summaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/getting-started/machines/renesas.md128
1 files changed, 72 insertions, 56 deletions
diff --git a/docs/getting-started/machines/renesas.md b/docs/getting-started/machines/renesas.md
index e1f13e7..c6733dd 100644
--- a/docs/getting-started/machines/renesas.md
+++ b/docs/getting-started/machines/renesas.md
@@ -130,7 +130,8 @@ Follow these steps to download the drivers you need:
| AGL Version| Renesas version |
|:-:|:-:|
| AGL master | 3.21.0 |
- | AGL halibut 8.0.2 8.0.3 8.0.4 | 3.21.0 |
+ | AGL icefish 9.0.0 | 3.21.0 |
+ | AGL halibut 8.0.2 8.0.3 8.0.4 8.0.5 | 3.21.0 |
| AGL halibut 8.0.1 | 3.19.0 |
| AGL halibut 8.0.0 | 3.15.0 |
| AGL guppy 7.0.4 | 3.21.0 |
@@ -708,19 +709,20 @@ Hit any key to stop autoboot: 0
Follow these steps to configure the board to use the MicroSD card as the
boot device and also to set the screen resolution:
-1. As the board is powering up, press any key to stop the autoboot process.
+<ol>
+ <li>As the board is powering up, press any key to stop the autoboot process.
You need to press a key quickly as you have just a few seconds in which to
press a key.
+ </li>
-2. Once the autoboot process is interrupted, use the board's serial console to
- enter **printenv** to check if you have correct parameters for booting your board:
-
- <details>
- <summary>
- Here is an example using the **h3ulcb** board:
- </summary>
- <pre>
- <code>
+ <li>Once the autoboot process is interrupted, use the board's serial console to
+ enter <b>printenv</b> to check if you have correct parameters for booting your board:
+<details>
+ <summary>
+ Here is an example using the <b>h3ulcb</b> board:
+ </summary>
+ <pre>
+ <code>
=> printenv
baudrate=115200
@@ -737,15 +739,15 @@ stdout=serial
ver=U-Boot 2015.04 (Jun 09 2016 - 19:21:52)
Environment size: 648/131068 bytes
- </code>
- </pre>
- </details>
- <details>
- <summary>
- Here is a second example using the **m3ulcb** board:
- </summary>
- <pre>
- <code>
+ </code>
+ </pre>
+</details>
+<details>
+ <summary>
+ Here is a second example using the <b>m3ulcb</b> board:
+ </summary>
+ <pre>
+ <code>
=> printenv
baudrate=115200
bootargs=console=ttySC0,115200 root=/dev/mmcblk1p1 rootwait ro rootfstype=ext4
@@ -762,63 +764,76 @@ stdout=serial
ver=U-Boot 2015.04 (Nov 30 2016 - 18:25:18)
Environment size: 557/131068 bytes
- </code>
- </pre>
- </details>
+ </code>
+ </pre>
+</details>
+ </li>
-3. To boot your board using the MicroSD card, be sure your environment is set up
+ <li>To boot your board using the MicroSD card, be sure your environment is set up
as follows:
- ```bash
+ <pre>
+ <code>
setenv bootargs console=ttySC0,115200 ignore_loglevel vmalloc=384M video=HDMI-A-1:1920x1080-32@60 root=/dev/mmcblk1p1 rw rootfstype=ext4 rootwait rootdelay=2
setenv bootcmd run load_ker\; run load_dtb\; booti 0x48080000 - 0x48000000
setenv load_ker ext4load mmc 0:1 0x48080000 /boot/Image
- ```
+ </code>
+ </pre>
+ </li>
-4. Depending on the board type, the BSP version, and the existence of
- a Kingfisher board, make sure your ``load_dtb`` is set as follows:
+ <li>Depending on the board type, the BSP version, and the existence of
+ a Kingfisher board, make sure your ``load_dtb`` is set as follows:<br>
- **h3ulcb with BSP version greater than or equal to 2.19**:
+ <b>h3ulcb with BSP version greater than or equal to 2.19</b>:
- ```bash
+ <pre>
+ <code>
setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7795-es1-h3ulcb.dtb
- ```
+ </code>
+ </pre>
- **h3ulcb with BSP version less than 2.19**:
+ <b>h3ulcb with BSP version less than 2.19</b>:
- ```bash
+ <pre>
+ <code>
setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7795-h3ulcb.dtb
- ```
-
- **m3ulcb**:
+ </code>
+ </pre>
- ```bash
+ <b>m3ulcb</b>:
+ <pre>
+ <code>
setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7796-m3ulcb.dtb
- ```
-
- **m3ulcb with a Kingfisher board**:
+ </code>
+ </pre>
- ```bash
+ <b>m3ulcb with a Kingfisher board</b>:
+ <pre>
+ <code>
setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7796-m3ulcb-kf.dtb
- ```
-
- **h3ulcb with a Kingfisher board**:
+ </code>
+ </pre>
- ```bash
+ <b>h3ulcb with a Kingfisher board</b>:
+ <pre>
+ <code>
setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7795-es1-h3ulcb-kf.dtb
- ```
-
-5. Save the boot environment:
-
- ```bash
- saveenv
- ```
+ </code>
+ </pre>
+ </li>
-6. Boot the board:
+ <li>Save the boot environment:<br>
+ <code>
+ saveenv
+ </code>
+ </li>
-```bash
-run bootcmd
-```
+ <li>Boot the board:<br>
+ <code>
+ run bootcmd
+ </code>
+ </li>
+</ol>
## 10. Troubleshooting
@@ -896,3 +911,4 @@ you can determine the board's IP address and log in using `ssh`.
</details>
**NOTE:** More generics troubleshooting can be found here : [Generic issues](../troubleshooting.html)
+ git push --set-upstream origin guppy \ No newline at end of file