summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--docs/getting-started/machines/raspberrypi.md64
1 files changed, 39 insertions, 25 deletions
diff --git a/docs/getting-started/machines/raspberrypi.md b/docs/getting-started/machines/raspberrypi.md
index 732d311..bc58368 100644
--- a/docs/getting-started/machines/raspberrypi.md
+++ b/docs/getting-started/machines/raspberrypi.md
@@ -1,17 +1,17 @@
-# Building for Raspberry PI 3 or 4
+# Building for Raspberry Pi 3 or 4
The
-[Raspberry PI](https://www.raspberrypi.org/help/what-%20is-a-raspberry-pi/) is a small
+[Raspberry Pi](https://www.raspberrypi.org/help/what-%20is-a-raspberry-pi/) is a small
computer that is ideal for learning computing and computer languages.
The AGL Project supports building images for the
-[Raspberry PI 3](https://www.raspberrypi.org/products/raspberry-pi-3-model-a-plus/) and the
-[Raspberry PI 4](https://www.raspberrypi.org/products/raspberry-pi-4-model-b/) boards.
+[Raspberry Pi 3](https://www.raspberrypi.org/products/raspberry-pi-3-model-a-plus/) and the
+[Raspberry Pi 4](https://www.raspberrypi.org/products/raspberry-pi-4-model-b/) boards.
Each of these boards comes in a variety of models.
See the
-[Raspberry PI Product Page](https://www.raspberrypi.org/products/) for more information.
+[Raspberry Pi Product Page](https://www.raspberrypi.org/products/) for more information.
This section describes the steps you need to take to build the
-AGL demo image for both the Raspberry PI 3 and 4 boards.
+AGL demo image for both the Raspberry Pi 3 and 4 boards.
## 1. Making Sure Your Build Environment is Correct
@@ -19,21 +19,21 @@ The
"[Initializing Your Build Environment](../image-workflow-initialize-build-environment.html)"
section presented generic information for setting up your build environment
using the `aglsetup.sh` script.
-If you are building the AGL demo image for a Raspberry PI board, you need to specify some
+If you are building the AGL demo image for a Raspberry Pi board, you need to specify some
specific options when you run the script.
Use the following commands to initialize your build environment.
In each case, the "-m" option specifies the machine and the
list of AGL features used with script are appropriate for development of
-the AGL demo image suited for either Raspberry PI 3 or 4:
+the AGL demo image suited for either Raspberry Pi 3 or 4:
-**Raspberry PI 3**:
+**Raspberry Pi 3**:
```bash
$ source meta-agl/scripts/aglsetup.sh -m raspberrypi3 agl-demo agl-netboot agl-appfw-smack
```
-**Raspberry PI 4**:
+**Raspberry Pi 4**:
```bash
$ source meta-agl/scripts/aglsetup.sh -m raspberrypi4 agl-demo agl-netboot agl-appfw-smack
@@ -48,7 +48,7 @@ The
section highlights some common configurations that are useful when
building any AGL image.
-For the Raspberry PI platforms, you need to take an additional
+For the Raspberry Pi platforms, you need to take an additional
configuration step if you want to include any packages under a
commercial license.
@@ -70,7 +70,7 @@ IMAGE_INSTALL_append = " libomxil"
This section shows the `bitbake` command used to build the AGL image.
Before running BitBake to start your build, it is good to be reminded that AGL
-does provide a pre-built image for developers that want to use the Raspberry PI 3
+does provide a pre-built image for developers that want to use the Raspberry Pi 3
board.
You can find this pre-built image on the
[AGL Download web site](https://download.automotivelinux.org/AGL/release).
@@ -95,21 +95,21 @@ $ bitbake agl-demo-platform
```
By default, the build process puts the resulting image in the Build Directory.
-Here is example for the Raspberry PI 4 board:
+Here is example for the Raspberry Pi 4 board:
```
<build_directory>/tmp/deploy/images/raspberrypi4/agl-demo-platform-raspberrypi4.wic.xz
```
-If you build for the Raspberry PI 3 board, the location uses "raspberrypi3" in the path.
+If you build for the Raspberry Pi 3 board, the location uses "raspberrypi3" in the path.
