diff options
| -rw-r--r-- | app/app.pro | 4 | ||||
| -rwxr-xr-x | autobuild/agl/autobuild | 88 | ||||
| -rw-r--r-- | autobuild/linux/autobuild | 128 | ||||
| -rw-r--r-- | package/package.pro | 7 |
4 files changed, 168 insertions, 59 deletions
diff --git a/app/app.pro b/app/app.pro index eec6528..51a5abf 100644 --- a/app/app.pro +++ b/app/app.pro @@ -6,6 +6,10 @@ PKGCONFIG += qlibhomescreen qlibwindowmanager qtappfw-navigation qtappfw-signal- CONFIG += c++1z link_pkgconfig +CONFIG(release, debug|release) { + QMAKE_POST_LINK = $(STRIP) --strip-unneeded $(TARGET) +} + include(app.pri) SOURCES += \ diff --git a/autobuild/agl/autobuild b/autobuild/agl/autobuild index e87a1c3..bbbc13e 100755 --- a/autobuild/agl/autobuild +++ b/autobuild/agl/autobuild @@ -1,5 +1,6 @@ #!/usr/bin/make -f # Copyright (C) 2015 - 2018 "IoT.bzh" +# Copyright (C) 2020 Konsulko Group # Author "Romain Forlot" <romain.forlot@iot.bzh> # # Licensed under the Apache License, Version 2.0 (the "License"); @@ -15,44 +16,95 @@ # limitations under the License. THISFILE := $(lastword $(MAKEFILE_LIST)) -BUILD_DIR := $(abspath $(dir $(THISFILE))/../../build) -DEST := ${BUILD_DIR} +ROOT_DIR := $(abspath $(dir $(THISFILE))/../..) -.PHONY: all clean distclean configure build package help +# Build directories +# Note that the debug directory is defined in relation to the release +# directory (BUILD_DIR), this needs to be kept in mind if over-riding +# it and building that widget types, the specific widget type variable +# (e.g. BUILD_DIR_DEBUG) may also need to be specified to yield the +# desired output hierarchy. +BUILD_DIR = $(ROOT_DIR)/build +BUILD_DIR_DEBUG = $(abspath $(BUILD_DIR)/../build-debug) -all: help +# Output directory variable for use in pattern rules. +# This is intended for internal use only, hence the explicit override +# definition. +override OUTPUT_DIR = $(BUILD_DIR) + +# Final install directory for widgets +DEST = $(OUTPUT_DIR) + +# Default build type for release builds +BUILD_TYPE = release + +.PHONY: all help update install distclean +.PHONY: clean clean-release clean-debug clean-all +.PHONY: configure configure-release configure-debug +.PHONY: build build-release build-debug build-all +.PHONY: package package-release package-debug package-all help: @echo "List of targets available:" @echo "" @echo "- all" + @echo "- help" @echo "- clean" @echo "- distclean" @echo "- configure" @echo "- build: compilation, link and prepare files for package into a widget" @echo "- package: output a widget file '*.wgt'" - @echo "- install: install in your INSTALL_ROOT directory" + @echo "- install: install in $(DEST) directory" @echo "" @echo "Usage: ./autobuild/agl/autobuild package DEST=${HOME}/opt" @echo "Don't use your build dir as DEST as wgt file is generated at this location" -clean: - @([ -d ${BUILD_DIR} ] && make -C ${BUILD_DIR} ${CLEAN_ARGS} clean) || echo Nothing to clean +all: package-all + +# Target specific variable over-rides so static pattern rules can be +# used for the various type-specific targets. + +configure-debug build-debug package-debug clean-debug: OUTPUT_DIR = $(BUILD_DIR_DEBUG) +configure-debug build-debug package-debug: BUILD_TYPE = debug + +clean-release clean-debug: + @if [ -d $(OUTPUT_DIR) ]; then \ + $(MAKE) -C $(OUTPUT_DIR) $(CLEAN_ARGS) clean; \ + else \ + echo Nothing to clean; \ + fi + +clean: clean-release -distclean: - @([ -d ${BUILD_DIR} ] && make -C ${BUILD_DIR} distclean) || echo Nothing to distclean +clean-all: clean-release clean-debug -configure: - @[ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR} - @[ -f ${BUILD_DIR}/Makefile ] || (cd ${BUILD_DIR} && qmake ${CONFIGURE_ARGS} ..) +distclean: clean-all -build: configure - @make -C ${BUILD_DIR} ${BUILD_ARGS} all +configure-release configure-debug: + @mkdir -p $(OUTPUT_DIR) + @if [ ! -f $(OUTPUT_DIR)/Makefile ]; then \ + (cd $(OUTPUT_DIR) && qmake CONFIG+=$(BUILD_TYPE) $(CONFIGURE_ARGS) $(ROOT_DIR)); \ + fi + +configure: configure-release + +build-release build-debug: build-%: configure-% + @$(MAKE) -C $(OUTPUT_DIR) $(BUILD_ARGS) all + +build: build-release -package: build - @if [ "${DEST}" != "${BUILD_DIR}/$@" ]; then \ - mkdir -p ${DEST} && cp ${BUILD_DIR}/$@/*.wgt ${DEST}; \ +build-all: build-release build-debug + +package-release package-debug: package-%: build-% + @cp $(OUTPUT_DIR)/package/*.wgt $(OUTPUT_DIR)/ + @if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \ + mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \ fi + +package: package-release + +package-all: package-release package-debug + install: build - @make -C ${BUILD_DIR} ${INSTALL_ARGS} install + @$(MAKE) -C $(BUILD_DIR) $(INSTALL_ARGS) install diff --git a/autobuild/linux/autobuild b/autobuild/linux/autobuild index 569d692..bbbc13e 100644 --- a/autobuild/linux/autobuild +++ b/autobuild/linux/autobuild @@ -1,12 +1,13 @@ #!/usr/bin/make -f # Copyright (C) 2015 - 2018 "IoT.bzh" +# Copyright (C) 2020 Konsulko Group # Author "Romain Forlot" <romain.forlot@iot.bzh> # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # -# http://www.apache.org/licenses/LICENSE-2.0 +# http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, @@ -15,48 +16,95 @@ # limitations under the License. THISFILE := $(lastword $(MAKEFILE_LIST)) -BUILD_DIR := $(abspath $(dir $(THISFILE))/../../build) -DEST := ${BUILD_DIR} +ROOT_DIR := $(abspath $(dir $(THISFILE))/../..) -.PHONY: all clean distclean configure build package help update +# Build directories +# Note that the debug directory is defined in relation to the release +# directory (BUILD_DIR), this needs to be kept in mind if over-riding +# it and building that widget types, the specific widget type variable +# (e.g. BUILD_DIR_DEBUG) may also need to be specified to yield the +# desired output hierarchy. +BUILD_DIR = $(ROOT_DIR)/build +BUILD_DIR_DEBUG = $(abspath $(BUILD_DIR)/../build-debug) -all: help +# Output directory variable for use in pattern rules. +# This is intended for internal use only, hence the explicit override +# definition. +override OUTPUT_DIR = $(BUILD_DIR) + +# Final install directory for widgets +DEST = $(OUTPUT_DIR) + +# Default build type for release builds +BUILD_TYPE = release + +.PHONY: all help update install distclean +.PHONY: clean clean-release clean-debug clean-all +.PHONY: configure configure-release configure-debug +.PHONY: build build-release build-debug build-all +.PHONY: package package-release package-debug package-all help: - @echo "List of targets available:" - @echo "" - @echo "- all - @echo "- clean" - @echo "- distclean" - @echo "- configure" - @echo "- build: compilation, link and prepare files for package into a widget" - @echo "- package: