diff options
Diffstat (limited to 'getting-started/machines/raspberrypi.md')
| -rw-r--r-- | getting-started/machines/raspberrypi.md | 39 |
1 files changed, 0 insertions, 39 deletions
diff --git a/getting-started/machines/raspberrypi.md b/getting-started/machines/raspberrypi.md deleted file mode 100644 index e016584..0000000 --- a/getting-started/machines/raspberrypi.md +++ /dev/null @@ -1,39 +0,0 @@ -# Building the AGL Demo Platform for Raspberry Pi - -## Raspberry Pi 3 - -To build AGL demo platform for Raspberry Pi 3 use machine **raspberrypi3** and feature **agl-demo**: - -```bash -source meta-agl/scripts/aglsetup.sh -m raspberrypi3 agl-demo agl-netboot agl-appfw-smack -bitbake agl-demo-platform -``` - -## Raspberry Pi 2 - -To build AGL demo platform for Raspberry Pi 2 use machine **raspberrypi2** and feature **agl-demo**: - -```bash -source meta-agl/scripts/aglsetup.sh -m raspberrypi2 agl-demo agl-netboot agl-appfw-smack -bitbake agl-demo-platform -``` - -## Booting AGL Demo Platform on Raspberry Pi - -Follow the steps below to copy the image to microSD card and to boot it on Raspberry Pi 2 or 3: - -* Connect your sdcard in your linux machine. -* Copy output image from build machine to linux machine that is connected your sdcard. (Often, those are same machines) -* Output Image location in build machine for Raspberry Pi 2: *tmp/deploy/images/raspberrypi2/agl-demo-platform-raspberrypi2.wic.xz* -* Output Image location in build machine for Raspberry Pi 3: *tmp/deploy/images/raspberrypi3/agl-demo-platform-raspberrypi3.wic.xz* -* Unmount the microSD card and after that flash output image to it card with root user: - -*Note: the sdimage files can also be named rpi-sdimg-ota in case you have the **"agl-sota"** feature enabled* - -```bash -sudo umount [sdcard device] -xzcat [output image] | sudo dd of=[sdcard device] bs=4M -sync -``` - -* Plug your microSD card into Raspberry Pi 2 or 3 and boot the board |