## 4. Deploying the AGL Demo Image
Deploying the AGL demo image consists of copying the image on a MicroSD card,
-plugging the card into the Raspberry PI board, and then booting the board.
+plugging the card into the Raspberry Pi board, and then booting the board.
Follow these steps to copy the image to a MicroSD card and boot
-the image on the Raspberry PI 3 or 4 board:
+the image on the Raspberry Pi 3 or 4 board:
1. Plug your MicroSD card into your Build Host (i.e. the system that has your build output).
@@ -162,8 +162,8 @@ the image on the Raspberry PI 3 or 4 board:
3. Now that you know the device name, unmount the device and use the
`xzcat` command to copy the image to the MicroSD card.
- **NOTE:** For Raspberry PI 3, the image is at `build/tmp/deploy/images/raspberrypi3/agl-demo-platform-raspberrypi3.wic.xz`.
- For Raspberry PI 4, the image is at `build/tmp/deploy/images/raspberrypi4/agl-demo-platform-raspberrypi4.wic.xz`.
+ **NOTE:** For Raspberry Pi 3, the image is at `build/tmp/deploy/images/raspberrypi3/agl-demo-platform-raspberrypi3.wic.xz`.
+ For Raspberry Pi 4, the image is at `build/tmp/deploy/images/raspberrypi4/agl-demo-platform-raspberrypi4.wic.xz`.
Be sure you are root, provide the actual device name for *sdcard_device_name*, and the actual
image name for *image_name*:
@@ -174,12 +174,12 @@ the image on the Raspberry PI 3 or 4 board:
$ sync
```
-4. Plug your MicroSD card into the Raspberry PI board and boot the device.
+4. Plug your MicroSD card into the Raspberry Pi board and boot the device.
-## 5. Using the Raspberry PI Touch Display
+## 5. Using the Raspberry Pi Touch Display
If you have connected the official
-[Raspberry PI Touch Display](https://www.raspberrypi.org/products/raspberry-pi-touch-display/),
+[Raspberry Pi Touch Display](https://www.raspberrypi.org/products/raspberry-pi-touch-display/),
you can configure the display by editing the `weston.ini` file.
Plenty of information exists on how to configure and use this touchscreen.
@@ -224,9 +224,9 @@ transform=270
## 6. Debugging
-When things go wrong, you can take steps to debug your Raspberry PI.
+When things go wrong, you can take steps to debug your Raspberry Pi.
For debugging, you need a 3.3 Volt USB Serial cable to fascilitate
-communication between your Raspberry PI board and your build host.
+communication between your Raspberry Pi board and your build host.
A good cable to use is the 3.3V USB-to-Serial cable
[Olimex USB-Serial-Cable-F](https://www.olimex.com/Products/Components/Cables/USB-Serial-Cable/USB-Serial-Cable-F/).
@@ -243,7 +243,7 @@ You can reference the following diagram for information on the following steps:
</p>
1. Connect the Olimex cable to the Universal Asynchronous Receiver-Transmitter
- (UART) connection on your Raspberry PI board.
+ (UART) connection on your Raspberry Pi board.
Do not connect the USB side of the cable to your build host at this time.
**CAUTION:** No warranty is provided using the following procedure.
@@ -261,10 +261,24 @@ You can reference the following diagram for information on the following steps:
5. Plug the USB connector of the cable into your build host's USB port.
6. Use your favorite tool for serial communication between your build host
- and your Raspberry PI.
+ and your Raspberry Pi.
For example, if your build host is a native Linux machine (e.g. Ubuntu)
you could use `screen` as follows from a terminal on the build host:
```bash
$ sudo screen /dev/ttyUSB0 115200
```
+
+## 7. SOTA
+
+Follow the step below to build AGL for Raspberry Pi with enabled software over
+the air (SOTA) updates:
+
+1. Include **agl-sota** feature.
+
+2. In **bblayers.conf** replace meta-updater-qemux86-64 with
+ **meta-updater-raspberrypi**.
+
+3. In **local.conf** set `SOTA_PACKED_CREDENTIALS` and `OSTREE_BRANCHNAME`.
+
+More details are available [here](https://docs.ota.here.com/getstarted/dev/raspberry-pi.html).