } } } else { - shims->log("Handle is already completed"); + shims->log("Mode %d request to arb ID 0x%x is already completed", + handle->request.mode, handle->request.arbitration_id); } return response; } - -// TODO everything below here is for future work...not critical for now. - -DiagnosticRequestHandle diagnostic_request_malfunction_indicator_status( - DiagnosticShims* shims, - DiagnosticMilStatusReceived callback) { - // TODO request malfunction indicator light (MIL) status - request mode 1 - // pid 1, parse first bit -} - -DiagnosticRequestHandle diagnostic_request_vin(DiagnosticShims* shims, - DiagnosticVinReceived callback) { -} - -DiagnosticRequestHandle diagnostic_request_dtc(DiagnosticShims* shims, - DiagnosticTroubleCodeType dtc_type, - DiagnosticTroubleCodesReceived callback) { -} - -bool diagnostic_clear_dtc(DiagnosticShims* shims) { -} - -DiagnosticRequestHandle diagnostic_enumerate_pids(DiagnosticShims* shims, - DiagnosticRequest* request, DiagnosticPidEnumerationReceived callback) { - // before calling the callback, split up the received bytes into 1 or 2 byte - // chunks depending on the mode so the final pid list is actual 1 or 2 byte PIDs - // TODO request supported PIDs - request PID 0 and parse 4 bytes in response -} |