Import from docs-agl/docs

Change-Id: Id524561d87410e5463cddd123b30eb63d75b62bd
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>

2 files changed, 0 insertions, 119 deletions

diff --git a/audio/4a-framework.md b/audio/4a-framework.md
deleted file mode 100644
index d54f12b..0000000
--- a/audio/4a-framework.md
+++ /dev/null
@@ -1,6 +0,0 @@
-# AGL Audio High Level Binding (4A)
-
-The Audio High Level Binding is the upper layer in the Audio 4A architecture.
-
-Presentation is available:
-[4a-presentation-by-audiokinetics](https://schd.ws/hosted_files/aglammeu17/aa/HighLevelAudio_DresdenAMM_Final_0.pdf)
diff --git a/audio/bluez-alsa.md b/audio/bluez-alsa.md
deleted file mode 100644
index bbdef77..0000000
--- a/audio/bluez-alsa.md
+++ /dev/null
@@ -1,113 +0,0 @@
-# bluez-alsa
-
-## Introduction
-
-Bluetooth Audio ALSA Backend allow bluetooth audio without PulseAudio.
-
-This project is a rebirth of a direct integration between Bluez and ALSA. Since Bluez >= 5, the build-in integration has been removed in favor of 3rd party audio applications. From now on, Bluez acts as a middleware between an audio application, which implements Bluetooth audio profile, and a Bluetooth audio device.
-
-github source : [bluez-alsa](https://github.com/Arkq/bluez-alsa)
-
-## Add bluez-alsa to an AGL image
-
-You can add bluez-alsa to your image
-
-```yocto
-IMAGE_INSTALL_append = "bluez-alsa"
-```
-
-## Check bluez-alsa status
-
-You can check the bluez-alsa status by running:
-
-```bash
-systemctl status bluez-alsa.service
-```
-
-## Stop pulseaudio
-
-You must disable pulseaudio if you want to use bluez-alsa
-
-```bash
-systemctl --user stop pulseaudio
-```
-
-or disable pulseaudio bluetooth support
-
-```bash
-vi /etc/pulse/default.pa
-#.ifexists module-bluetooth-policy.so
-#load-module module-bluetooth-policy
-#.endif
-
-#.ifexists module-bluetooth-discover.so
-#load-module module-bluetooth-discover
-#.endif
-```
-
-## Connect your Bluetooth device
-
-You need to connect a bluetooth device
-
-```bash
-$ bluetoothctl
-[bluetooth]# pair ${BT_ADDR}
-[bluetooth]# connect ${BT_ADDR}
-[bluetooth]# info ${BT_ADDR}
-```
-
-Here somes documentation links:
-
-* [Bluetooth headset from archlinux](https://wiki.archlinux.org/index.php/Bluetooth_headset)
-* [Bluetooth Headset from gentoo](https://wiki.gentoo.org/wiki/Bluetooth_Headset)
-* [Bluez A2DP AudioSink for ALSA](http://www.lightofdawn.org/blog/?viewDetailed=00032)
-* [Bluez A2DP](http://www.lightofdawn.org/wiki/wiki.cgi/BluezA2DP)
-
-## Test bluez-alsa speacker
-
-```bash
-wget http://www.kozco.com/tech/piano2.wav
-
-aplay -D bluealsa:HCI=hci0,DEV=${BT_ADDR},PROFILE=a2dp ./piano2.wav
-```
-
-## Add bluez-alsa pcm config to alsa
-
-```bash
-vi /etc/asound.conf
-# Bluetooth headset
-pcm.btheadset {
-        type plug
-        slave.pcm {
-                type bluealsa
-                device "${BT_ADDR}"
-                profile "a2dp"
-        }
-        hint {
-                show on
-                description "Bluetooth Audio ALSA Backend"
-        }
-}
-```
-
-Doc [asoundrc](https://alsa.opensrc.org/Asoundrc)
-
-Test bluez-alsa pcm
-
-```bash
-aplay -D btheadset ./piano2.wav
-```
-
-## Test gstreamer player
-
-```bash
-gst-launch-1.0 uridecodebin uri=file:///mnt/Holy-Mountain.mp3  ! alsasink device=btheadset
-```
-
-## Test bluez-alsa phone
-
-After connected your phone with bluez:
-
-```bash
-bluealsa-aplay ${BT_ADDR}
-```