summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--docs/getting-started/machines/renesas.md16
1 files changed, 9 insertions, 7 deletions
diff --git a/docs/getting-started/machines/renesas.md b/docs/getting-started/machines/renesas.md
index 88bdc92..a0ca5d8 100644
--- a/docs/getting-started/machines/renesas.md
+++ b/docs/getting-started/machines/renesas.md
@@ -664,6 +664,7 @@ Hit any key to stop autoboot: 0
=>
```
## 9. Setting-up U-boot
+
### Configuring U-Boot Parameters
Follow these steps to configure the board to use the MicroSD card as the
@@ -685,7 +686,7 @@ boot device and also to set the screen resolution:
bootdelay=3
fdt_high=0xffffffffffffffff
initrd_high=0xffffffffffffffff
- load_dtb=ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-h3ulcb.dtb
+ load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a7795-h3ulcb.dtb
load_ker=ext4load mmc 0:1 0x48080000 /boot/Image
stderr=serial
stdin=serial
@@ -706,7 +707,7 @@ boot device and also to set the screen resolution:
fdt_high=0xffffffffffffffff
filesize=cdeb
initrd_high=0xffffffffffffffff
- load_dtb=ext4load mmc 0:1 0x48000000 /boot/Image-r8a7796-m3ulcb.dtb
+ load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a7796-m3ulcb.dtb
load_ker=ext4load mmc 0:1 0x48080000 /boot/Image
stderr=serial
stdin=serial
@@ -731,31 +732,31 @@ boot device and also to set the screen resolution:
**h3ulcb with BSP version greater than or equal to 2.19**:
```
- setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-es1-h3ulcb.dtb
+ setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7795-es1-h3ulcb.dtb
```
**h3ulcb with BSP version less than 2.19**:
```
- setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-h3ulcb.dtb
+ setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7795-h3ulcb.dtb
```
**m3ulcb**:
```bash
- setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7796-m3ulcb.dtb
+ setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7796-m3ulcb.dtb
```
**m3ulcb with a Kingfisher board**:
```bash
- setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7796-m3ulcb-kf.dtb
+ setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7796-m3ulcb-kf.dtb
```
**h3ulcb with a Kingfisher board**:
```bash
- setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-es1-h3ulcb-kf.dtb
+ setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7795-es1-h3ulcb-kf.dtb
```
5. Save the boot environment:
@@ -770,6 +771,7 @@ boot device and also to set the screen resolution:
run bootcmd
```
## 10. Troubleshooting
+
### Logging Into the Console
Once the board boots, you should see the