3 files changed, 7 insertions, 7 deletions
diff --git a/docs/getting-started/machines/intel.md b/docs/getting-started/machines/intel.md
index 2a7eddb..bd55fdc 100644
--- a/docs/getting-started/machines/intel.md
+++ b/docs/getting-started/machines/intel.md
@@ -5,13 +5,13 @@ you can use the information found on the "[MinnowBoard wiki](https://minnowboard
 to enable most 64-bit Intel Architecture (IA) platforms that use the 64-bit
 UEFI as the boot loader.
 In addition to the MinnowBoard, support for the
-[upCore & UpSquared boards](http://www.up-board.org/upsquared/) exists.
+[upCore & UpSquared boards](http://up-board.org/upsquared/specifications/) exists.
 MinnowBoard Max and Turbot are both 64-bit capable.
 
 If you are interested in creating ***applications*** to run on hardware booted
 using an image built with the AGL Project, see the following:
 
-* [Application Development Workflow](../app-workflow-intro.html/overview)
+* [Application Development Workflow](../app-workflow-intro.html)
 * [Developing Apps for AGL](https://wiki.automotivelinux.org/agl-distro/developer_resources_intel_apps)
 
 UEFI has significantly evolved and you should check that your hardware's
@@ -35,7 +35,7 @@ platforms:
 ## 1. Making Sure Your Build Environment is Correct
 
 The
-"[Initializing Your Build Environment](../image-workflow-initialize-build-environment.html/Initializing-your-build-environment)"
+"[Initializing Your Build Environment](../image-workflow-initialize-build-environment.html)"
 section presented generic information for setting up your build environment
 using the `aglsetup.sh` script.
 If you are building for an Intel 64-bit platform, you need to specify some
@@ -200,7 +200,7 @@ To do so, requires the following steps:
 2. **Rebuild Your Image**
 
    Rebuild the AGL image by following the instructions in the
-   "[Using BitBake](./machines/intel.html#using-bitbake)"
+   "[Using BitBake](../machines/intel.html#2-using-bitbake)"
    step of this page.
 
 3. **Install the Rebuilt Image Onto a Removable Device**
diff --git a/docs/getting-started/machines/qemu.md b/docs/getting-started/machines/qemu.md
index f7e837d..459725e 100644
--- a/docs/getting-started/machines/qemu.md
+++ b/docs/getting-started/machines/qemu.md
@@ -10,7 +10,7 @@ VirtualBox.
 ## 1. Making Sure Your Build Environment is Correct
 
 The
-"[Initializing Your Build Environment](../image-workflow-initialize-build-environment.html/Initializing-your-build-environment)"
+"[Initializing Your Build Environment](../image-workflow-initialize-build-environment.html)"
 section presented generic information for setting up your build environment
 using the `aglsetup.sh` script.
 If you are building the AGL demo image for emulation, you need to specify some
diff --git a/docs/getting-started/machines/raspberrypi.md b/docs/getting-started/machines/raspberrypi.md
index ce9337c..76e3929 100644
--- a/docs/getting-started/machines/raspberrypi.md
+++ b/docs/getting-started/machines/raspberrypi.md
@@ -16,7 +16,7 @@ AGL demo image for both the Raspberry PI 2 and 3 boards.
 ## 1. Making Sure Your Build Environment is Correct
 
 The
-"[Initializing Your Build Environment](../image-workflow-initialize-build-environment.html/Initializing-your-build-environment)"
+"[Initializing Your Build Environment](../image-workflow-initialize-build-environment.html)"
 section presented generic information for setting up your build environment
 using the `aglsetup.sh` script.
 If you are building the AGL demo image for a Raspberry PI board, you need to specify some
@@ -44,7 +44,7 @@ $ source meta-agl/scripts/aglsetup.sh -m raspberrypi3 agl-demo agl-netboot agl-a
 Before launching the build, it is good to be sure your build
 configuration is set up correctly (`/build/conf/local.conf` file).
 The
-"[Customizing Your Build](./image-workflow-cust-build.html)"
+"[Customizing Your Build](../image-workflow-cust-build.html)"
 section highlights some common configurations that are useful when
 building any AGL image.