diff options
| -rw-r--r-- | docs/getting-started/machines/renesas.md | 16 |
1 files changed, 9 insertions, 7 deletions
diff --git a/docs/getting-started/machines/renesas.md b/docs/getting-started/machines/renesas.md index 88bdc92..a0ca5d8 100644 --- a/docs/getting-started/machines/renesas.md +++ b/docs/getting-started/machines/renesas.md @@ -664,6 +664,7 @@ Hit any key to stop autoboot: 0 => ``` ## 9. Setting-up U-boot + ### Configuring U-Boot Parameters Follow these steps to configure the board to use the MicroSD card as the @@ -685,7 +686,7 @@ boot device and also to set the screen resolution: bootdelay=3 fdt_high=0xffffffffffffffff initrd_high=0xffffffffffffffff - load_dtb=ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-h3ulcb.dtb + load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a7795-h3ulcb.dtb load_ker=ext4load mmc 0:1 0x48080000 /boot/Image stderr=serial stdin=serial @@ -706,7 +707,7 @@ boot device and also to set the screen resolution: fdt_high=0xffffffffffffffff filesize=cdeb initrd_high=0xffffffffffffffff - load_dtb=ext4load mmc 0:1 0x48000000 /boot/Image-r8a7796-m3ulcb.dtb + load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a7796-m3ulcb.dtb load_ker=ext4load mmc 0:1 0x48080000 /boot/Image stderr=serial stdin=serial @@ -731,31 +732,31 @@ boot device and also to set the screen resolution: **h3ulcb with BSP version greater than or equal to 2.19**: ``` - setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-es1-h3ulcb.dtb + setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7795-es1-h3ulcb.dtb ``` **h3ulcb with BSP version less than 2.19**: ``` - setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-h3ulcb.dtb + setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7795-h3ulcb.dtb ``` **m3ulcb**: ```bash - setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7796-m3ulcb.dtb + setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7796-m3ulcb.dtb ``` **m3ulcb with a Kingfisher board**: ```bash - setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7796-m3ulcb-kf.dtb + setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7796-m3ulcb-kf.dtb ``` **h3ulcb with a Kingfisher board**: ```bash - setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-es1-h3ulcb-kf.dtb + setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7795-es1-h3ulcb-kf.dtb ``` 5. Save the boot environment: @@ -770,6 +771,7 @@ boot device and also to set the screen resolution: run bootcmd ``` ## 10. Troubleshooting + ### Logging Into the Console Once the board boots, you should see the |