diff options
-rw-r--r-- | getting-started/machines/R-Car-Starter-Kit-gen3.md | 7 |
1 files changed, 5 insertions, 2 deletions
diff --git a/getting-started/machines/R-Car-Starter-Kit-gen3.md b/getting-started/machines/R-Car-Starter-Kit-gen3.md index 1631c51..1a8320a 100644 --- a/getting-started/machines/R-Car-Starter-Kit-gen3.md +++ b/getting-started/machines/R-Car-Starter-Kit-gen3.md @@ -25,7 +25,7 @@ Before setting up the build environment, you need to download the proprietary dr * Download Renesas graphics drivers with a "click through" license from Renesas website [Link][rcar Linux Drivers] * Under the Target hardware: **R-Car H3/M3** section. - + #### Note: * You have to register with a free account on MyRenesas and accept the license conditions before downloading them the drivers. @@ -215,7 +215,7 @@ sudo fdisk /dev/sdc * Initialize the ext4 partition using “mke2fs”; for example, if the microSD card is associated with *sdc*: ``` -sudo mke2fs -t ext4 /dev/sdc1 +sudo mke2fs -t ext4 -O ^64bits /dev/sdc1 mke2fs 1.42.13 (17-May-2015) Creating filesystem with 3911168 4k blocks and 979200 inodes @@ -229,6 +229,9 @@ sudo mke2fs -t ext4 /dev/sdc1 Writing superblocks and filesystem accounting information: done ``` +> **CAUTION**: Gen3 boards don't understand 64bits blocks used when filesystem +> is formated with *64bits* feature so make sure you don't use it. + ### Copying the built image to the SD-card Insert the SD-card into your build host: |