Import from docs-agl/docs

Change-Id: Id524561d87410e5463cddd123b30eb63d75b62bd
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>

1 files changed, 89 insertions, 0 deletions

diff --git a/docs/security-blueprint/part-2/2-Communication-modes.md b/docs/security-blueprint/part-2/2-Communication-modes.md
new file mode 100644
index 0000000..268da5d
--- /dev/null
+++ b/docs/security-blueprint/part-2/2-Communication-modes.md
@@ -0,0 +1,89 @@
+# Communication modes
+
+## Disable USB, Serial and DOCSIS Support
+
+To disable USB support in U-Boot, following config's shall not be defined:
+
+```
+CONFIG_CMD_USB: Enables basic USB support and the usb command.
+CONFIG_USB_UHCI: Defines the lowlevel part.
+CONFIG_USB_KEYBOARD: Enables the USB Keyboard.
+CONFIG_USB_STORAGE: Enables the USB storage devices.
+CONFIG_USB_HOST_ETHER: Enables USB Ethernet adapter support.
+```
+
+In addition, disable unnecessary communication modes like Ethernet, Serial
+ports, DOCSIS in U-Boot and sboot that are not necessary.
+
+Linux Kernel support for USB should be compiled-out if not required. If it is
+needed, the Linux Kernel should be configured to only enable the minimum
+required USB devices. User-initiated USB-filesystems should be treated with
+special care. Whether or not the filesystems are mounted in userspace
+(**FUSE**), restricted mount options should be observed.
+
+<!-- section-config -->
+
+Domain               | Communication modes       | _State_
+-------------------- | ------------------------- | --------------------------------------------------------------------------------------------------------------------------------------
+Boot-Communication-1 | `USB`                     | _Disabled_ and _Compiled-out_ if not required.
+Boot-Communication-2 | `USB`                     | Else, Kernel should be configured to only enable the minimum required USB devices and filesystems should be treated with special care.
+Boot-Communication-3 | `Ethernet`                | _Disabled_
+Boot-Communication-4 | U-boot and sboot `DOCSIS` | _Disabled_
+Boot-Communication-5 | `Serial ports`            | _Disabled_
+
+<!-- end-section-config --> <!-- section-config -->
+
+Domain                   | `Config` name           | _State_
+------------------------ | ----------------------- | -------------
+Boot-Communication-USB-1 | `CONFIG_CMD_USB`        | _Not defined_
+Boot-Communication-USB-2 | `CONFIG_USB_UHCI`       | _Not defined_
+Boot-Communication-USB-3 | `CONFIG_USB_KEYBOARD`   | _Not defined_
+Boot-Communication-USB-4 | `CONFIG_USB_STORAGE`    | _Not defined_
+Boot-Communication-USB-5 | `CONFIG_USB_HOST_ETHER` | _Not defined_
+
+<!-- end-section-config -->
+
+--------------------------------------------------------------------------------
+
+## Disable all unused Network Interfaces
+
+Only used network interfaces should be enabled.
+Where possible, services should also be limited to those necessary.
+
+<!-- section-config -->
+
+Domain               | Communication modes  | _State_
+-------------------- | -------------------- | ---------------------------------------------------------------------------------------------
+Boot-Communication-1 | `Network interfaces` | Preferably _no network interface is allowed_, otherwise, restrict the services to those used.
+
+<!-- end-section-config -->
+
+## Remove or Disable Unnecessary Services, Ports, and Devices
+
+Restrict the `services`, `ports` and `devices` to those used.
+
+<!-- section-config -->
+
+Domain               | Object                            | Recommendations
+-------------------- | --------------------------------- | -------------------------------------------------------------
+Boot-Communication-1 | `Services`, `ports` and `devices` | Restrict the `services`, `ports` and `devices` to those used.
+
+<!-- end-section-config -->
+
+## Disable flash access
+
+**Recommendation**:
+
+In U-Boot following flash memory commands shall be disabled:
+
+**NAND**: Support for nand flash access available through `do_nand` has to be disabled.
+
+<!-- section-config -->
+
+Domain                     | `Command` name | _State_
+-------------------------- | -------------- | ---------
+Boot-Communication-Flash-1 | `do_nand`      | _Disable_
+
+<!-- end-section-config -->
+
+Similarly sboot should disable flash access support through command line if any.