diff options
Diffstat (limited to 'getting-started/machines/R-Car-Starter-Kit-gen3.md')
| -rw-r--r-- | getting-started/machines/R-Car-Starter-Kit-gen3.md | 36 |
1 files changed, 21 insertions, 15 deletions
diff --git a/getting-started/machines/R-Car-Starter-Kit-gen3.md b/getting-started/machines/R-Car-Starter-Kit-gen3.md index a89134a..e18de67 100644 --- a/getting-started/machines/R-Car-Starter-Kit-gen3.md +++ b/getting-started/machines/R-Car-Starter-Kit-gen3.md @@ -1,4 +1,4 @@ -# AGL Kickstart on Renesas R-Car Starter Kit Gen3 (h3ulcb, m3ulcb) +# AGL Kickstart on Renesas R-Car Starter Kit Gen3 V2.16 (h3ulcb, m3ulcb) Here is a non exhaustive list of hardware parts that could be used to setup the R-Car Starter Kit Gen3 board development environment: @@ -23,9 +23,9 @@ The following documents may also be helpful: Before setting up the build environment, you need to download the proprietary drivers. -* Download Renesas graphics drivers with a "click through" license from Renesas website [Link][rcar demoboard] +* Download Renesas graphics drivers with a "click through" license from Renesas website [Link][rcar Linux] and [Link][rcar Linux Drivers] * Under the Target hardware: **R-Car H3/M3** section. - + #### Note: * You have to register with a free account on MyRenesas and accept the license conditions before downloading them the drivers. @@ -36,10 +36,10 @@ Here after is an example of the typical files downloaded at the time of writing: ``` chmod a+r $XDG_DOWNLOAD_DIR/*.zip -ls -l $XDG_DOWNLOAD_DIR +ls -1 $XDG_DOWNLOAD_DIR total 8220 --rw-r--r--. 1 1664 agl-sdk 4.5M Dec 8 15:23 R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20160906.zip --rw-r--r--. 1 1664 agl-sdk 2.5M Dec 8 15:24 R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20160906.zip +-rw-r--r--. 1 1664 agl-sdk 4.5M Dec 8 15:23 R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20170125.zip +-rw-r--r--. 1 1664 agl-sdk 2.5M Dec 8 15:24 R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20170125.zip ``` ## Setting up the build environment: @@ -73,12 +73,14 @@ In case of missing graphics drivers, you could notice an error message as follow [snip] --- fragment /home/working/workspace_agl_master/meta-agl/templates/machine/h3ulcb/50_setup.sh /home/working/workspace_agl_master /home/working/workspace_agl_master/build_gen3 -The graphics and multimedia acceleration packages for the R-Car Gen3 board can be download from : - <http://www.renesas.com/secret/r_car_download/rcar_demoboard.jsp> - -These 2 files from there should be store in your'/home/ronan/Téléchargements' directory. - R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20160906.zip - R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20160906.zip +The graphics and multimedia acceleration packages for +the R-Car Gen3 board can be downloaded from: + https://www.renesas.com/en-us/software/D6000821.html + https://www.renesas.com/en-us/software/D6000822.html + +These 2 files from there should be store in your'/home/devel/Téléchargements' directory. + R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20170125.zip + R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20170125.zip /home/working/workspace_agl_master/build_gen3 --- fragment /home/working/workspace_agl_master/meta-agl/templates/base/99_setup_EULAconf.sh --- end of setup script @@ -168,7 +170,8 @@ lsblk └─sdc2 8:34 1 788M 0 part ``` -**IMPORTANT NOTE**: This is a critical operation, each computer is different and removable devices can change from time to time: so you should repeat this operation each time you insert the microSD card to confirm the device name. +**IMPORTANT NOTE**: This is a critical operation, each computer is different and removable devices can change from time to time: +so you should repeat this operation each time you insert the microSD card to confirm the device name. In the example above, we see: * the first SATA drive as 'sda'. @@ -322,7 +325,9 @@ The lighter of the 3 is “picocom” (it has less dependencies). ## Plug a USB cable from your computer to the serial CP2102 USB port (micro USB-A). -With “dmesg” you can check the device created for the serial link. Usually, it's /dev/ttyUSB0 but the number may vary depending on other USB serial ports connected to the host. To get it, you must switch the board on. +With “dmesg” you can check the device created for the serial link. +Usually, it's /dev/ttyUSB0 but the number may vary depending on other USB serial ports connected to the host. +To get it, you must switch the board on. For example: ``` @@ -590,7 +595,8 @@ Generic guide on how to add a new service in the BSP. [R-car m3ulcb]: http://elinux.org/R-Car/Boards/M3SK [R-car h3ulcb]: http://elinux.org/R-Car/Boards/H3SK [R-car yocto]: http://elinux.org/R-Car/Boards/Yocto-Gen3 -[rcar demoboard]: https://www.renesas.com/en-eu/solutions/automotive/rcar-demoboard.html +[rcar Linux]: https://www.renesas.com/en-us/software/D6000821.html +[rcar Linux Drivers]: https://www.renesas.com/en-us/software/D6000822.html [Iot.bzh AGL-Kickstart-on-Renesas-Porter-Board]: http://docs.automotivelinux.org/docs/devguides/en/dev/reference/iotbzh2016/sdk/AGL-Kickstart-on-Renesas-Porter-board.pdf [Iot.bzh AGL-Devkit-Image-and-SDK-for-Porter]: http://docs.automotivelinux.org/docs/devguides/en/dev/reference/iotbzh2016/sdk/AGL-Devkit-Image-and-SDK-for-porter.pdf [Iot.bzh AGL-Devkit-Build-your-1st-AGL-Application]: http://docs.automotivelinux.org/docs/devguides/en/dev/reference/iotbzh2016/sdk/AGL-Devkit-Build-your-1st-AGL-Application.pdf |