diff options
Diffstat (limited to 'getting-started/source-code.md')
| -rw-r--r-- | getting-started/source-code.md | 201 |
1 files changed, 0 insertions, 201 deletions
diff --git a/getting-started/source-code.md b/getting-started/source-code.md deleted file mode 100644 index 3c5d6f4..0000000 --- a/getting-started/source-code.md +++ /dev/null @@ -1,201 +0,0 @@ -# Introduction: Building target AGL image with Yocto project - -The standard Yocto process is made of the following steps: - -* Setting up your operating system. -* Setting up the build environment for R-Car BSP. -* Downloading the proprietary drivers and installing them in the build environment (if needed). -* Build the image. -* Boot using SD-CARD. - * Create an SD-CARD. - * Configure to boot on SD-CARD. - * Copy the image to the SD-CARD. - * Boot the board on it. - -For convenience, the resulting development images are made available [Here][AGL snapshots master latest] - -If you want to bypass the build phase and quick boot the board, you can download the image tarball and the kernel then follow the installation procedure. - -## Setting up your operating system - -The very first step is to ensure that your system can run the build system of the Yocto Project. - -**Important**: it only runs on Linux - -* if your system is Windows© or iOS© you should use a virtualization solution (Virtualbox, VMWare ...) to run a Linux VM on your system. - -For AGL 6.0, Yocto Project 2.4, known as rocko, has been selected for the BSP and build system. - -Reference data for configuring your system can be found in the Yocto documentation [Here][yocto ref Manual] - -Here after an extract of this documentation for most common Linux distributions: - -* The build system should be able to run on any modern distributions that has the following versions for: - * Python - * Git 1.7.8 or greater - * tar 1.24 or greater - * GCC, … - -**Note**: - -* Python 2.7.3 or greater excluding Python 3.x, which is not supported. - -### Ubuntu and Debian - -The essential and graphical support packages you need for a supported Ubuntu or Debian distribution are shown in the following command: - -```bash -sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib \ - build-essential chrpath socat libsdl1.2-dev xterm cpio curl -``` - -**Note**: - -* Also note that for this tutorial, the utility 'curl' has been added to the list of packages to install. - -### Fedora - -The essential and graphical packages you need for a supported Fedora distribution are shown in the following command: - -```bash -sudo yum install gawk make wget tar bzip2 gzip python unzip perl patch \ - diffutils diffstat git cpp gcc gcc-c++ glibc-devel texinfo chrpath \ - ccache perl-Data-Dumper perl-Text-ParseWords perl-Thread-Queue socat \ - SDL-devel xterm curl -``` - -### OpenSUSE - -The essential and graphical packages you need for a supported OpenSUSE distribution are shown in the following command: - -```bash -sudo zypper install python gcc gcc-c++ git chrpath make wget python-xml \ - diffstat texinfo python-curses patch socat libSDL-devel xterm curl \ - python3 python3-curses glibc-locale -``` - -### CentOS - -The essential and graphical packages you need for a supported CentOS distribution are shown in the following command: - -```bash -sudo yum install gawk make wget tar bzip2 gzip python unzip perl patch \ - diffutils diffstat git cpp gcc gcc-c++ glibc-devel texinfo chrpath \ - socat SDL-devel xterm curl -``` - -## Download AGL Source Code - -The AGL source code and Yocto layers are maintained on the AGL Gerrit server. -For information on how to create accounts for gerrit see [Getting Started with AGL][Getting Started with AGL]. - -### Setting up the build environment - -In the following, your top level directory is noted as “AGL_TOP”. -For example, we will set AGL_TOP to point to a directory “$HOME/workspace_agl”: - -```bash -export AGL_TOP=$HOME/workspace_agl -mkdir -p $AGL_TOP -``` - -### Prepare Repo Tool - -AGL Uses the 'repo' tool for managing repositories. -You need to setup layers of AGL. -You can use the commands below to prepare Repo: - -```bash -mkdir -p ~/bin -export PATH=~/bin:$PATH -curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo -chmod a+x ~/bin/repo -``` - -**Note**: - -* More information about the tool 'repo' [Here][repo info] - -### Download source - -You can choose your source release - -### Download Latest Stable Release - -To download all layers for the for the latest stable release, eel 5.0.3: - -```bash -cd $AGL_TOP -repo init -b eel -m eel_5.1.0.xml -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo -repo sync -``` - -### Download Master Branch - -To download all code from master: - -```bash -cd $AGL_TOP -repo init -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo -repo sync -``` - -## Set up Build Environment Info - -AGL has created a set up script for defining the target build and desired optional features. - -To get a complete list of the options available run. - -```bash -cd $AGL_TOP -source meta-agl/scripts/aglsetup.sh -h -``` - -Once you run aglsetup.sh with your desired parameters, you can build any target desired. - -## Features supported by aglsetup - -Here is the list of features for AGL 2.1 that can be specified in the aglsetup.sh command line: - -* in **meta-agl** - * agl-all-features - * agl-appfw-smack: enables IoT.bzh Application Framework + SMACK + Cynara - * agl-archiver - * agl-ci - * agl-ci-change-features - * agl-ci-change-features-nogfx - * agl-ci-snapshot-features - * agl-ci-snapshot-features-nogfx - * agl-devel: activate development options (empty root password, debugger, strace, valgrind …) - * agl-gplv2 - * agl-isafw - * agl-netboot: enable network boot support through TFTP and NBD (see meta-netboot layer) - * agl-profile-graphical - * agl-profile-graphical-html5 - * agl-profile-graphical-qt5 - * agl-profile-hud - * agl-profile-telematics - * agl-ptest - * agl-sota: enable SOTA components and dependencies (meta-sota, meta-filesystems, meta-ruby, meta-rust are added) -* in **meta-agl-demo** - * agl-demo: enable layer meta-agl-demo and meta-qt5 - required to build * agl-demo-platform - * agl-iotivity - * agl-sdl -* in **meta-agl-devel** - * agl-audio-4a-framework - * agl-audio-soundmanager-framework - * agl-egvirt - * agl-hmi-framework - * agl-oem-extra-libs - * agl-renesas-kernel - * agl-telemetry -* in **meta-agl-extra** - * agl-localdev: add a local layer named “meta-localdev” in meta directory and a local.dev.inc conf file if present - * blsched - -For newer features or to get more details on a given feature, take a look at the configuration files stored for each feature and/or each machine in meta-agl/templates and meta-agl-extra/templates. - -[AGL snapshots master latest]: https://download.automotivelinux.org/AGL/snapshots/master/latest/ -[yocto ref Manual]: http://www.yoctoproject.org/docs/2.0/ref-manual/ref-manual.html#detailed-supported-distros -[Getting Started with AGL]: https://wiki.automotivelinux.org/start/getting-started -[repo info]: https://source.android.com/source/using-repo.html |