output a widget file '*.wgt'" - @echo "- install: install in your defined DEST directory" - @echo "" - @echo "Usage: ./autobuild/agl/autobuild package DEST=${HOME}/opt" - @echo "Don't use your build dir as DEST as wgt file is generated at this location" - - clean: - @([ -d ${BUILD_DIR} ] && make -C ${BUILD_DIR} ${CLEAN_ARGS} clean) || echo Nothing to clean - -distclean: - @[ -d ${DEST} ] && find ${DEST} -name "*.wgt" -delete - @([ -d ${BUILD_DIR} ] && make -C ${BUILD_DIR} distclean) || echo Nothing to distclean - -configure: - @[ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR} - @[ -f ${BUILD_DIR}/Makefile ] || (cd ${BUILD_DIR} && qmake ${CONFIGURE_ARGS} ..) - -build: configure - @make -C ${BUILD_DIR} ${BUILD_ARGS} all - -package: build - @if [ "${DEST}" != "${BUILD_DIR}/$@" ]; then \ - mkdir -p ${DEST} && cp ${BUILD_DIR}/$@/*.wgt ${DEST}; \ - fi + @echo "List of targets available:" + @echo "" + @echo "- all" + @echo "- help" + @echo "- clean" + @echo "- distclean" + @echo "- configure" + @echo "- build: compilation, link and prepare files for package into a widget" + @echo "- package: output a widget file '*.wgt'" + @echo "- install: install in $(DEST) directory" + @echo "" + @echo "Usage: ./autobuild/agl/autobuild package DEST=${HOME}/opt" + @echo "Don't use your build dir as DEST as wgt file is generated at this location" -install: build - @if [ "${DEST}" != "${BUILD_DIR}" ]; then \ - mkdir -p ${DEST} && cp -rf ${BUILD_DIR}/package/root/* ${DEST}; \ - fi +all: package-all + +# Target specific variable over-rides so static pattern rules can be +# used for the various type-specific targets. + +configure-debug build-debug package-debug clean-debug: OUTPUT_DIR = $(BUILD_DIR_DEBUG) +configure-debug build-debug package-debug: BUILD_TYPE = debug + +clean-release clean-debug: + @if [ -d $(OUTPUT_DIR) ]; then \ + $(MAKE) -C $(OUTPUT_DIR) $(CLEAN_ARGS) clean; \ + else \ + echo Nothing to clean; \ + fi + +clean: clean-release + +clean-all: clean-release clean-debug + +distclean: clean-all +configure-release configure-debug: + @mkdir -p $(OUTPUT_DIR) + @if [ ! -f $(OUTPUT_DIR)/Makefile ]; then \ + (cd $(OUTPUT_DIR) && qmake CONFIG+=$(BUILD_TYPE) $(CONFIGURE_ARGS) $(ROOT_DIR)); \ + fi + +configure: configure-release + +build-release build-debug: build-%: configure-% + @$(MAKE) -C $(OUTPUT_DIR) $(BUILD_ARGS) all + +build: build-release + +build-all: build-release build-debug + +package-release package-debug: package-%: build-% + @cp $(OUTPUT_DIR)/package/*.wgt $(OUTPUT_DIR)/ + @if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \ + mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \ + fi + + +package: package-release + +package-all: package-release package-debug + +install: build + @$(MAKE) -C $(BUILD_DIR) $(INSTALL_ARGS) install diff --git a/package/package.pro b/package/package.pro index ae6921b..907d59c 100644 --- a/package/package.pro +++ b/package/package.pro @@ -13,7 +13,12 @@ copy_config.commands = $(COPY_FILE) \"$$replace(copy_config.depends, /, $$QMAKE_ QMAKE_EXTRA_TARGETS += copy_config PRE_TARGETDEPS += $$copy_config.target +WGT_TYPE = +CONFIG(debug, debug|release) { + WGT_TYPE = -debug +} + wgt.target = package -wgt.commands = wgtpkg-pack -f -o tbtnavi.wgt root +wgt.commands = wgtpkg-pack -f -o tbtnavi$${WGT_TYPE}.wgt root QMAKE_EXTRA_TARGETS += wgt |