diff options
Diffstat (limited to 'docs/getting-started/machines/R-Car-Starter-Kit-gen3.md')
| -rw-r--r-- | docs/getting-started/machines/R-Car-Starter-Kit-gen3.md | 21 |
1 files changed, 11 insertions, 10 deletions
diff --git a/docs/getting-started/machines/R-Car-Starter-Kit-gen3.md b/docs/getting-started/machines/R-Car-Starter-Kit-gen3.md index 42bda8b..ad3a84a 100644 --- a/docs/getting-started/machines/R-Car-Starter-Kit-gen3.md +++ b/docs/getting-started/machines/R-Car-Starter-Kit-gen3.md @@ -417,7 +417,7 @@ Hit any key to stop autoboot: 0 * For machine m3ulcb: -``` +```bash NOTICE: BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.14 NOTICE: BL2: PRR is R-Car M3 Ver1.0 NOTICE: BL2: Board is Starter Kit Rev1.0 @@ -465,7 +465,7 @@ Follow the steps below to configure the boot from microSD card and to set screen * Type **printenv** to check if you have correct parameters for booting your board: * Example for a h3ulcb: - ``` + ```bash => printenv baudrate=115200 bootargs=console=ttySC0,115200 root=/dev/mmcblk1p1 rootwait ro rootfstype=ext4 @@ -485,7 +485,7 @@ Follow the steps below to configure the boot from microSD card and to set screen * Example for a m3ulcb: - ``` + ```bash => printenv baudrate=115200 bootargs=console=ttySC0,115200 root=/dev/mmcblk1p1 rootwait ro rootfstype=ext4 @@ -506,25 +506,27 @@ Follow the steps below to configure the boot from microSD card and to set screen * To boot on a sd card, it is recommended to set your environment using these commands : - ``` + ```bash setenv bootargs console=ttySC0,115200 ignore_loglevel vmalloc=384M video=HDMI-A-1:1920x1080-32@60 root=/dev/mmcblk1p1 rw rootfstype=ext4 rootwait rootdelay=2 ``` - ``` + + ```bash setenv bootcmd run load_ker\; run load_dtb\; booti 0x48080000 - 0x48000000 ``` - ``` + + ```bash setenv load_ker ext4load mmc 0:1 0x48080000 /boot/Image ``` * For machine h3ulcb (BSP >= 2.19): - ``` + ```bash setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-es1-h3ulcb.dtb ``` * For machine h3ulcb (BSP < 2.19): - ``` + ```bash setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-h3ulcb.dtb ``` @@ -554,7 +556,7 @@ Follow the steps below to configure the boot from microSD card and to set screen * Now you can boot: -``` +```bash run bootcmd ``` @@ -628,4 +630,3 @@ PRETTY_NAME="Automotive Grade Linux 3.0.0+snapshot-20161202 (chinook)" [Iot.bzh AGL-Devkit-Image-and-SDK-for-Porter]: http://docs.automotivelinux.org/docs/devguides/en/dev/reference/iotbzh2016/sdk/AGL-Devkit-Image-and-SDK-for-porter.pdf [Iot.bzh AGL-Devkit-Build-your-1st-AGL-Application]: http://docs.automotivelinux.org/docs/devguides/en/dev/reference/iotbzh2016/sdk/AGL-Devkit-Build-your-1st-AGL-Application.pdf [Iot.bzh AGL_Phase2-Devkit-HowTo_bake_a_service]: http://docs.automotivelinux.org/docs/devguides/en/dev/reference/iotbzh2016/bsp/AGL_Phase2-Devkit-HowTo_bake_a_service.pdf - |