diff options
Diffstat (limited to 'docs/getting-started/machines/raspberrypi.md')
| -rw-r--r-- | docs/getting-started/machines/raspberrypi.md | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/docs/getting-started/machines/raspberrypi.md b/docs/getting-started/machines/raspberrypi.md new file mode 100644 index 0000000..e016584 --- /dev/null +++ b/docs/getting-started/machines/raspberrypi.md @@ -0,0 +1,39 @@ +# Building the AGL Demo Platform for Raspberry Pi + +## Raspberry Pi 3 + +To build AGL demo platform for Raspberry Pi 3 use machine **raspberrypi3** and feature **agl-demo**: + +```bash +source meta-agl/scripts/aglsetup.sh -m raspberrypi3 agl-demo agl-netboot agl-appfw-smack +bitbake agl-demo-platform +``` + +## Raspberry Pi 2 + +To build AGL demo platform for Raspberry Pi 2 use machine **raspberrypi2** and feature **agl-demo**: + +```bash +source meta-agl/scripts/aglsetup.sh -m raspberrypi2 agl-demo agl-netboot agl-appfw-smack +bitbake agl-demo-platform +``` + +## Booting AGL Demo Platform on Raspberry Pi + +Follow the steps below to copy the image to microSD card and to boot it on Raspberry Pi 2 or 3: + +* Connect your sdcard in your linux machine. +* Copy output image from build machine to linux machine that is connected your sdcard. (Often, those are same machines) +* Output Image location in build machine for Raspberry Pi 2: *tmp/deploy/images/raspberrypi2/agl-demo-platform-raspberrypi2.wic.xz* +* Output Image location in build machine for Raspberry Pi 3: *tmp/deploy/images/raspberrypi3/agl-demo-platform-raspberrypi3.wic.xz* +* Unmount the microSD card and after that flash output image to it card with root user: + +*Note: the sdimage files can also be named rpi-sdimg-ota in case you have the **"agl-sota"** feature enabled* + +```bash +sudo umount [sdcard device] +xzcat [output image] | sudo dd of=[sdcard device] bs=4M +sync +``` + +* Plug your microSD card into Raspberry Pi 2 or 3 and boot the board |